Used Collomix Agitator for sale (461)

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Lasdpfsy Naf Eex Amrjc Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Ledpfx Asx Dnilomreac Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: used, Savage Bros Chocolate Melting Tank Product temperature control Kettle temperature control Agitator Stainless steel Lajdpfx Amjxtqvgsrjc

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, underfeed firing system with a moving grate, output 550 kW, year of manufacture 2018, including feed screw with backfire protection, including infeed screw, including pneumatic cleaning, including flue gas recirculation, including multi-cyclone separator, including ash removal system, including control system for Schmid boilers, including electrostatic precipitator from Meisterfilter, including control system – electrostatic precipitator, including ash removal system for electrostatic precipitator, including flue gas fan. Dismantling must be carried out by the buyer. Not included: - Bunker discharge system - Chimney Information regarding the bunker discharge system: If you are interested in a moving floor or agitator discharge system, I can assist you. Laodpfx Amevgcwmoroc

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Lajdpfx Amozamu Herec Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Condition: used, This listing is for the VELP ZX4 Mixer Vortexer Ledpjxhfzgsfx Amreac The unit is in full working condition and is ready for immediate use The VELP ZX4 is a robust, high-performance vortex mixer designed for everyday lab mixing needs. With variable speed control, a patented infrared (IR) sensor mode, and a wide accessory range, it’s ideal for labs that require ergonomic and flexible operation. Key Features & Benefits Variable Speed Operation Electronically controlled vortexing with speeds from 0 to 3,000 rpm, ideal for gentle mixing or vigorous agitation. Dual Operating Modes IR Sensor Mode (patented): Automatically activates mixing when a test tube is detected—no need to press down. Continuous Mode: Maintains consistent mixing without user interaction. Universal Power Compatibility Works with a universal voltage/frequency range (100–240 V, 50/60 Hz), making it ideal for international labs. Compatible with various attachments for tubes, microplates, and small flasks. All accessories attach via simple pressure-fit—no tools required. High Chemical Resistance Durable technopolymer casing offers optimum resistance to common lab chemicals and solvents. Exceptional Stability A zinc alloy base provides outstanding stability even at high speeds. Large anti-slip rubber feet ensure the mixer stays securely in place during operation. IP42 Protection Designed with IP42-rated protection against particle ingress and liquid splashes—safe for demanding lab environments Applications Mixing of microcentrifuge tubes, PCR tubes, vials, and microplates Ideal for biology, chemistry, and biochemistry labs Perfect for repetitive tasks—IR sensor mode reduces wrist strain

Condition: used, Year of construction: 1983, Manufacturer : Moritz Year : 1983 Type : Vacuum mixer Ljdpfoy E T Swjx Amrsac Emulsifying motor: 3000 rpm – 3 kW Volume : 50L Vertical stainless steel tank: Diameter 400 mm / Depth: 450 mm Jacketed Total draining 2 variable-speed agitators on the lid - 2 three-bladed propellers: 0 to 200 rpm - Anchor with scrapers: 0 to 100 rpm Two-speed bottom-mounted turbo emulsifier with recirculation Built-in vacuum pump Electrical cabinet A hot water unit is available on request; this request may be subject to a separate quotation.

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Lajdpfx Aschqxxjmrec Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h Lasdpfxjgfm Ryo Amroc * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Ledpjfmqq Eofx Amrjac Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: reconditioned (used), Year of construction: 2023, All wear parts are new. Only 704 operating hours. Special price for a lightly used demonstration unit. Base machine: €29,990 net. Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Lodpfx Amod N Dnherjac Weight: 950 kg. . Hydraulic pre-compaction via sliding plate. Main press cylinder. Vertical cylinder. . Level sensor: yes. . Requirements for the raw material: - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg. - The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Ljdpfxe E Dquo Amreac Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size less than 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Pay attention to: sand, stones, and minerals - Compressed using press tongs Lsdpfx Aefbb Aremreac - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options at an extra cost: Plant construction / mütek system technology: - mütek Shredder MRZ shredding technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Transport screws - Silos - Control system interfaces of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Operating principle: The machine has a silo with a stirrer. In each of the 4 corners of the storage silo, there is a vertical screw that compacts the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either when the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for automatic feeding of the heating boiler Format Ø 30 mm Throughput up to a maximum of 310 kg/h Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces via screw feed. Fully automatic 24-hour operation possible. High energy efficiency. Briquettes/pellets with consistently high quality and density. For automatic feeding into industrial furnaces Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format is an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be processed without any problems (various biomass and agar-based materials).

Condition: new, Brand new PERRYmix model HVP 2000 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 2000 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 5.5 kW electric motor via NORD gearbox. - Swing arm driven by 1.5 kW electric motor via NORD gearbox. Material design: Ljdpfx Amezbub Rsrjac - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 1000 with stainless steel arm and tilting half-circle top cover)

Condition: new, Brand new PERRYmix model HVP 600 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 600 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: Laedpfxjzbubwo Amrsc - Screw agitator driven by 2.2 kW electric motor via NORD gearbox. - Swing arm driven by 0.37 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 300 with stainless steel arm and tilting half-circle top cover)

Condition: used, Used Brogli model MH-5 stainless steel vacuum process vessel. - Manufacturer: Brogli - Model: MH-5 Vessel: - Total capacity of vessel: 6,8 litre - Working capacity of vessel: 5 litre - Vessel rated: -1/0,5 bar - Jacket rated: 1 bar Mixing system "Multi-homo": - (1) anchor agitator with scrappers - (1) ribbon agitator - (1) homogenizer system Includes: - control panel - heating unit - lowering/raising the vessel using a hand-operated wheel Laodpfx Ajzbuibjmrsc Specifications: Vacuum (Y/N): Y Capacity: 5 Material Of Construction: AISI 304 Jacket (Y/N): Y

Condition: used, Used Stephan Model UM 60 E high intensity/universal vacuum mixer. - Manufacture: Stephan, Germany, now Proxes group. - Model: UM60 E (electrically top driven screper). - Vessel: Stainless steel vessel total volume 60 litre, working 6-40 litre. - Knife/Drive: S-blade type of agitator driven via dual speed el. motor 5.5/7.5 kW, 1500/3000 rpm, 50 Hz, 400 V. Ljdszbug Hspfx Amrsac

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. Ljdpfxev I S D Se Amroac 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: good (used), Item: A-7577 Cream tank 10.000 L Stainless steel Process Cream tank, double jacketed, insulated scrape agitator from top, CIP mounted at top. 3 adjustable legs, Ledpfx Aeh E Dp Aemrjac manhole at top. capacity 10.000 L. We can offer 2 pieces from stock.r diameter 2458 mm

Condition: excellent (used), A-4200-Tebel Cheese Vat Cheese Vat, capacity 10.000 L, Alfa Laval - Tebel , Good condition, 1 piece, closed Type with agitator, double jacket, Insulated. Heating jacket on lower half of cylindrical section • Cylinder length: 1.750 mm • Cylinder diameter: 2.860 mm • Internal lighting • Manhole with sliding door on top position • CIP connection • Outflow: 4" Outflow height: 400 mm Minimum level Weight 2.800 kg (L x W x H): 3.350x3.000x3.200 mm Lodoh A Hb Ujpfx Amrsac

Condition: used, mileage: 318,699 km, power: 235 kW (319.51 HP), first registration: 09/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, color: blue, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, * ABS * ASR (traction control) * On-board computer * Cruise control * Hill-start assist * Analog tachograph * Electric window regulators * Electrically adjustable mirrors * Mirror heating * Central locking * Roof hatch * Rear window * Longitudinal and transverse differentials locks * AP axles * Steel bumper * Air dryer Laodjw S Agpjpfx Amroc * Air-suspended driver's seat * 16-speed * Suspension: leaf spring * Payload: 6,080 kg * Retarder: engine brake ----Body: Schwing concrete pump P 2023-110/75 RB, 4-section, Z-fold, 4 arms, distributor boom KVM 24-4 H (Vector), max. vertical reach 23.1 m, max. horizontal reach 19.5 m, max. depth reach 13 m, slewing range 370°, delivery line (pipe DN) 125, 3 m end hose, max. output 114 m³/h, max. delivery pressure 80 bar, radio remote control + cable remote, fully hydraulic 4-point outriggers, oil cooler, centralized lubrication, high-pressure water pump. Read operating hours: Pump 5,133 h, Boom 6,369 h, Water pump 555 h, HP-pump 45 h, Agitator 9,820 h, Vibrator 581 h----Low folding height (under 5 m), also ideal for indoor operation! Sale to commercial customers only. FOR EXPORT SALES, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION SUBJECT TO CHANGE, ESPECIALLY EQUIPMENT AND ACCESSORIES. All contracts for sale, invoices, pro forma invoices, orders, and sales discussions are subject to our general terms and conditions (see legal notice/imprint).

Condition: good (used), Year of construction: 2016, Leonhardt AG2 Twin head dosing machine Serial: 1401449 Lajdpfx Ametuf Nborjc 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph

Year of construction: 2001, condition: good (used), VMI 2936L mixing vessel Lajdpoqqhh Rofx Amroc 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph

Year of construction: 2001, condition: good (used), VMI 3500L mixing vessel 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph Lasdpfxeqqhhxj Amrec

Condition: good (used), Agnelli Automatic sheeter Ljdpfetu N A Tjx Amroac Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph