Used Co2 Reducer for sale (4,036)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS07, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Nsdpfxoz Inbyj Abyedc Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: ready for operation (used), IQ 501 with interface, like new! The innovative IQ-501 for Intelligent Quality Care elevates consistency and registration accuracy to a new level. The IQ-501 provides extensive automation for image position and registration, as well as color control. This is achieved through our proprietary closed-loop control system, which monitors and corrects printed output. The automation provided by the IQ-501 also extends to color calibration and profiling – all designed to reduce operator time and print waste while increasing productivity. Ndsdpjz Eik Djfx Abyjc For Konica AccurioPress c6100/3080/3070 In perfect condition! Also available for Accuriopress 4080/4070 with vi514 for €2,300. For more details, please refer to the attached PDF document. As an experienced retailer of used copiers, we have developed considerable expertise in packing and pallet shipping, guaranteeing that our customers receive machines in perfect condition. We ship copiers that originate from and have been maintained by Konica Minolta France. If you have any questions, please don't hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: new, OptiProLam 360 Automatic Laminator with Digital Foiling The OptiProLam 360 is a fully automatic laminating and digital foiling system designed for today's commercial and digital print environments. Handling sheet sizes up to 360 x 570 mm, the OptiProLam 360 delivers exceptional lamination quality, premium digital foiling capabilities, and outstanding production efficiency in one compact finishing solution. With automatic suction feeding, pneumatic roller pressure and the ability to laminate both sides of the sheet in a single pass, the OptiProLam 360 is designed to increase productivity, reduce operator intervention and open up new opportunities for value-added print. Key Features Sheet size up to 360 x 570 mm Single-sided lamination Double-sided lamination in one pass Production speeds up to 9 metres per minute Automatic suction feeder Oil-filled heated chrome laminating roller 150 mm pile feeder capacity Automatic sheet registration with adjustable overlap Self-centring sheet guides Pneumatic roller pressure system Pneumatic burst separation with micro-perforation Touchscreen speed and temperature control Adjustable de-curling system Integrated digital foiling rewinder Advanced Lamination Performance The OptiProLam 360 features an oil-filled heated chrome laminating roller, designed to provide even and stable heat distribution across the full working width. Combined with adjustable pneumatic roller pressure, this helps deliver reliable laminate bonding and a smooth, professional finish across a wide range of digitally and lithographically printed materials. Benefits include: Oil-filled heated chrome roller for stable, even heat distribution Pneumatic roller pressure for consistent pressure across the sheet Reliable laminate bonding Smooth, professional finishing Consistent results across a wide range of printed media With production speeds of up to 9 metres per minute, the OptiProLam 360 combines professional lamination quality with the productivity required for busy digital print environments. Nodez H Sa Repfx Abyedc Single & Double-Sided Lamination in One Pass Designed for maximum efficiency, the OptiProLam 360 offers both single-sided and double-sided lamination in a single pass. Unlike single-sided systems that require two passes for double-sided lamination, the OptiProLam 360 completes the process in one operation, dramatically improving workflow efficiency and reducing production time. Benefits include: 50% reduction in production time Increased productivity and throughput Reduced labour requirements Reduced operator handling Faster turnaround times Consistent, high-quality results on both sides of the sheet Whether producing brochures, book covers, presentation folders, menus, packaging, or premium marketing materials, the OptiProLam 360 enables more work to be completed in less time. Specifications Manufacturer Glendale Model OptiProLam 360 Condition New Stock Number 115002 Max sheet size 360mm x 570mm Min sheet size 150mm x 280mm Sheet feeder Yes, suction feed Feeder capacity 150mm Paper weights 80gsm - 350+gsm Speed Up to 9 metres per minute Single & double-sided lamination Yes Roller pressure Pneumatic Sheet separation Automatic, via pneumatic pressured roller Warm up time 5 minutes Digital foiling Yes, rewinder included Air compressor Included Power supply 220/240v 50/60Hz Machine weight 312kg Dimensions (L)1990mm x (D)750mm x (H)1420mm

Year of construction: 2023, condition: like new (used), functionality: fully functional, ESCO Airstream Gen 3 Vertical Laminar Flow Cabinet Type: LVG-3AG-F8 Airstream Gen 3 Vertical Laminar Flow Cabinet While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet. The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream Gen 3 Vertical Laminar Flow Cabinet. Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment Nsdpfx Aoz D Tkfebyedc

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology Nsdpebu Dzisfx Abyedc - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Ndjdpfx Abszp Nt Aoyoc Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Nedpfspq If Dex Abyodc Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Ndedpfezhx A Rjx Abyec Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min Ndodpfxsz Nyvye Abyoc - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, mileage: 17,635 km, power: 120 kW (163.15 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 1,907 kg, maximum load weight: 893 kg, overall weight: 2,800 kg, wheelbase: 3,200 mm, next inspection (TÜV): 10/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,831 mm, loading space width: 1,650 mm, loading space height: 1,350 mm, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, soot filter, Exterior * Heated and electrically adjustable exterior mirrors * Mounting points in the roof frame * Tires 225/55 R17 * All-season tires * Full wheel covers Interior * Co-driver's seat, two-seater * Comfort driver's seat Nsdpezxpx Djfx Abyedc * Lumbar support for driver's seat * Partition wall, continuous, with 1 window * Lockable glove compartment Safety * Adaptive brake light * Thorax-pelvis side airbag for driver * Passenger airbag * Thorax-pelvis side airbag for passenger Comfort and Environment * Rearview camera * Rear doors, double-wing, opening up to the side panel * Attention Assist * Hill-start assist * ECO start-stop function * Headlamp assistant * Blind Spot Assist * Traffic Sign Assist * Mercedes-Benz emergency call system * Multifunction steering wheel * Cruise control * BlueEFFICIENCY package Multimedia * Live Traffic Information * Navigation * Instrument cluster with color display * Digital radio (DAB) with Bluetooth hands-free system Equipment lines and packages * Parking package * Winter package Condition/Documents * COC papers Other * 2-way speakers in the front * 6-speed manual transmission TSG 380 * Active Brake Assist * Active Lane Keeping Assist * Trailer load up to 2,800 KG possible * CO2-optimized brake system * Digital extra: Remote Services Plus * Electrical system for trailer socket * Emission class Euro 6 * Vehicle HVO compatible * Generator 14 V / 250 A * Speed limiter 210 km/h * Seatbelt warning for co-driver * Semi-automatic climate control system TEMPMATIC * Heater for windshield washer system * Wooden floor * Interior trim for the cargo area up to roof height (wood) * Intelligent Speed Assist (ISA) * Trunk comfort closing * Communication module (LTE) for digital services * Load securing rail system * LED strip in the cargo area * Steering wheel adjustable in inclination and height * MBUX multimedia system * Model update * Mopf II * Engine OM 654 DE 20 LA 120 kW (163 hp) 3800/min * Multi-button remote control * Premium complete wheel protection (3 years) * Tire pressure monitoring at the front and rear axle, wireless * Signs/Printed materials in German * Driver's seat occupancy recognition * Seat heating for driver * Seat cushion depth adjustment for driver * Fabric Caluma black * First aid kit * Fleece battery 12 V 92 Ah * Warning triangle * Heat-insulating glass all around * Registration as a truck * Registration certificate, part II * Model year 25 Other: * Nationwide delivery for 399 € net plus VAT (474.81 € incl. VAT). * For all vans: On request, 12 or 24 months of Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * Ex-rental vehicle * No liability for printing and spelling errors * Errors and prior sale reserved. - .

Condition: used, This listing is for Watson Marlow 323 Peristaltic Laboratory Pumps Njdpsygmdhjfx Abyedc Each unit is in full working condition and is ready for immediate use The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wear

Condition: used, This listing is for a Watson Marlow 530S Peristaltic Pumps The units are in full working condition and ready for immediate release. Overview & Function The Watson‑Marlow 530S is part of their 500 series cased peristaltic/process pumps. Industrial Provider It’s used for precise fluid metering, dosing, or transfer in laboratory, industrial, pharmaceutical, food & beverage, water treatment, and other process environments. As a peristaltic pump, it works by compressing a flexible tube (or tubing element) with rollers or shoes, pushing fluid forward while the fluid never contacts moving mechanical parts (only the tubing). This gives isolation and reduces contamination risk Because fluid only contacts tubing, the risk of contamination or cross‑contamination is low, and maintenance is relatively straightforward (replace tubing / elements). Very good turndown ratio (i.e. ability to dial down flow finely) thanks to the wide speed control range. Nedjxv Ak Iepfx Abyjdc The user interface is designed for operational simplicity and clarity. Offers flexibility in control: it supports analog and digital remote control, SCADA integration, and bus communication. Ability to use different pumpheads and tubing materials to suit pressure, chemical compatibility, and flow requirement

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector Nodpfx Absz Rl Hyjyjdc - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Coolant pump and chip tray Exact scope of delivery according to photo series Ndedsxflr Hepfx Abyec The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: new, MLS Lanny DDM Pressure Control System PN40 – 2x Shut-off Valve – 24V – NEW / UNUSED Offered for sale is a new, unused, high-quality industrial pressure control system from MLS Lanny GmbH, featuring a dome-loaded pressure regulator, two pilot-operated shut-off valves, and an electronic proportional control valve. This system is a professional, specialized assembly designed for industrial pressure and fluid technology applications. It is particularly suitable for mechanical and plant engineering, industrial pressure regulation, test bench technology, and as a spare part for existing industrial installations. The complete unit is constructed from robust, precision-engineered aluminum and brass components. Technical Specifications and Equipment 1. Dome-loaded pressure reducer – MLS Lanny GmbH Type: DDM D0 A0 (per nameplate; partially difficult to read) Pressure range: 0–20 bar Ratio: 1:4 Nominal pressure: PN40 Nodpfx Aez R D Ntobyjdc Nominal size: DN54 Electrical control: 24 V DC 2. Two shut-off valves with pilot control Manufacturer: MLS Lanny GmbH Shut-off valves: PN40, DN35 Pilot valves: PN10 Operating voltage: 24 V DC Power consumption: 3 W per pilot valve Quantity: 2 complete valve units 3. Electronic proportional control valve Manufacturer: MLS Lanny GmbH Model: EFL1B99Ju V2_IP54 Operating voltage: 24 V DC Current consumption: 1.2 A Setpoint signal: 0–10 V Protection rating: IP54 Serial number: 137170 Design: Control valve with flange connection Condition NEW – UNUSED – STOCK ITEM The complete pressure control system is new and has not been put into operation. Minor surface marks resulting from storage may be present; these are visible in the original photos. The system is in the condition shown and is offered as a complete, pre-assembled unit. A recent functional and leak test has not been performed. Key Features High-quality industrial design by MLS Lanny GmbH Complete pressure-regulating and shut-off valve unit Two pilot-operated (electric) shut-off valves Electronic proportional control valve with 0–10 V setpoint signal Rugged aluminum and brass construction New and unused Ideal for mechanical engineering, plant construction, maintenance, and industrial spare parts supply Scope of Delivery Includes the complete MLS Lanny pressure regulation system shown, consisting of a dome-loaded pressure regulator, two pilot-operated shut-off valves, an electronic control valve, and assembled connecting components. Supplied as shown in the original images.

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection Ndodsk Dpxljpfx Abysc • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Nsdpovkw Dvjfx Abyedc Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. Nsdpfxjzknwco Abyedc The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Program runtime: 5,812 hours Spindle runtime: 5,740 hours Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Travel Z-axis: 1300 - mm Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Ndsdsyuvcispfx Abyjc Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 2025, Technical details: content: 1000 cbm capacity in bar: 11 total power requirement: - kW tank capacity: 1000 l operating pressure: 11 bar dimensions of the machine approx. HxWxD: 2,32 x 0,8 x 0,8 m weight: 260 kg Nsdpfjy I Rr Tjx Abysdc • Function: Serves as a buffer and storage medium in compressed air stations, separates condensate, and reduces the frequency of compressor cycling. • Quality standards: Manufactured in accordance with the European Pressure Equipment Directive (2014/68/EU) or 2014/29/EU (simple pressure vessels) as well as the AD 2000 guidelines. • Surface protection: Typically hot-dip galvanized inside and out in accordance with DIN EN ISO 1461 for maximum corrosion protection and durability. • Operating data: Designed for temperatures typically ranging from -10 °C to +50 °C (in some cases up to +80 °C) and a standard operating pressure of 11 bar with a test pressure of 16 bar. • Design: Vertical design with welded longitudinal and circumferential seams. *

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Nsdpfx Absvz Advsyodc Torch head Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Nedpfx Abjwnhxdoyjdc Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - CE marking present: Yes - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Includes monitor, keyboard, and mouse. Software: RayJetManager pre-installed. Njdoz Suruepfx Abyjdc

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Ndodpfx Asz Nir Rsbysc Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: June 2026 Excellent condition, low operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z): 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer with 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Ndsdpfx Ajyzxd Djbysc Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 16.10.