Used Cfs Thermoformer for sale (408)

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: Lodpetndpzofx Amnsrl - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Ledpfxsv Ta D De Amnorl Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request! Lrjdpfxewpd Rro Amnjl

Year of construction: 2014, condition: used, We offer for sale a cutter from the renowned BIELOMATIK brand – model CFS 145/23. The machine was manufactured in 2014 and has been used by a single owner since new. The unit has undergone thorough servicing, is fully equipped, technically sound, and ready for continued trouble-free operation. Technical details: - Roll diameter: max. 1,525 mm; min. 120 mm - Roll width: max. 1,100 mm - Roll weight: max. 2,000 kg - Roll loading diameter: min. 500 mm - Machine speed: max. 300 m/min - Cutting frequency: max. 366 cuts/min = 22,000 cuts/h - Core diameters: 100, 150, 200, 300 mm. If you have any questions or would like to inspect the machine, please contact us. Lrjdpox Scykofx Amnel

Year of construction: 1997, condition: excellent (used), Multivac R 230 MC Thermoformer Manufacturer: Multivac Model: R 230 MC Machine number: 179 Year of manufacture: 1997 Power supply: 400 V, 3 phases, 50 Hz Power: 15 kW Current consumption: 36 A Film width: 340 mm Tool format: (2×) 310 × 215 mm Overall machine dimensions: 5500 × 950 × 2000 mm Lodpfx Aex E Dpgomnjrl Multivac film scrap suction unit, type: F-CEVF 3718-3 Suction unit dimensions: 600 × 700 × 1400 mm No vacuum pump No discharge conveyor The Multivac R 230 MC Thermoformer is a versatile and reliable machine designed for forming, packing, and sealing food products in both rigid and flexible film packaging. The machine enables the production of dual-cavity packs (2× 310 × 215 mm), ensuring high throughput and consistent packaging quality. The R 230 MC model is a proven solution for food processing facilities seeking a robust and efficient packaging system. The integrated film scrap suction unit improves workplace cleanliness and ergonomics.

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute Lredpsxtp I Iofx Amnsl 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m Lsdpfx Asppwx Esmnsrl 5 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum Lrodpfsft Sccex Amnjl -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg + 500 kg foil

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Profile bending machine model 17-PB-00 by FUX, Austria, in excellent condition. Dry processing (no oil), with hot-air heating, suitable for circular and arched PVC profiles for windows, doors and façade elements. The machine consists of three working stations as shown in the photos, forming a complete line for bending PVC profiles into circular and arched shapes. Lrodpfxsx Dq T Hs Amnjl Application: bending of circular/arched PVC profiles Process: dry processing with hot air (no oil required) Three integrated working stations for profile heating, forming and handling In very good working order, ready for use in production Transport / shipping: Transport costs are borne by the buyer. Shipment will be arranged after consultation, in order to agree on the most suitable means of transport and method of dispatch. For further technical details, photographs or to arrange an inspection, please contact us by email.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. The machine is still in production mode, but is available immediately. Lrodpfx Amorh E Ibenel

Condition: like new (used), Year of construction: 2021, Brand new Multivac R245 thermoformer. Has never even been connected. 560mm wide bed, various die with pack sizes as seen in photos. Includes; vacuum pump, trim bin, water chiller and Multivac CL230 labeller. Cost in excess of £500,000. Machine is currently in abroad, bought for a project which was cancelled. Due to land in UK in May. Lrsdpfx Aoyz T H Temnol

Condition: new, Year of construction: 2026, pressure 100 t Lrjdpfeyfwywsx Amnsl throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm Lrodpfxsyfwxto Amnel - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, functionality: fully functional, VFFS machine with volumetric cup filler for granules. PLC controlled, operation via touch screen, pneumatically driven cross sealing. Technical data: bag size: L20-160mm & W~22.5mm; dosing range: 1-100g; max. speed of the machine in neutral: 50 cycles/minute; suitable film: laminated film, heat sealable; power supply: 220V, 50Hz; power consumption: 2kW; air pressure: max. 0.6MPa; compressed air consumption: 2m³/h; Lsdpev Hnzqefx Amnorl dimensions: ~ L800xW700xH1800mm; weight: ~ 280kg.

Condition: used, Year of construction: 2009, gearing type: other, first registration: 01/2009, color: orange, mileage: 1,001 km, empty load weight: 650 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Salt spreader approx. 1.5m³ The salt spreader ran on a Unimog U20! Body spreader with 4x support legs! Dead weight approx. 650kg! Salt spreader approx. 1.5m³ Capacity liquid salt approx. 645l ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lrjdpet E R Dbsfx Amnel - .

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 59800 € 1130.22 € 100 to 400 mm 800 x 500 mm 500 mm 110 mm/s 10 mm/s 160 mm/s 11 kW 1900 mm 1700 mm 2930 mm 5500 kg 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Lodpowmwvcofx Amnorl Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations

Condition: new, Year of construction: 2025, C FRAME SINGLE ACTING HYDRAULIC PRESS MODEL CFSS100 /100 TON Ram Cylinder Capacity (Ton) 100 Ton / 250 Bar Min. Working Pressure (Bar) 30 Bar Max. Working Pressure (Bar) 250 Bar Main Cylinder Diameter Ø220mm * 1 Pc Auxilary Cylinder Diameter Ø 50*35 mm * 2 Pcs Table size (mm) 800x500 mm Stroke (mm) 400mm Daylight (mm) 500mm Advance Speed (mm/sec) 110 mm/sec Return Speed (mm/sec) 160 mm/sec Ledpfxjwbtihe Amnjrl Working Speed (mm/sec) 10 mm/sec Motor (Kw) 11 KW Pump (liters) 26 liters / 19 CC Overall Dimension (LxWxH) 1900x1700x2930mm Weight (Kg) 5,500 KG

Year of construction: 1973, condition: used, Illig UA100d Vacuum Forming Machine, Manual Loading of Material Sheets, Forming Area 960 x 560mm. Serial No. 2167 (1973). Country of Origin: Germany Lredpoy Shcqjfx Amnsl Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Packaging Automation Ltd inline sealing machine. Supplied with 3 x sets of tooling for different sized punnets and some spare parts. This unit was purchased new and run for 6 x months per year. Model – Eclipse SL4. Serial number – EC34-MC-00214. Date of manufacture – 2021. Maximum output - up to 75 packs/minute (with the 5x1 format tooling setup). Tooling: Tooling Set 1 - 5 x 1 format with arms. THERMOFORM 773 / ECSL4-TL-00644 / Seal RL=669mm. Tooling Set 2 - 4 x 1 format with arms. TERMOFORMAS 691 TRAYS / ECSL4-TL-00150 / Seal RL=581.75mm. Tooling Set 3 - 4 x 1 format with arms. PACTOV 5550 TRAY / ECSL4-TL-00159 / Seal RL=531mm. Belt width - 290mm wide. Overall dimensions - 3200mm long x 1000mm wide x 2000mm high. Weight - 800 kg. In excellent working condition. Ljdoy S E S Aepfx Amnjrl

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Tria Model: Ledjwnx H Sopfx Amnsrl 70 kW Condition: ready for operation (used) RIA S.p.A. Ideal for medium-to-high throughput applications. Designed for efficient inline or standalone size reduction of sheet, cups, profiles, and other plastic waste. Construction: Built-heavy-duty, suitable for inline integration under thermoformers or as standalone units.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Lredpfx Asy Tu Tfjmnsl Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: used, mileage: 590,000 km, first registration: 08/2018, axle configuration: 4x2, wheelbase: 5,700 mm, color: other, driver cabin: sleeper cab, total length: 9,980 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2018, Equipment: ABS, electric window regulation, power mirror, tail-lift, = Additional options and accessories = - Disc brakes - Immobilizer - Tailgate = Remarks = DAF CF 290, 2018, 590,000 km, Euro 6, Space Cab, Rear closing tailgate, Hardwood floor, Slidingroof = More information = Lrjdpsy Tn Susfx Amnel Max. front axle load: 7500 kg Max. rear axle load: 11500 kg Empty weight: 9.615 kg Carrying capacity: 9.485 kg GVW: 19.000 kg Tail lift: tail lift APK (MOT): tested until 02/2027 Registration number: 53-BLG-4 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | BUSCH MINK MM 1252 AV VACUUM PUMPS A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch Lrjdpey Tlcwofx Amnel • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h • Final Vacuum: 100 hPa (0.1 bar) • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Year of construction: 2014, operating hours: 44,309 h, condition: ready for operation (used), overall weight: 18,000 kg, total width: 9,600 mm, total height: 7,650 mm, product length (max.): 15,000 mm, Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details. • Total cycles: 1,260,207 • Operating voltage: 3 / N / PE AC 400 / 230 V • Frequency: 50 Hz • Control voltage: AC 120 V / DC 24 V • Valve voltage: DC 24 V • Connected load: 172 kVA • Nominal current: L1: 279 A, L2: 275 A, L3: 261 A • Compressed air class: 4 • Pneumatic connection: G 1/2" • Air consumption: 150 l/cycle • Operating pressure: 6 bar • Cooling water inlet: G 1" • Cooling water max pressure: 3 bar • Cooling water max temp: 90° C • Lubrication interval: 800 cycles Lredpfx Aey Rpdtsmnjl

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW Lodpfey A D Ecex Amnorl with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684