Used Barsso Twin Shaft Paddle Mixer,Type Barmix 300L for sale (42,884)

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. Iedsyg Eghepfx Amloif The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Isdeycuuyopfx Amljif Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 2023, condition: ready for operation (used), A continuous twin-shaft paddle mixer WAM is available. Throughput capacity range: 5m³-12m³/h, max. liquid addition: 20%, material: 1.4404, process: mixing/conditioning/granulation/neutralization, weight: approx. 700kg. Documentation available. An on-site inspection is possible. Ijdpfx Aeywlpromloif

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 145 mm, Feature | Gildemeister Twin 42 RG2 Control system | Siemens 840D Powerline Turning diameter | 145 mm Iiedpjzl Drxefx Amlof Max. bar diameter | 45 mm Spindle head | Flat flange 120 h5 Chuck | 130 / 140 mm Main spindle speed | 20–7,000 min⁻¹ Main spindle power | 28 / 22 kW (40/100 % ED) Main spindle torque | 180 / 140 Nm Counter spindle | Yes, same power X-axis | 220 mm Z-axis | 320 mm Y-axis | ±30 mm Rapid traverse X/Y/Z | 30 / 15 / 30 m/min Turret | 2 × 12 stations Tool holder | VDI 25 Machine weight | approx. 5,300 kg Connected load | approx. 40 kVA Design | 60° inclined bed, linear guides Chip conveyor Bürener Type SPE 63/30-250 Z60 Tool monitoring system by Artis, Type CTM Tailstock mounted on the counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Bar machining package consisting of: Part removal device Workpieces can be automatically unloaded from both the main and counter spindle Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change toolholders, size 42, Hainbuch Spanntop Connection for bar feed Bar loader magazine by IRCO, Type SiMag 42

Condition: like new (used), Year of construction: 2021, Bainite BM 95 L INTERMESHING rubber internal mixer / available immediately Iedpjy E I Awsfx Amloif Model: 95 L IM Intensive mixing of various rubbers Rotor type: HP-5 Type Design Tank capacity: 95 liters Dosing opening size: 860mm x 407.7mm Dosage (Kg.): 95 x Sp. Gr. compound x filling factor The filling factor is a function of the viscosity of the compound, the rotor speed and the pressure on the suspended weight. It is a value between 0.65 and 0.90. A typical charge size for a rubber mixture is 95 x 1.15 x 0.65 = approx. 72 kg / charge. Motor power: 420KW, 1000RPM, 415V, 50 Hz AC Motor Rotor speed: 6 to 60 rpm Active cycle time: Continuous Discharge door: Hydraulically operated sluice door in the side of the chamber: Peripherally drilled Floating weight: Hydraulic operation The mixer: approx. 10t The main motor: approx. 5t The main gearbox: approx. 5t The main control panel: approx. 1.5t

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, We are offering this as-new Anthratec FM200W drum mixer, year of manufacture 2025. Manufacturer: Anthratec Model: FM200W Year: 2025 Condition: As new Category ID: 507 Type: Drum mixer Details: The FM-200 drum mixer features modern frequency inverter control (FU control) and a timer function, ideal for industrial applications. The machine offers stepless speed regulation from approximately 6 to 26 rpm, allowing for optimal adjustment of various mixing processes. The integrated timer enables precise runtime settings; after the preset time elapses (up to 99 hours, 59 minutes, and 59 seconds), the machine stops automatically. Control is provided via reliable Siemens technology, installed in a robust Rittal control cabinet. For added safety, a braking motor securely locks the drum holder during loading. This can be released via a button in the handling area, allowing for manual drum rotation if necessary. The equipment also includes an emergency stop switch and electronic monitoring of the protective enclosure with automatic machine shutdown. The machine is supplied ready for connection with a 5-meter power cable, including a CEE 16A plug. A particularly practical feature is the integrated steel drip tray with a volume of approx. 220 liters. It is designed so that when shifting the protective housing, the tray moves under the machine, freeing up the handling area. Additionally, the machine is forklift-compatible for easy transportation and loading. Ijdpfsy D I N Ujx Amlsif A major advantage of this machine is its flexibility: Various collets are available from the manufacturer, so in addition to the currently installed holder for a 200-liter bunghole drum, other container sizes can also be processed without issue. Manufacturing is according to the latest standards, exclusively with European components and in high-quality “Made in Germany” quality. Complete documentation and a CE declaration of conformity are included. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, rotational speed (min.): 2,947 rpm, input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, Product Description: ABB M3HP 180MLB (2019) ⚙️ Device Type: Three-phase, low-voltage squirrel cage induction motor, ABB M3HP series – designed for industrial applications requiring high reliability, energy efficiency, and long service life. 🔍 Construction and Features: - Model: M3HP 180MLB - Housing: High-strength cast iron, mechanically durable and corrosion resistant - Cooling: IC411 (external self-powered axial fan, integrated under protective cover) - Protection rating: IP55 – protection against dust and water jets from any direction - Mounting configuration: B3 – foot-mounted (other variants, e.g., B5, available within the same motor family) - Bearings: High-quality ball bearings, suitable for continuous operation - Lubrication: Relubrication possible (grease nipples on housing available in many versions) ⚡ Electrical Specifications: Iisdpfew Ifb Uex Amlof Parameter Typical Value (for 4-pole version) Rated power 22 kW Supply voltage 400 / 690 V (Y/Δ) Frequency 50 Hz (optionally 60 Hz in alternative configuration) Number of poles 4 (approx. 1500 rpm at 50 Hz) Rated current approx. 40–42 A at 400 V (exact value per nameplate) Efficiency class IE2 or IE3 (depending on factory version) Insulation class F (winding temperatures up to 155°C permitted), utilizing class B 📏 Mechanical Dimensions: Parameter Value (typical IEC data) Shaft height 180 mm Shaft diameter 48 mm Shaft length 110 mm Mounting holes spacing (feet) 279 x 279 mm Overall length approx. 580 mm (incl. fan and cover) Weight approx. 180–210 kg (depending on execution) ⚠️ Dimensions may vary slightly depending on the version – for details refer to ABB documentation (IEC 60072-1 compliant). 🏭 Application: The ABB M3HP 180MLB motor is widely used in industry, particularly in: - Pump stations and hydraulic systems (centrifugal, deep-well, and circulation pumps) - Fans, blowers, HVAC systems - Belt conveyors, production lines - Mixers, mills, for both intermittent and continuous duty - Specialized machinery in food, wood, and chemical industries ✅ Key Advantages of the M3HP 180MLB: - High reliability – proven ABB design, robust cast iron housing, resistant to harsh environments - Energy efficiency – compliant with IE2 or IE3 standards (lower power consumption) - Easy integration – IEC standard compliance, universal dimensions, wide range of accessories - Customizable – options with PTC sensors, encoders, brake, various mounting configurations - Long service life – relubrication capability, premium grade bearings - Quiet operation – low noise level, meets environmental standards 📦 Condition and Storage: - Year of manufacture: 2019 - Factory-new, unused motor, stored under controlled conditions (dry, vibration-free, in accordance with ABB guidelines) Price is per unit – 2 units available. Immediate delivery.

Condition: like new (used), Generally overhauled machine Price: 4.500EUR Dough mixer Iisdpsx N Efdefx Amlsf With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 50kg of flour Voltage: 400V / 50Hz

Condition: like new (used), Generally overhauled machine Price: 4.000EUR Dough mixer Manufacturer: Diosna With paddle Iiedpfx Aox N Egbsmlef Stainless steel bowl Volume: 180 liters Dimensions: 90x95x135cm Electric power: 3.5kW Voltage: 380V 50Hz

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Iijdpfx Amszp E Sbslsf Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers. Iodpfsyrxwwjx Amloif

Condition: used, Manufacturer : Clextral Model : Evolum 32 Isdpfoy Abclox Amloif Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on Iodpfx Aszbypyjmlsif  

Condition: used, Year of construction: 2001, functionality: fully functional, total length: 1,900 mm, total width: 1,900 mm, total height: 2,900 mm, For sale: Wolfking mixer Type: SFG1500/250 Dimensions: 185x210x295 cm Iijdpfszgt S Djx Amljf Includes knife and sieves Manufacturer: Wolfking Danmark A/S 400V; 50Hz; 2001; 2000 kg Overall dimensions: height 290 cm, width 190 cm, length 190 cm Net price: 11,000 EUR

Year of construction: 2022, condition: like new (used), functionality: fully functional, LUTETIA mixer loader – 250 kg capacity For sale: a professional loader/lifter for a LUTETIA mixer, entirely made of stainless steel. Iisdpfx Asztz Rhsmlef Equipment purchased in 2022, used but fully refurbished by Chantalat. It has never been used in our facility due to insufficient space to properly integrate it into our installation. Therefore, it has not been used in production. Technical specifications: Compatible with the LUTETIA mixer range Lifting capacity: 250 kg with a standard European-type container Tilting of a 200-liter container using 2 cylinders Pneumatic operation – 6 bar Adjustable tilting chute: 950 to 1,200 mm Loader mounted on 2 casters Overall height with container raised: 2,700 mm Overall dimensions: 1,900 × 1,100 × 1,900 mm Weight: approximately 300 kg All-stainless steel construction Sound level: less than 70 dBA Equipment available immediately. Original documentation available. Price: €6,000 excluding VAT, negotiable. Available for viewing by appointment. Photos and additional information available upon request.

Condition: good (used), functionality: not functional, space requirement length: 8,000 mm, space requirement width: 4,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 2,000 mm, total width: 2,100 mm, total length: 5,000 mm, type of input current: three-phase, input voltage: 400 V, power: 22 kW (29.91 HP), shaft diameter: 127 mm, DRAIS" TYPE S8000 double ribbon mixer - Tank capacity approx. 8000 L. Tank: stainless steel construction L x W x H = 3350 x 1800 x 1800 mm Machine sold without motorization but with partial coupling to keep or change Recommended gear motor not supplied 3 x 400 V- 22 KW - 10 rpm - Torque 60940 Nm Isdpeu D Ihvsfx Amljif Central drain at 500 mm Sealing by stuffing box Shaft diameter 150 mm Stainless steel cover Product feed via trapdoor 500 x 300 mm - 4 nozzles diameter 80 mm + 1 nozzles diameter 100 mm and two 150 mm diameter lights Overall dimensions L x W x H = 5000 x 2100 x 2000 mm approx.

Condition: like new (used), Generally overhauled machine Price: 4.500EUR Dough mixer With paddle Kemper Ijdpsx N Efqofx Amleif The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Condition: used, Year of construction: 1987, Twin saw Manufacturer: Hüllhorst Type: DH5 4SR Year of manufacture: 1987 Technical data Iiedpfezuynnjx Amlsf Working width: 2500 mm Length of support arms: 3350 mm with 2 x scoring saws and 2 x main saws Note: The technical data and descriptions are a copy of the original order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm Iodpfx Amev Sm Nqeloif max. grinding length: 2950 mm min./max. diameter of the grinding wheel: 40 / 250 mm main drive power: 8.5 kW With accessories. Movie with machine underpower available

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Isdsznwwaopfx Amloif Type: 2005/100 Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request. Iiedpfsy Swi Hsx Amlsf

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 4508-6389, On layout machine no10 Finger depositor not included (planned to stay) Iiedjxl S Unjpfx Amlsf Included 2 planetary mixer MR150 and 3 mixer bowl lift. Production layer cakes size 350x450x50mm . Cake Cakes are aluminium trays. Biscuit layes placed manualy. Productivity depends on the type of cream and the number of layers (max 3 layers). 100...300cakes/h. When you dosing just liguid dough - one layer (pound cake dough) you can reach to 600tray/hour. NB! Removal and transport are not included in the price. Separate agreement.

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V Iodpfx Amszt Hmzoloif • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: primarily for processing: • plastic waste, • wood, • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h Iedpfjydv I Dex Amlsif • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 RG2 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % ED) Main spindle torque: 180 / 140 Nm Tailstock: Yes, same power X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Isdpfx Aszl Dvkjmlsif Machine weight: approx. 5,300 kg Connection power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor Bürener type SPE 63/30-250 Z60 Tool monitoring system from Artis, type CTM Tailstock mounted on the counter-spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center: MK3 Overload coupling for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece removal device Workpieces can be automatically unloaded from both the main and counter-spindle Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine from IRCO, type SiMag 42