Used Ayel-Tech 250 X 8 for sale (84,158)

Condition: excellent (used), We offer here II. Choice truss brace of the manufacturer SSI Schäfer for sale. Technical data of the truss brace: Shelving system: SSI Schaefer Type: PR 600 Included in delivery: 01x truss brace, II. choice Material color: sendzimir galvanized total length: approx. 1.249,2 mm center-center-hole: approx. 1.209,2 mm profile dimension: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm Blsdpfsh Eg Akex Akasg General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, Ostas 4-Roller Plate Rolling Machine 4R OHS 2570 x 250 Hydraulic Side Roll Adjustment 3 Digital Readouts Hydraulic Drop-End Hardened Rolls Conical Bending Device Separate Control Panel Roll Length: 2570 mm Top Roll Diameter: 250 mm Side Roll Diameter: 200 mm Total Motor Power: 7.5+1.5 kW Weight: 6300 kg Dimensions (mm): 4550 x 1550 x 1470 (L x W x H) Bedpoxrdcdjfx Akajlg Bending Performance Data 10 mm at minimum inner diameter (5 x top roll) 8 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance Data 8 mm at minimum inner diameter (5 x top roll) 6 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm² yield strength Material: ST 37 – ST 42 structural steel The images shown are for illustration purposes only.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 250 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Cone bending device Separate control panel Roll length: 3070 mm Top roll diameter: 250 mm Side roll diameter: 200 mm Total motor power: 7.5 + 1.5 kW Weight: 9800 kg Dimensions (mm): 5050 x 1550 x 1470 (L x W x H) Bending performance data 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) Pre-bending performance data 7 mm at minimum inner diameter (5 x top roll) 5 mm at minimum inner diameter (1.5 x top roll) Bedoyaqmajpfx Akaolg All bending capacities are based on a yield strength of 250 N/mm2 Material: (ST 37 – ST 42 structural steel)

Condition: used, mileage: 40,000 km, power: 735.5 kW (1,000.00 HP), first registration: 11/2006, fuel type: diesel, overall weight: 44,000 kg, axle configuration: 8x8, color: red, Year of construction: 2006, Equipment: additional headlights, airbag, all wheel drive, parking heater, Airfield fire fighting vehicle, MAN chassis with Z 8 superstructure - ZIEGLER company Ready for operation Bedpjw Hk U Ssfx Akaelg

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-1, Filter plate specification 250X250mm Filtering area 0.56m2 Number of filter plate 8pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Blsdpfjb Dluwjx Akasg Filtering chamber volume 7L Filtrate discharge Open type outlet Construction material for framework Main material for framework is carbon steel. Contact parts in PVC or SS. Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 960X400X350mm Weight 350KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles Bledpfx Akjhqnl Toasg composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Blodpjd Ab Uuefx Akaog Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: used, Container 13 m³ – 4.5 m x 2 m x 1.92 m – (8 units in stock) = Additional information = Suitable material: Waste VAT/margin scheme: VAT deductible Contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Bledpfx Akoxn Swzeaog

Condition: new, 6,5 mm ST 40 3,5 mm VA 90° Grad blade length 250 x 250 mm table: 810 x 750 mm work height max. 950 mm engine output 4,0 weight 630 kg range L-W-H 810 x 750 x 1150 mm Characteristics : Bljdpfx Akjxcux Djaog - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: new, weight max. in kg 250 kg Bljdpfxoxak D Rj Akasg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Bledpfx Aod Iclrskaeg Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, stroke length: 250 mm, operating speed: 100 mm/s, reverse speed: 90 mm/s, table height: 900 mm, throat depth: 400 mm, total length: 4,550 mm, total width: 2,350 mm, total height: 2,950 mm, overall weight: 15,000 kg, controller manufacturer: CYBELEC, controller model: MODEVA 10S, working width: 3,100 mm, bending force (max.): 250 t, distance between stands: 2,550 mm, installation height: 517 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 6, type of crowning: CNC-controlled, Technical data NEW INTERMEDIARIES/PUNCHES/DIES. Protective laser Crowning table with CNC CNC CYBELEC MODEVA 10S Bljdpfx Aeymyffjkaeg CNC axes: Y1/Y2/X/R Manual axes: Z1/Z2 Year: 2009 FREESTANDING MACHINE

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Solar fasteners: 1375 fully assembled threaded rods -Type: M10 x 250 SW 7 -Material: Stainless steel A2 Blsdpfsq Nqxaox Akasg -Price/Sale: complete -Transport dimensions: 1200/800/H300 mm -Weight: 235 kg

Condition: excellent (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 800 x 8 mm -Inside: Ø: 80 mm Blodpsvy Umtsfx Akaog -Hole circle: Ø 120 x 22 mm / Ø 160 x 26 mm -Number of teeth: 118 teeth -Weight: 20 kg

Condition: good (used), Grinding drum, deflection drum, belt grinder, belt sander, drum grinder, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 150 mm -Drum: Ø 250 mm -Hole: Ø 40 mm Bljdpfx Asvxgwuskaog -Quantity: 1x drum available -Dimensions: Ø 250 x 150 mm -Weight: 15.4 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h Bsdpst Rbhzsfx Akajlg -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: used, turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, change holder, turning tool holder, clamp holder, turning tool holder -Turning tool: turning tool holder tool holder -Dimensions: see photos / technical drawing -Number: 4x turning tool holders available -Price: per piece -Dimensions: Ø 30 x 250 mm -Weight: 1.1 kg Bjdpju Npftefx Akaslg

Condition: good (used), Grinding drum, deflection drum, belt grinder, belt sander, drum grinder, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 150 mm -Drum: Ø 250 mm Blsdpfxovxguas Akaog -Hole: Ø 45 mm -Number: 7x drums available -Price: per piece -Dimensions: Ø 250 x 150 mm -Weight: 15.8 kg/piece

Condition: good (used), Steel pipes, flushing pipes -Diameter: 508 mm -Wall thickness: 8.8 mm -Length: 4,400 mm -Weight: 108 kg/m Bodpfx Akerpqlioaelg

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fasteners: Hanger screws fully assembled 900 pieces -Type: M10 x 300 240 pieces with adapter plate Bodpfx Aeq Sbgdokaolg -Type: M10 x 250 440 pieces with adapter plate -Type: M10 x 200 420 pieces without adapter plate -Material: A2 stainless steel Quantity: Total 900 pieces -Price/tax: complete -Transport dimensions: 980/670/H550 mm -Weight: 246kg

Condition: good (used), Stick electrodes 2.5 x 250 Bedpfod Emhljx Akaelg -Type: FOX CM 2 Kb -Price: per package -Number: 8 packages available -Weight per package: 3.3 kg

Condition: used, Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, ventilation grilles, compact grilles, circulating air intake grilles -Manufacturer: Schako, compact grille ventilation grille ovp -Type: KG-R-8 515x65mm Bledjikbrijpfx Akaog -Material: steel, galvanized -Total dimensions: 560/100/H60 mm -Weight: 1.8 kg

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Bljdpfxjhb N Alo Akajg -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 40 mm -Transport width: 250 mm -Receiver: single-sided, ball-bearing mounted (see photos) Bljdpoxyf N Isfx Akasg -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 3.2 kg/pc.

Condition: excellent (used), Transport scooters, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailer tires, stroller wheels -Tyres: outside Ø 250 mm - Tread: plastic (hollow) -Rim: Inner Ø 13 mm - Quantity: 162 pieces Bledpfx Akev Tm Tleaog -Price per piece - Minimum purchase: 4 pieces -Dimension: Ø 250 x 75 mm -Weight: 0.8kg/pcs