Used Atom Spa Mf 9.3 for sale (2,938)

Year of construction: 2025, condition: new, functionality: fully functional, Available models on GAS and Electrical power supply with different dimensions and capacities Iedpfx Aswhdhusmisib Perfect for artisanal bakeries, semi-industrial plants and retail stores The ideal solution for anyone looking for superior baking performance and maximum flexibility when working with different types of bread and pastries, regardless of shape, size or quantity. It burns perfectly at both full and partial loads. Innovative baking systems for perfect results BTT (Bottom to Top) baking system – air circulates from the bottom up, creating a floor oven effect for a unique baking quality. The result: a product that leaves customers breathless! DAF (Double Air Flow) – extremely even baking thanks to the double airflow that encompasses each product. Not available on model 4676. Ideal for: Cakes and pastries of low weight (e.g. 60–70 g Kaiser pastries, biscuits, sticks, tarals...) Fast baking cycles (less than 15 minutes) High racking (more than 18 levels) Narrow and long trays (e.g. 46×80 cm) OPT function – allows you to monitor the efficiency of the furnace operation in real time, helping in more rational use and energy savings Technical characteristics: Baking surface: 6.3 m2 (n°18T 46x76) Oven dimensions WxDxH: 123x171x251 Minimum room height: 270 cm Power GAS: 52 kw 44000 kcal/h Electrical power: 1.5 kW Weight: 1350 kg Max. Baking temperature: 300 °C Heating: electric or gas/light fuel oil Main switch located on the control panel Advanced control and management TOUCH electronic control "Ready to Bake" – the stove is always ready with lower consumption "Recovery Time" – the exact time to re-readiness Partial Load Management Password protection of recipes USB 2.0 for fast and secure data transfer. Effective steam management Speed Dry – faster steam ejection (70% faster), for crispier and more fragrant products Increased steam generator (standard equipment) – higher volume and better steam distribution Automatic steam damper Stainless steel exhaust – 900 rpm Energy efficiency and durability High-performance heat exchanger and firebox (in combustible versions) Double armored heaters (electric version) Two-layer high-density mineral wool insulation Rubber-silicone seal + stainless steel – long life and no steam leakage Thermo-reflective glass – saves energy Ergonomic vertical handle along the entire height of the door, with double locking system Raised stove bottom – additional thermal insulation Connection to a power limiter (only on electric models) Construction and ergonomics: Stainless steel front and hood Stainless steel floor with adjustable flaps for air regulation Rotary trolley unit with motor and mechanical overload protection Manual lifting mechanism Trolley access door 194.5 cm high (model 4676 off) Door with hinges on the right side Stainless steel access ramp, gentle inclination for easy insertion/removal of the trolley Flat inner surface – easy to clean Prepainted steel side panels Access to the main controls from the front Heavy Duty version (HD kit) – available for models 80100 and 80120 For intensive work over 8 hours a day and average temperatures above 250 °C – additional reinforcements for maximum durability.

Year of construction: 2025, condition: new, functionality: fully functional, Available in different sizes and capacities. Domino is a professional floor stove designed to meet the needs of simple and versatile use. It is ideal for baking bread, desserts and pizzas in the tray. The Domino series is especially suitable for bakeries, pastry shops, pizzerias and hotels. Basic characteristics: Baking temperature up to 350°C Height of the working floor: 18 cm (optional: 25 cm) 3 power levels available: STANDARD, MAXIMUM and TRAY PIZZA (on some models at an additional cost) New design suitable for blending into the interior Number of stackable floors: from 1 to 4 Fydrofire® Fireclay Plates Fydrofire® floor slabs provide greater reliability and even heat distribution Standard on all models. Control Panel & Software TOUCH electronic control "READY TO BAKE" function – the stove is ready for the set temperature with lower energy consumption "RECOVERY TIME" function – you always know how much time is left until the furnace is ready Access password management – guarantees consistency in baking by restricting access to recipes USB 2.0 port for fast and secure data transfer Energy Efficiency POWER MANAGEMENT: energy-saving mode for floors and steam generators, with 3 different modes according to the type of baking OPT display – shows the efficiency of the furnace use, enables conscious use and savings SLEEP function – to save during periods of inactivity Temperature control using two probes per floor Minimum insulation thickness: 100 mm Glass that reflects heat Steam generator (optional) with optimized performance and tuning from the panel Steam generator on/off button Automatic switching on and off by days and weeks Automatic shutdown in case of prolonged inactivity Display of time for conscious use of the stove Ready to connect to a power limiter device Construction Stainless steel front and hood Side panels made of prepainted sheet metal From the Squirrels, Squirrels, Squirrels Independent heater at each end of the floor Concrete and fireclay baking plate Lightweight aluminum frame for easy transport and installation Automatic control of the steam ejection damper Doors with upward opening – saves space Double Spring Doors Easy and quick cleaning of the glass without removing it Large stainless steel handle, insulated plastic handles for safe and ergonomic handling The internal dimensions of the floor correspond to the actual width of the opening Double lights per floor, with on/off switch Control panel on the right. Technical characteristics: Floor: 3 Floor entrance height: 18 cm Number of trays 60x40: 6 pieces per floor Floor dimensions width x depth: 124 x 122 cm Oven dimensions WxDxH: 163 x 161 x 241 cm Power: 13.6 kW per floor Iisdpjwhdpxjfx Amisb Weight: 185 kg one floor

Condition: ready for operation (used), Year of construction: 1985, LATHE SPA 710x10000 Chuck diameter: 710 mm Iodpfjwywlkjx Amisib Max turning over cross slide: 480 mm Distance between centers: 10,000 mm Spindle bore: 105 mm Main motor: 10 kW Weight approx.: 12 t Video of the machine under power available!

Condition: used, Year of construction: 2013, Overview  This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data Capacity: Approx. 80 hL/h Filtration system: Diatomaceous earth Tank: Pressurized stainless steel Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump Valve system: Stainless steel, precise flow control Design: Mobile filtration unit with integrated control system Iodpfexfcc Aox Amieib

Condition: ready for operation (used), Spako vessel with electric elements Isdoy N Sulepfx Amioib Elements under bottom skin With scrape mix action, top driven Tap emptying Capacity 100 litres With process control

Condition: used, total width: 1,400 mm, total length: 1,550 mm, total height: 2,510 mm, - Documentation available: No - CE certificate present: No - Serial number: 400201 - Main motor power [kW]: 18.8 - Flow capacity [m³/h]: 12500 - Negative pressure [Pa]: 3015 - Connection diameter [mm]: 460 Ijdpfx Asxwu Nxomijib - Output diameter [mm]: 435 - Power [kW]: 18.8 - Transport dimensions: 1550mm x 1400mm x 2510mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, total width: 1,130 mm, total length: 1,200 mm, total height: 1,650 mm, Empty weight: 272 kg - Year: 2007 - Documentation available: No - CE certificate present: No - Serial number: 400492 - Main motor power [kW]: 18.5 - Flow capacity [m³/h]: 10100 - Negative pressure [Pa]: 3110 - Connection diameter [mm]: 420 - Output diameter [mm]: 380 - Transport dimensions: 1200mm x 1130mm x 1650mm (l x w x h) Isdpfx Amjxr Nrdoijib - Transport weight [kg]: 272kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1997, CN NAKAMURA-TOME Turning Center SC-450 CNC: FANUC SERIES 21-T Year: 1997 Isdpfx Aey S Smtomioib Power: 45 kW with chip conveyor 5 tool holders GOUBARD tilting and forklift-compatible chip bin 1 inspection point

Condition: used, capacity 1.000L. all stainless steel double jacket 36 kW tiltable drum stirring system with scrapers Iiedey Nawhjpfx Amiob electric heating dimensions (l x w x h) : ± 1.900 x 1.900 x 1.800 mm

Condition: excellent (used), Year of construction: 2016, AMF Spanntechnik - K20 - 554755 Zero Point clamping modules (6 x) 2 x AMF PowerTube 46 with 60 Bar to ope/clamp 4 x AMF K20 model with diameter 110 mm 2 x AMF package hose / tube / cables Zero point clamping system improving set up time optimized clamping during cutting and non cutting machining. Pull-in locking force 17 kN Holding force 55 kN Length:170mm Width:170mm Height:60mm Iodpfx Amsx Tr Rnsisib Weight:2kg

Condition: excellent (used), Year of construction: 2016, Magnetic clamping plate 500 x 225 mm incl. AMF BUR-10 switch box incl. AMF remote control New over EUR 6000 Table Length: 500mm Table Width: 335mm Iiodpfx Ajx Tr T Nemiob Table Height: 75mm Number of poles:1 Length: 600mm Width: 340mm Height: 230mm Weight: 60kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, automatic strapping machine Transpak TP 702, year 2018, 12 mm strap, arch 850 x 600 mm, capacity 50 to 55 cycles per minute, automatic strap feeding and ejection, tension adjustable via potentiometer. Iisdpfxeytr Nco Amisb

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Iiodpfx Ajwkfwpemieb

Condition: used, Year of construction: 2014, Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Spadoni | 1.5hl with Tangential Entries Mixing Tanks | 1.5hl with Tangential Entries 2x Isobaric Fermenters | Spadoni | 2.5 bar 15hl 2x Isobaric Fermenters | Spadoni | 2.5 bar 30hl 2x Atmospheric Fermenters 1bar Pressure 1.2hl | BREW TECH Atmospheric Fermenters 1bar Pressure 1.2hl, (Jacketed) | BREW TECH Iiedpfxjtka Aqj Amijb

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, Automatic strapping machine Transpak TP 702, stainless steel, 8 mm strap, arch 650 x 500 mm, 50 cycles per minute, automatic strap loading and ejection, tension adjustable via potentiometer, activation by pedal or button. Iijdpfx Aey Ncwdjmiob

Condition: used, total width: 950 mm, total length: 2,330 mm, total height: 1,560 mm, Empty weight: 350 kg - Documentation available: No - CE certificate present: No - Serial number: 63020 - Main motor power [kW]: 30 - Flow capacity [m³/h]: 18600 - Negative pressure [Pa]: 2635 - Connection diameter [mm]: 630 - Output diameter [mm]: 560 - Transport dimensions: 2330mm x 950mm x 1560mm (l x w x h) Iodpfx Asxwu Etsmieib - Transport weight [kg]: 350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, total width: 1,100 mm, total length: 1,350 mm, total height: 2,530 mm, Empty weight: 290 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Serial number: 450129 - Main motor power [kW]: 22 - Flow capacity [m³/h]: 13500 - Negative pressure [Pa]: 4100 - Connection diameter [mm]: 450 - Output diameter [mm]: 440 - Transport dimensions: 1350mm x 1100mm x 2530mm (l x w x h) - Transport weight [kg]: 290kg - Transport packages [pcs.]: 1 Isdpfjx Ad E Hsx Amisib Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Iedpfxewm Rqte Amieib Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: used, NAKAMURA-TOME NTRX 300 is a machining and turning center from bar, engineered for precision, high accuracy and reliable production. Main capacities: 6 axes (5 simultaneous), Z travel 1125 mm, X 700 mm, Y ±125 mm, B tilt 225°, C 360° resolution 0.001; workpieces up to 1100 mm length and Ø 640 mm; tool magazine 40 stations, tool Ø max 90 mm, tool length 300 mm. Technical specs: spindle nose Capto C6, main spindle up to 4500 rpm, milling spindle up to 8000 rpm, spindle motor 15/11 kW, rapid traverse 36 m/min, air 5–7 bar, 3x400 V 50 Hz, total power 65.1 kVA, weight ~18000 kg, footprint 4530×2670×2615 mm. Accessories: coolant system, paper filtration, toolholder set, milling cutters, drills, lamp, oil‑mist extractor, bar loader. Achieves tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Iiodpjy S A Rpjfx Amiob

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Iodpoy Snkujfx Amisib Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Technical Specifications Iedjydqahopfx Amieib 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: used, all stainless steel suitable for eurobins of 200L suitable for tumbling and mixing dimensions (l x w x h) : ± 3.000 x 1.900 x 1.750 mm Isdpfjy Emtbex Amioib

Condition: used, Dust suction hood 320 mm Air consumption 6.400 m³/h Motor output 15 kW Iodpfxjyqz Uvj Amisib Spänex SP 315 KC 3.1 radial fan for efficient extraction of chips, dust, and light wood waste in woodworking shops. The fan is ideal for use in extraction systems on individual machines or smaller machine parks and ensures reliable air transport in continuous operation. Its robust industrial design makes it suitable for continuous use in workshops and production facilities.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools Isdsy N Spcepfx Amisib • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Condition: Currently stopped/not in production; reported functional; available for inspection by appointment • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Hispano Suiza Geneve milling machine offered. X-travel: 410 mm Y-travel: 200 mm Iisdpfx Ajf Srhgemijb Z-travel: 400 mm Speed: 67- 3000 RPM Spindle: ISO 40 Bed: 430x225 mm Head adjustable Dimensions: 130x130x140 cm LxWxH For more information call us or send an e-mail.