Used Artiglio Eagle 1100 for sale (2,594)

Condition: excellent (used), Year of construction: 2023, Offer for Technofold 1100 SL with Gyro Specification: Machine speed: 350 m/min Step speed: 20 m/min Packaging width: 160-1100 mm Ijdpfx Aew Ec D Asa Ieau Machine dimensions: 22 × 1.88 × 1.5 m Machine weight: 9.2 t Max power consumption: 26 kW Air demand: 6 bar / max 10 m³/h Machine equipment: 4-6 point machine Gyro – rotating packages by 90° Side alignment section – left/right Pre-breaking section Automatic bottom section Servomotors, 4/6-point rear folding system Lower circular gluer left/right KQ cold glue system with 4 guns Final pressing and closing section Delivery section Ironing section with independent drive Pneumatic insertion rollers with SQUARING 2 alignment Tapping block – SPANKER Vacuum on the feeder + vibrator Camera with monitor on display

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Iaedpen Argiofx Aa Iou Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: ready for operation (used), Year of construction: 2020, total height: 1,700 mm, overall weight: 1,950 kg, product length (max.): 1,700 mm, General Data Machine weight 1950 kg Measurements height 1700 mm Dimensions Iaedex D Iprepfx Aa Isu Machine Length 1700 mm This Wood Band Saw was manufactured in 2020. It features a maximum log diameter of 1100 mm and a cutting length up to 10 meters. The main drive is robust at 15 kW, ensuring efficient operation. It includes a double edger, wood excavator, and various operational enhancements such as an electrically adjustable saw head and multiple feed speeds. Ideal for comprehensive woodworking tasks. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: new, Year of construction: 2024, Kyori High Speed Press VX50-1100 with variable stroke adjustment Technical specification: tonnage: 500 KN drive: flywheel with dynamic balancer feeding direction: right to left colour: Kyori white RAL 7035 position of main drive: right ram adjustment range: 55 mm shut height max.: 290 mm max. upper die weight: 300 kg (higher upper die weight is possible with reduced performance) safety doors: front and back tool load area light: 2 LED lights Bolster area (LxW): 1100 (1140) x 600 mm Bolster design: T-slot Bolster material: steel Bolster thickness: 220 mm base plate opening (LxW): 00 x 160 mm ram area (LxW): 1100 x 420 mm Iedetndfropfx Aa Ijau ram design: T slot dimensions: 2300 x 1600 mm total height: 3750 mm weight: (approx.) 14,000 kg strip inlet height: has to be defined strip inlet width: max. 280 mm cooling system: liquid cooling system, for electrical cabinet;AC servo main drive and machine oil Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Iaedpfx Aoyi Uaija Iju Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Condition: ready for operation (used), functionality: fully functional, Universal milling machine WAGNER FCU-1100 is a milling machine, characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metallic working table with T-slots for fixing the parts and other visible mechanical components. Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: HURON type head lighting lubrication pump feeds on 3 axes Iasdperidyrefx Aa Iou visualization on 3-axes vise anti-vibrations

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,938 h, load capacity: 8,000 kg, lifting height: 5,700 mm, free lift: 1,755 mm, fuel type: diesel, mast type: triplex, construction height: 3,160 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Side shift, Iajdpfxjyauvle Aa Isu 3rd valve, 4th valve, heating, full cabin,

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 6,806 h, load capacity: 8,000 kg, lifting height: 8,905 mm, free lift: 2,905 mm, fuel type: diesel, mast type: triplex, construction height: 4,360 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Iajdpjxz Ifuofx Aa Iou 3rd valve, 4th valve, heating, full cab,

Condition: used, machine/vehicle number: 1100 X 20, first registration: 11/1990, color: other, Year of construction: 1990, OLD USED TRAILER 10 HOLE RIMS. Isdpfx Ajxwkqrea Ijau

Condition: used, Year of construction: 2017, operating hours: 60,300 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,100 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table width: 560 mm, table length: 1,400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 5,830 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 32,000 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DMG MORI CMX 1100 V / 2017 / HEIDENHAIN TNC 620 / spindle replaced by DMG For sale: a used DMG MORI CMX 1100 V vertical machining center, manufactured in 2017. Iodpfsy I A Duox Aa Ijau The machine is located at our facility in Bydgoszcz, Poland. The planned production run on this machine has just been completed, and the machine is ready for sale. The machine is still connected to power, so it is possible to start it up, inspect it, and view it on-site after arranging an appointment in advance. The main spindle was replaced by DMG service in November 2024. Since the replacement, the spindle has operated for approximately 3,700 hours. A DMG service report confirming the spindle replacement is available. Key specifications: Manufacturer: DMG MORI Model: CMX 1100 V Year of manufacture: 2017 Control: HEIDENHAIN TNC 620 3D Travel in X/Y/Z: 1100 / 560 / 510 mm Table: 1400 × 560 mm Spindle speed: 20–12,000 rpm Spindle taper: SK40 DIN 69871 Tool magazine: 30 positions Linear scales in X/Y/Z axes Wireless HEIDENHAIN measuring probe Chip conveyor Electronic handwheel Coolant tank: 250 l Machine weight: approx. 5830 kg Operating hours: Approximately 3,700 hours since spindle replacement Spindle hours according to the counter: approx. 33,000 hours Machine on-time hours: approx. 61,800 hours Current meter readings are available in the documentation dated May 12, 2026.

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis Isdpfx Aeyriu Hea Ijau 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Iedpjuddimofx Aa Ijau Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Iodpfexgic Esx Aa Ioau Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: used, Year of construction: 2015, x-travel 1300 mm y-travel 610 mm z-travel 650 mm control Siemens type 828 D Shop Mill Tool changer 24 Fach spindle taper: ISO 40 SK spindle turning speed range 8500 U/min table surface area 1300x610 mm Iodpfx Aajyqtbzs Ijau Table load 1000 kg spindle power 15 kW total power requirement . KVA weight of the machine ca. 8 t Operating hours: 5000 Equipment: Internal coolant system, chip conveyor on the left, cleaning gun, signal light The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), power: 6 kW (8.16 HP), Year of construction: 2003, Year of manufacture: 2003 Technical condition: very good Visual appearance: very good Iaedju Hlgbepfx Aa Isu Damages: none Please contact Ferdinand Pater for more information

Condition: used, Transformer, transformer, converter, three-phase autotransformer -the transformers come from a UV paint drying facility -Input: 400 V -Output: -(technical data see photos) -Number: 8x transformer available -Price: per piece Iodpfx Aecft T Aja Isau -Dimensions: 160/180/H195 mm -Weight: 14 kg/piece

Condition: good (used), T-slot plate, clamping plate with T slots, plate field, welding table, welding table Iajdpfx Aaob Npx No Iju -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg

Condition: good (used), Transformer, converter, inverter, three-phase autotransformer -The transformers come from a UV paint drying process. -Input: 400 V -Exit: -Technical data: see photos -Number: 14x transformer available Ijdpfx Aaocft T Dj Ieau -Price: per piece -Dimensions: 310/200/H415 mm -Weight: 60 kg/piece

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate -Belt width: 600 mm, up to 800 mm possible -Conveyor length: approx. 13400 mm -Set-up dimension: 13495/940//H340 mm -Transport dimension: 4150/940/H670 mm -Total weight: 422 kg Iedoihc U Nopfx Aa Isau

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 Isdjihi T Topfx Aa Ioau -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Belt width: 600 mm -Conveyor length: approx. 6000 mm -Installation dimensions: 6000/940/H340 mm -Transport dimensions: 4200/940/H490 mm -Total weight: 269 kg

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor Iasdpfeihi Ubsx Aa Ieu -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Belt width: 600 mm -Conveyor length: approx. 6000 mm -Installation dimensions: 6010/950/H340 mm -Transport dimensions: 4140/950/H430 mm Total weight: 300 kg

Condition: good (used), Tool trolleys, workshop trolleys, mobile workshop trolleys, transport trolleys, table trolleys, assembly trolleys -Workshop trolley: transport trolley, assembly trolley, foldable Isdpfx Asqzl H Aoa Ijau -Length: 1600mm -Width: 1100mm -Height: 1020mm -Swivel castors: 4 pieces with brakes -Weight: 103 kg

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction Ijdpfx Aaeqwprgo Ijau -Type: "Fumatech" MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency controlled, up to 58.7 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate Ijdoihc U Eopfx Aa Ioau -Brake: 10 Nm -Belt width: 600 mm -Conveyor length: approx. 7700 mm / approx. 800 mm height adjustable -Set-up dimensions: 7720/860/H340 mm -Transport dimension: 3940/860/H490 mm -Total weight: 392 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Isdsn H Eucspfx Aa Ijau -Manufacturer: Tramag Fürth, transformer type CST from injection molding machine Demag D 100-275 NC -A-No.: 80258 . 06520365 -Power: 1100 VA -Technical data: see photo nameplate -Dimensions: 240/120/H220 mm -Weight: 16 kg