Used 20-W-1500-4 for sale (89,103)

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Almost new municipal winter service truck Mercedes-Benz Arocs 2235 4x4 all-wheel tipper with 22 t gross vehicle weight, Meiller three-way tipper and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera, and much more. German one-owner vehicle with only 20,553 km (odometer), new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload with 18,000 kg gross weight: 7,672 kg Payload with 22,000 kg gross weight (winter service): 11,672 kg Weight variant 20.5 t (9.0/13.0) Permitted gross weight during winter service: 22,000 kg Winter service front axle load increased: 10.5 t Front axle: 9.0 t straight, Rear axle: bevel gear 300, planetary design, 13.4 t Front leaf spring: 10.5 t, 3-leaf; Rear leaf spring: 13.0 t Winter service hydraulics by Meiller for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-driver’s cab ClassicSpace with rear window Additional heat insulation Engine: OM936, R6, 7.7 l, 260 kW (354 HP), 1400 Nm, Euro 6 E Drive: 4x4 Differential lock front and rear axle Axle ratio i = 4.143 Meiller 3-way tipper, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side walls: 600 mm high Removable aluminium side wall extensions +400 mm Lashing pockets in tipper body floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04 selectable PTO via engine power take-off Automatic climate control Auxiliary heater – hot water additional heating Tow hitch Maul Ringfeder D40 with air brake connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross train weight: 40,000 kg Front and rear leaf suspension Front and rear axle stabilisers Electric braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290 litre tank LED daytime running lights LED rear lights Fog lights 2 rotating beacons to the rear, above the cab roof Rear work lights Exhaust raised behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver’s air-suspended seat Central locking with remote control Last Mercedes-Benz service performed in 10/2025 Ledpfx Asxlwnaed Aork German one-owner vehicle Meticulously maintained and as-new condition Price NET plus 19% VAT. Attractive financing options available upon request. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2577

Condition: new, sheet length: 4.000sheet thickness: 20,0cutting area width: 4000total power requirements: 22weight approx.: 20000messurements (LxWxH): 4850 x 2300 x 2180 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Ledpfxjxxd D Us Ad Aerk Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, Laser performance: 4Working Area: 1500 x 3000Loading Capacity: 1200x-travel: 1520y-travel: 3030precision of position: 0,05repeat accuracy: 0,03messurements (LxWxH): 10000 x 400 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  Lrsdpferuwazex Ad Ajk - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area1500 x 3000 mmLoading Capacity1200 kgX-Y Axis Travel1520 x 3030 mmZ Axis Travel300 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight12000 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 4Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  Ljderuwbijpfx Ad Aerk - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 4working width: 1500precision +/-: 0,05load-up weight (max.): 1.250messurements (LxWxH): 11200 x 3500 x 2560weight approx.: 10000at aluminium max. approx.: 6at stainless steel max. approx.: 8at carbon steel max. approx.: 20FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Lrsdpfxsrtfx Se Ad Aok Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 4precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Lrjdpferuwccox Ad Aek Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: used, mileage: 314,320 km, power: 265 kW (360.30 HP), first registration: 08/2007, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro4, Equipment: air conditioning, Tel.: call (Contact · Phone · Mobile · WhatsApp) * Man TGS 26.360 6x2 / 4 BL * Refuse truck * 3-axle * Automatic transmission * With tipping system * Water tank * Front leaf suspension Lredpfx Ajm Anpaod Ajk * Rear air suspension * Lift and tag axle * VIN: WMAH74ZZ57L048788 * Engine Type: D2066L033 * kW: 265 * Euro 4 * Displacement: 10,518 ccm * Curb weight: 17,100 kg * Gross weight: 26,000 kg * Payload: 8,825 kg * Wheelbase: 3,600 / 1,350 mm * Vehicle length: 9,100 mm * Vehicle width: 2,550 mm * Vehicle height: 3,800 mm * Net price * All details without guarantee

Condition: used, mileage: 233,206 km, power: 259 kW (352.14 HP), first registration: 07/2003, fuel type: diesel, overall weight: 17,990 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: air conditioning, all wheel drive, crane, Tel.: call (Contact · Phone · Mobile · WhatsApp) * Iveco Euro Trakker 190 E 35 W 4x4 all-wheel drive * Front crane with Meiller tipper * Manual transmission * Full leaf spring suspension * Air conditioning Lrsdpfx Aor Ex A Sod Ask * VIN: WJMB1VPS10C119715 * Engine type: F2BE0681A * kW: 259 * Euro 3 * Displacement: 7790 cc * Unladen weight: 12,500 kg * Gross vehicle weight: 17,990 kg * Payload: 5,415 kg * Wheelbase: 4,200 mm * Vehicle length: 7,500 mm * Vehicle width: 2,550 mm * Vehicle height: 3,700 mm * Tires: 315 / 80 R 22.5---- * Front crane * Hiab 122 E S - 3 PRO * Radio remote control * 4 hydraulic extensions---- * Net price * All information without guarantee

Condition: used, mileage: 446,713 km, power: 265 kW (360.30 HP), first registration: 12/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, all wheel drive, Tel.: call (Contact · Phone · Mobile · WhatsApp) * MAN TGS 28.360 6x2-4 BL All-wheel Drive * Garbage truck * Vehicle data: * Body type: Garbage truck * Drive: All-wheel drive (6x2-4) * Lift: available * Trailing axle: steerable * Transmission: manual gearbox * Retarder Lredpfx Aexrx Afsd Aok * Technical data: * VIN: WMA84SZZ89L055492 * Engine type: D2066LF36 * Displacement: 10,518 cm³ * Power: 265 kW (360 hp) * Emission standard: Euro 4 * Technically permissible gross weight: 28,000 kg * Permissible gross weight: 26,000 kg * Unladen weight: 9,720 kg * Axle loads: * Front axle: 8,000 kg * Drive axle: 11,000 kg * Trailing axle: 8,000 kg * Tire size: * 315/80 R22.5 156/150K – 22.5×9.00 * 3rd axle: 385/65 R22.5 160K – 22.5×9.00 * Year of manufacture: 17.12.2008 * Price on request * All information without guarantee

Condition: excellent (used), Year of construction: 2004, operating hours: 3,170 h, load capacity: 2,000 kg, lifting height: 3,800 mm, mast type: triplex, For sale professionally refurbished Mast Explorer 20 / H20DL 4WD rough terrain forklift, suitable for operation in demanding conditions – construction sites, unpaved terrain, outdoor warehouses. Technical data: -Manufacturer: Mast -Model: Explorer 20 / H20DL 4WD -Year of manufacture: 2004 -Operating hours: 3,170 h -Tires condition: almost new tires -Drive: Diesel, 4×4 (four-wheel drive) -Engine: Perkins -Engine power: approx. 35.5 HP / 26.5 kW -Transmission: hydrostatic -Rated capacity: approx. 2,000 kg (load center 500 mm) -Side shift -Controls: multifunction joystick Lredox Ni Trjpfx Ad Aok Mast and forks: -Mast type: Triplex with free lift -Maximum lifting height: 380 cm -Fork length: 110 cm -Maximum fork spread: 130 cm -Inside fork width: 105 cm Forklift ready for work. TAG: AUSA, MANITOU, JCB, MERLO, CAT, JLG, HAULOTTE, GENIE, TEREX, BOBCAT, GEHL

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 61033935, clamping force: 4,500 kN, Equipment: documentation/manual, Krauss Maffei LRX 250 Robot Ljdpfx Aew Dcpped Asrk Detailed specification in the attached file.

Condition: new, operating pressure: 200 bar, empty load weight: 206 kg, input voltage: 400 V, warranty duration: 24 months, temperature: 155 °C, KARCHER HDS 13/20-4 SXA PRESSURE WASHER TECHNICAL DATA: Model: HDS 13/20-4 SXA Manufacturer: KARCHER Country of manufacture: Germany Series: Professional Condition: NEW Catalog number: 1.071-936.0 Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 600 - 1300 Working pressure (bar/MPa): 30 - 200 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 9.5 Power cable (m): 5 Weight (kg): 206 Dimensions (L x W x H) (mm): 1330 x 750 x 1060 KARCHER HDS 13/20-4 SXA PRESSURE WASHER EQUIPMENT: Pressure gun: Karcher Professional EasyForce Advanced Automatic high-pressure hose reel: Professional, originally integrated hose reel with a capacity of 20 m - automatic rewind. High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock Ljdjxxkpdepfx Ad Ajrk Pressure regulator: KARCHER Servopress !EasyLock WHY CHOOSE THE HDS 13/20-4 SXA? The HDS 13/20-4 SXA is ideal for medium- and large-scale industrial facilities where cleanliness is paramount. This hot water pressure washer is also successfully used by transport companies, automotive repair shops, and agriculture. It is also suitable for private customers who value the highest cleaning standards. The SXA version of the pressure washer is equipped with an automatic hose reel with a 20-meter pressure hose, which significantly improves comfort and safety during operation. RELIABLE | DURABLE | ERGONOMIC The HDS line emphasizes ergonomics and work comfort. 4-pole, water-cooled motor Two separate detergent tanks ECO mode optimizes fuel consumption (by up to 20%) The unit is equipped with an integrated, automatic hose reel for pressure hose, which significantly improves work comfort. Additional handles allow for transporting the unit with additional accessories. The brass pump head and automatic pressure reduction system extend the unit's lifespan. A large water filter protects the pump from contaminants that may be present in the water. The standard equipment includes an EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on an automatic reel, a Servopress pressure regulator, and a power nozzle. EASY!Force technology reduces the force required to hold the gun trigger to zero. The device also features the EASY!Lock accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is brand new and factory-sealed.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bavelloni glass washing machine 2 pairs of brushes two water circuits Lrsdpfx Adow Tripo Aek operational

Condition: new, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 680 l, color: white, gearing type: mechanical, number of gears: 16, Year of construction: 2025, Equipment: air conditioning, cruise control, fog lights, trailer coupling, = Additional options and accessories = - Immobiliser - Spare wheel - Sun visor = Remarks = Model description: IVECO T-WAY Tractor 6×4 AT720T47TH GVW 26-38 Ton HP 470 R20Tyre MY25 Tractor Head Code Diesel Type: AT720T47TH GVW: 26-38 TON Fifth Wheel: Jost fifth wheel Rear Axle: HR-TP Tyres: 20497 - Tyres 12.00R20 Drive Hand: LH Drive engine power: C13-470 CV Headlamps Protection Roof Rotating LED lights 7+7 Pin Trailer plug Fuel Tank 680 LT Pneum. Horn-Chassis PTO pre - equipment Curtains on door windows 2 lowered bunks w/o prot net Heated Electric rear mirrors rear dampers Front multileaf susp Loads 7500-13000kgs Drive T. 12.00R20 EBS+BAS Safety Hor. Filter cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tank 90A alternator Standard Gear mode 08329 APU free discharge Horizontal batt side fram Manuals EMEA APAC STD Cab insulation Standard grey plastic part Mechanical cab suspension Manual Cab Tilt At lowroof cab Roof in Standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on cc Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 Mounting Plate H=16MM Rear anti roll bar Filter HP TR/No heat ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhand 785mm Bulb rear lights Electronic Battery cut off Emission Euro III Fabric Sta. 2 way Adj Pass Engine Plate Radiator Guard Provision Radio and CB Rear suspension no spacer Rear Axle ratio 4.23 Rear cross member Rear Multileaf Susp Rever Monotone buzzer Steel wheels Grey IC444 chassis Standard Cab Trim MPH/KPH speedometer Speed limiter 90KM/H Soft touch foam steering wheel With stickers 79240 Aux. Chassis for 5th wheel Pre heater Trattam Prot STD Towing version Trye inflation hose Vin Code check digit Warning Triangle Radice VIN WJM STD Setting C11/C13 Lrodpfx Adsw Dukxs Ask Tryes 12.00R20 5th wheel 3 1/2" + moun. Plate Steel front bumper Front Anti Roll Bar

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L, 11 formats Application: Cold glue labeling of bottles Configuration: 20-head rotary table, 3 labeling aggregates Label positions: Front, back, neck/seal label Utilities: Standard Krones control system Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation Ljdpfx Adjy Azv Ss Aerk

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D41VW 34 C 4 NJW 75 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 240/95/H185 mm Ledoy Atrfspfx Ad Asrk -Weight: 10.8 kg

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2020, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Renders Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 5 APK (MOT): tested until 07/2026 Technical condition: good Lrjdpfx Adjyribgs Ajk Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, total length: 13,520 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 6,920 mm, color: black, Year of construction: 2021, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Make of bodywork: Renders Euro 800 Maintenance, history and condition Number of owners: 4 Technical condition: good Visual appearance: good Product safety Lrodpfeym Nmljx Ad Aek Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: Ljdpfx Ajy Em Dged Aork - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: ready for operation (used), * Brand: Nordberg – Bergeaud * Type: CVB 2050 * Surface: 5000 x 2000 mm - 4 Decks Ledpfx Ajywm Eusd Asrk * Driving : 22 kW E-motor * Incl.: springs and springsupport

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, laser power: 20 W, laser wavelength: 1,064 nm, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. Lodpsu Smcbefx Ad Aerk With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally Lrsdpsymnqcefx Ad Aok - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm Lrsdpfeyi T Nijx Ad Ask - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), machine/vehicle number: 17331, grinding area: 200 x 35 mm electrical connection: 380 V, 0,55 kW space needed: 530 x 400 x 1180 mm weight: Ledjd Ixbcjpfx Ad Ajrk

Condition: new, functionality: fully functional, power: 139.74 kW (189.99 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, operation weight: 5,500 kg, Equipment: ABS, air conditioning, airbag, all wheel drive, differential lock, From our immediately available stock of new vehicles, we offer you: TSF-W / MLF Mercedes Sprinter 519 All-wheel Drive 4x4 with Single Tires Are you looking for a compact, off-road capable portable pump fire engine / small fire truck with a generous water supply that can be driven with a fire service driving license or a standard driving license up to 7.5 tonnes? Then we have the solution for you! Chassis: • MB Sprinter 519 4x4 Euro 6 with manual transmission • Matching single tires for high off-road capability • Comprehensive standard equipment Lrodpfx Adexfv R Ho Ask • Vehicle height only 2.62 m Cabin: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater Body: • High-quality body in frame construction made of rust- and corrosion-free material • Fold-out steps for each lateral equipment compartment • Customised equipment storage made from stainless steel as per your requirements • Walkable, non-slip vehicle roof Vehicle Pump / Extinguishing Agent Tank: • High-pressure extinguishing system with foam proportioning system • Water tank 1,000 l with integrated foam agent tank 100 l Firefighting Equipment: • High-pressure rapid intervention hose with 50 m form-stable hose Safety and Lighting • LED lightbar on vehicle roof / 2 LED front flashers • Pneumatic special signal system • 100 W loudspeaker system with public address unit • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED scene lighting on the body and additional spotlights • Pneumatic LED light mast with remote control • Optional: winch • Optional: hygiene board All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!