Used 2 - Roller Gluing Machine for sale (111,535)

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G-13-KS-DX 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 2 motors total power 40kW Condition very good ! Kledpfxjyzrpme Ablot Available immediately.

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Kjdow Na Hbjpfx Ablelt

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Kljdpfx Abodx Suhslot Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: new, functionality: fully functional, Practical – ready for immediate use without instruction. Kledexdxlkepfx Ablst The devices are ready for operation after just 5 minutes of heat-up time. The integrated temperature controller allows stepless adjustment of the heat as needed – ensuring the optimal melting temperature for the adhesive thread. The pressure applied with the hand gluer is sufficient to firmly press the adhesive thread onto the veneer sheet. Key advantages at a glance - only approx. 5 minutes heat-up time - precise, straight-line bonding - clean thread separation - maintenance-free Item no. 0132772

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. Kedpfx Ajxdxbfoblolt The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Item no. 0121383

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Ksdoxdxk Hjpfx Ablslt Standard accessories 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Kledpjxd Sldofx Abljt

Condition: used, machine/vehicle number: Maschinen-Nr.: 89/8085, Rollprägemaschinen werden zum Prägen von massiven oder hohlen Rundteilen eingesetzt. Technische Daten: Hersteller: Borries Markier-Systeme Type: MB76EL Maschinen-Nr.: 89/8085 Prägehub: ca. 220mm Aufspannfläche: 220 x 220mm Kedpfxelbgu Io Ablolt Antriebsleistung: 1,1kW Eigenschaften: - Mit geringem Kraftaufwand sind dauerhaft hohe Prägeleistungen erzielbar - Prägelänge und Prägetiefe einfach einstellbar - hoher Werkstückdurchlass - Anpassung an den Werkstückdurchmesser und die Einstellung der Prägetiefe ist durch die Höhenverstellung des Maschinentisches leicht möglich

Condition: excellent (used), KD-PUTZ with dimple Completely made of stainless steel Sheet metal fettling machine for perforated plates normal plates with 2 edge Kedpfsgh A Svjx Ablelt for 60x80 sheets on the short side edge Top condition Connection 16 Ah

Condition: good (used), Gluing machine Schmedt Präcoll, in a good condition, immediately available If you are interested, we will be glad to inform you about other machines in our house. You are welcome to visit the machine in our house after previous appointment. Kledpfx Ajh H Iu Njblet

Condition: used, - mit 6 Teller - mit 2 Etikettierstationen (Vorder- und Rückenetikett) für Selbstklebeetiketten Technical Details : working direction : left-right, rotative, clockwise capacity bph max. : 6000 labels : self adhesive labels number of labelling stations : 2 number of bottle plates : 6 bottle diamater max (mm) : 100 bottle diamater min (mm) : 60 bottle height max (mm) : 370 bottle height min (mm) : 180 motor height adjustment : yes speed adjusment : frequence converter Kledpfx Ajxyt Avjblet

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Kledpsw Slctefx Ablet Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: excellent (used), functionality: fully functional, Milling Machine DEBER Model FU 2 Kodsylzdyepfx Ablelt ISO 40 Used machine Internal code: SVR 371

Condition: good (used), Year of construction: 2021, Offer 23053 Ksdsrl Iynspfx Ablolt Technical data: - Load capacity per castor support 2000 kg - Roller dimensions Ø 60 x 100 mm - 8 support rollers - Hydraulic lifting device 50 mm - Lifting device must be operated by separate hydraulic unit Hydraulic unit + connecting hoses are not available - Space requirement approx. W 800 x H 350 x D 600 mm - Weight approx. 180 kg each

Condition: good (used), Year of construction: 2006, machine/vehicle number: 80706, Offer 25496 Hydraulic Universal Two-Station Corner Notcher + Punching Machine Technical Data: Station 1: Notching Unit - Cutting length up to 220 mm - Cutting thickness – steel with 400 N/mm² tensile strength: 6 mm - Infinitely adjustable cutting angle by handwheel: 30° – 140° - Pneumatic clamping - Locking stops left & right - Table surface: 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2: Edge Bending Unit or Punching Station - Max. pressing force: 200 kN Ksdpfxox I Nbgo Ablolt - Working speed: 0 to 10 mm/sec - Edge bending up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive: 400 V / 4 kW - Electric foot switch - Required space approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg

Year of construction: 2018, condition: as good as new (ex-display), Offer here as new machine for gluing shafts including corner gluing machine and many high quality tools. Box sizes: Minimum: 80x65x10 mm Maximum: 430x350x120 mm Kljdpfx Ajg U Irweblst More details and price after personal consultation

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Klsdpfx Aonvfc Ejblet

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Kledpfenvfdbsx Ablot

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm. Klsdpfonvfdfjx Abljt

Year of construction: 1984, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. Ksdpfxonvfcte Ablelt

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Ksdeq A Un Sopfx Ablslt

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Kjdpfx Aew S Exusbljlt Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm -maximum thickness of book block; 50mm -power supply; 220 V Kjdpsfhgzaefx Abljlt -input power; 0,1 kw -weight; 75kg -dimension; 60c110c132cm

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Equipment and technical data: - with dual-lift spindle, pneumatic - mandrel diameter: 40 mm - with large table length: 2500 mm - with extendable frame support - with milling fence featuring Panhans metal jaws and fine adjustment Kjdpfx Aowka E Ueblelt Availability: short-term Location: Röllbach

Condition: used, Used machine Used veneer splicing machine of the company Kuper type FW 1150 Kledpjwka Rksfx Ablet passage width: 1150 mm feed speed: approx. 10 - 30 m/min Veneer thicknesses: 0.3 - 3 mm without tables in front and behind Availability: short term Location: Röllbach