Used Wuxi Madis Transformer 1000 Va for sale (11,999)

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Isdpszg Shqefx Altstk Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel

Condition: good (used), Hach DR 3800 VIS Spectrophotometer The DR 3800 is a VIS spectrophotometer with a wavelength range from 320 to 1100 nm. The instrument comes with a complete set of application programs and supports multiple languages. The DR 3800 spectrophotometer includes the following Programs and operating modes: Stored Programs (pre-installed tests), Barcode Programs, User Programs, Favorites, Single Wavelength, Multi-Wavelength, Wavelength Scan, and Time Scan. The DR 3800 Spectrophotometer performs digital measurements in units of concentration, absorbance, or % transmittance. When a user-generated or programmed procedure is selected, a structured menu system and prompts guide the user through the test. This menu system can also generate reports, statistical evaluations of generated calibration curves, and reports on instrument diagnostic tests. Iodpfx Aeiuzvxeltjtk Display modes: transmittance (%), absorbance, and concentration Light source: Halogen lamp Wavelength range: 320-1100 nm Wavelength accuracy: ± 1.5 nm (wavelength range 340-900 nm) Wavelength reproducibility: 0.1 nm Wavelength resolution: 1 nm Wavelength calibration: automatic Wavelength selection: automatic, depending on selected method Scanning speed: = 12 nm/s (in 1 nm steps) Spectral bandwidth: 5 nm Photometric measuring range: ± 3.0 Ext (wavelength range 340-900 nm) Photometric accuracy: 5 mExt at 0.0-0.5 Ext; 1 % at 0.50-2.0 Ext Stray light: < 0.1 % T at 340 nm with NaNO2 Data memory: 1000 measured values (result, date, time, sample ID, user ID) User programs: 50 Meter dimensions and environmental conditions: Width 368 mm; height 144 mm; depth 359 mm; weight 6.4 kg Ambient conditions (operation): 10-40 °C, max. 80 % relative humidity (without condensation) Ambient conditions (storage): -40-60 °C, max. 80 % relative humidity (without condensation) External power supply: 100-240 V/50-60 Hz (input); 15 V/30 VA (output) Interfaces: Use only shielded cables with max. 3 m length. 1 x USB type A; 1 x USB type B Housing protection class: IP3X Circuit classification: Device: Class III; System: Class II Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2012, Arburg 1200T 1000-290 / Vertical machine with a rotary table Year of manufacture: 05.2012 Injection unit: Screw diameter: 30 mm Shot weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical machine with a rotary table Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 2 Iodpfx Aozpal Aoltjtk Control with hot runner system x 18 Injection unit hardened - bimetal Servo motor on the injection unit – fast suction and fast injection Proportional valve on the injection unit – precise injection Self-closing nozzle Primus sensor - tool pressure control Rotary table diameter: 1200 mm Dimensions: Weight: 7200 kg Length/Width/Height: 4.36x1.71x3.66 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. Iedjzuuimjpfx Altstk The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fastener: end clamp, box of 1000 pieces -Type: AK 18-6160/50 H-42 mm -Module frame height: up to 42 mm -Material: aluminum -Price/tax: complete -Transport dimensions: 400/200/H240 mm Ijdjq Sbfyspfx Altstk -Weight: 27.1 kg

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2000027, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 30 kVA, torque: 150 Nm, controller manufacturer: fanuc, controller model: FANUC 31İ-MODEL B, workpiece length (max.): 1,200 mm, workpiece width (max.): 600 mm, table width: 600 mm, table length: 1,200 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, documentation/manual, MATSUURA VX-1000 1200x600mm 15,000 RPM. Our machine was purchased specifically in 2014 for a precision job. Ijdpfjzgv Izjx Altstk It has never been used for rough machining. It has low operating hours. If you have any questions or need further information, please send us a message or call us.

Condition: used, power: 92 kW (125.09 HP), mileage: 96,726 km, overall weight: 3,500 kg, fuel type: diesel, wheelbase: 3,682 mm, first registration: 12/2016, emission class: euro5, Equipment: ABS, immobilizer system, onboard computer, Special Features - Radio - Power steering - Electric windows - Electronic immobilizer - Central locking with remote control - On-board computer - Rearview camera - Anti-lock braking system (ABS) Itsdpfxjxlqmvj Altek - Traction control system (ASR) - Electric window lifters - 6-speed manual transmission - Diesel particulate filter - Ladder rack Superstructure Aerial Work Platform France Elevateur 142 TPFc - Working height: 13.8 m - Lateral outreach: 7.3 m - Basket load capacity up to 265 kg - Remote control - Engine start/stop function - Emergency pump - Hour meter - 2 x A-type outriggers - Transport position indicator light in the driver’s cab - Work basket (L/W/H) 1300 x 700 x 1190 mm - Slewing angle 400° - Basket arm rotation angle 140° - One-hand joystick proportional control of all hydraulic movements in the work basket - 2 x 60° electric basket rotation - Acoustic tilt monitor - Beacon lights - 230V socket in the basket - Power converter 3600 VA - Electro-hydraulic controls - Insulated plastic work basket (1000 V insulation) The Renault Master with France Elévateur 142 TPFc is the ideal solution for companies active in working at heights. The France Elévateur work platform, model 142 TPFc, offers a working height of up to 14 meters and a lateral outreach of up to 7 meters, ensuring safe and efficient access for maintenance and repair tasks. Thanks to the electrical and hydraulic control systems as well as the integrated power converter, the vehicle is extremely versatile. The shortened body provides high maneuverability, making it perfect for use in urban areas, construction sites, and narrow streets. Ideal for telecommunication companies, municipal utilities, electricians, and painting contractors. All functions of the aerial platform are fully operational and have been thoroughly checked by our workshop. The vehicle is ready for registration. German documents, TÜV (MOT) and UVV (accident prevention regulations) are included free of charge. Additional equipment such as trailer coupling, lighting, shelving, and more can be supplied upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos taken directly at our premises – guaranteeing full transparency regarding the actual vehicle condition. Our vehicles undergo comprehensive preparation in our in-house specialist workshop before sale – including mechanics, bodywork, and painting – to ensure optimal preparation for the next technical inspection. Furthermore, we guarantee the authenticity of the stated mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also possible as a remote inspection. Our service offering for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Tailored financing and leasing options - Trade-in of your current vehicle - Installation of special equipment as per your requirements For technical details, more photos or a personal consultation, please feel free to contact us at any time.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Itedpfoygkuwex Altok Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction Isdpfew Hc Spjx Altetk • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Travel range X-axis: 1,000 mm Travel range Y-axis: 800 mm Travel range Z-axis: 700 mm Year of construction: 2001 Control system: HEIDENHAIN TNC 426 / 430 Machine type: 5-axis vertical machining center Machine model: UCP 1000 Travel ranges and movements: X-axis: 1,000 mm Y-axis: 800 mm Z-axis: 700 mm Rapid traverse rate: 30 m/min Max. working feed rate: 10 m/min Spindle and tool changer: Spindle speed: max. 15,000 rpm Spindle shank: HSK-A63 Tool magazine: 30 positions Max. tool weight: 8 kg Max. tool length: 300 mm Table and axes: NC rotary table: diameter 800 mm Table rotation speed: 12 rpm Max. workpiece weight: 1,500 kg Number of controlled axes: 5 Additional features: Spindle torque: 127 Nm (at 40% duty cycle) Axis force: 10,000 N (X and Y/Z) Coolant system: Internal and external coolant Coolant air: through the spindle Measuring probe: Renishaw Tool laser measurement: Blum tool setting and breakage detection Viewing window: 1 x Rotoclear Spindle cooling: Separate spindle cooler Itedpeztp Nfofx Altjk Manual rinsing system for the interior

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet Iedpfezbr U Usx Altotk -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: new, Year of construction: 2024, machine/vehicle number: 240314081, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 850 °C, inner dimension length: 800 mm, inner dimension width: 1,200 mm, inner dimension height: 1,100 mm, total length: 1,170 mm, total width: 2,307 mm, total height: 2,420 mm, overall weight: 1,100 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, SAFTherm STDR-960-12A ANNEALING FURNACE price: 79,000 PLN + 23% VAT The SAFTherm STDR-960-12A annealing furnace was manufactured in 2024 in China by Henan Sante Furnace Technology Co., Ltd. The machine is designed for annealing steel at a maximum temperature of 850°C. Steel annealing is one of the heat treatment processes aimed at reducing internal stresses generated during the hardening process. This process involves heating the steel to a specific temperature below the eutectoid transformation temperature, maintaining it for a certain period, and controlled cooling. As a result, the steel exhibits increased resistance to cracking and higher impact toughness. Itsdpfezkhy Dex Altok The SAFTherm STDR-960-12A is a low-vacuum furnace designed for operation in a controlled atmosphere. It features a large working chamber with dimensions of 800 x 1200 x 1000 mm, allowing for the processing of both individual parts and larger batches. The working chamber is equipped with high-quality thermal insulation, which reduces heat loss and stabilizes the temperature during operation. The system is completed by an intuitive SHIMADEN SRS10 controller, responsible for precise temperature control and programming the parameters of the annealing process. The SAFTherm STDR steel annealing furnace weighs 1100 kg. Technical data of the SAFTherm STDR-960-12A annealing furnace: - controller: SHIMADEN SRS10 - maximum operating temperature: 850°C - rated power: 75 kW - dimensions of the working chamber (length x width x height): 800 x 1200 x 1000 mm - power supply: 380 V; 50 Hz - dimensions (length x width x height): 1770 x 2307 x 2420 mm - weight of the SAFTherm STDR 960 12A machine: 1100 kg

Condition: like new (used), Year of construction: 2019, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 10804, overall weight: 3,800 kg, rotor diameter: 500 mm, number of blades: 5, total length: 2,100 mm, total height: 3,878 mm, total width: 2,283 mm, rotor width: 1,000 mm, power: 52.5 kW (71.38 HP), filling opening width: 1,200 mm, filling opening length: 1,200 mm, input voltage: 400 V, Includes 1 set of new knives, various screens, extraction fan, and cyclone filter. Itedpfx Ajyrc E Esltsk

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Ijdpfjx T Ah Dsx Altstk Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, mileage: 96,726 km, power: 92 kW (125.09 HP), first registration: 12/2016, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,682 mm, emission class: euro5, Equipment: ABS, immobilizer system, onboard computer, Special Features - Radio - Power steering - Electric windows - Electronic immobilizer - Central locking with remote control Iodpfx Alsv N Ei Djtetk - On-board computer - Rearview camera - Anti-lock braking system (ABS) - Traction control system (ASR) - Electric window lifters - 6-speed manual transmission - Diesel particulate filter - Ladder rack Superstructure Aerial Work Platform France Elevateur 142 TPFc - Working height: 13.8 m - Lateral outreach: 7.3 m - Basket load capacity up to 265 kg - Remote control - Engine start/stop function - Emergency pump - Hour meter - 2 x A-type outriggers - Transport position indicator light in the driver’s cab - Work basket (L/W/H) 1300 x 700 x 1190 mm - Slewing angle 400° - Basket arm rotation angle 140° - One-hand joystick proportional control of all hydraulic movements in the work basket - 2 x 60° electric basket rotation - Acoustic tilt monitor - Beacon lights - 230V socket in the basket - Power converter 3600 VA - Electro-hydraulic controls - Insulated plastic work basket (1000 V insulation) The Renault Master with France Elévateur 142 TPFc is the ideal solution for companies active in working at heights. The France Elévateur work platform, model 142 TPFc, offers a working height of up to 14 meters and a lateral outreach of up to 7 meters, ensuring safe and efficient access for maintenance and repair tasks. Thanks to the electrical and hydraulic control systems as well as the integrated power converter, the vehicle is extremely versatile. The shortened body provides high maneuverability, making it perfect for use in urban areas, construction sites, and narrow streets. Ideal for telecommunication companies, municipal utilities, electricians, and painting contractors. All functions of the aerial platform are fully operational and have been thoroughly checked by our workshop. The vehicle is ready for registration. German documents, TÜV (MOT) and UVV (accident prevention regulations) are included free of charge. Additional equipment such as trailer coupling, lighting, shelving, and more can be supplied upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos taken directly at our premises – guaranteeing full transparency regarding the actual vehicle condition. Our vehicles undergo comprehensive preparation in our in-house specialist workshop before sale – including mechanics, bodywork, and painting – to ensure optimal preparation for the next technical inspection. Furthermore, we guarantee the authenticity of the stated mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also possible as a remote inspection. Our service offering for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Tailored financing and leasing options - Trade-in of your current vehicle - Installation of special equipment as per your requirements For technical details, more photos or a personal consultation, please feel free to contact us at any time.

Condition: excellent (used), functionality: fully functional, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 1000 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000kg / 2000 Kg LOAD CAPACITY (KG) 1000 / 2000 Kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT ARM (NM) Itedpozubw Rjfx Altok 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions.

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: B24271F/01, Working length: 3000 mm Itedpfxsy Rruue Altsk Working width: 1000 mm Gluing thickness: 20 – 100 mm Number of levels: 3 Manual rotation The pressing is carried out with a single-sided hydraulic cylinder Number of cylinders per level: 6 The pressure cylinders are fixed Cylinder type: Ø 40 x 150 mm Specific pressure: 6 kg/cm2 Number of pressure bars per level: 3 Each pressure bar has a pneumatic cylinder Type of pneumatic cylinder: Ø 50 x 75 mm Each pressure bar has its own valve for air in/out Pressure regulation with regulator Hydraulic unit Pump flow rate: 5.8 l Hydromotor power: 2.5 kW Max. pressure for the hydromotor: 30 – 160 bar Parking space for the pressure bars

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 1 Hot runner control x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor with inverter drive - energy saving Itedjzc N Emopfx Altjk The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/bottle with compressed nitrogen (additional load for fast operation) Central lubrication Integrated sorting flap Arburg Multilift Select robot 6kg transverse Year of manufacture: 09.2010 4-axis robot: 3 axes driven by servo motors (electric); C-axis - pneumatic Travel paths in axes: X-400, Y-600, Z-1800 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 5180 kg Length/Width/Height: 4.40x1.56x2.02 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: like new (used), functionality: fully functional, load capacity: 1,000 kg, Equipment: documentation/manual, Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit PRODUCT TYPE S10 TYPE CODE S10.1-1HH 1000 kg / 2000 kg Iodpfjzk Rdxox Altotk LIFTING CAPACITY (KG) 1000 / 2000 kg LIFT (MM) 1000 ARM LENGTH (MM) 1500 / 2000 Torque CLAMPING PLATE (NM) 1400 BENDING MOMENT SUPPORT ARM (NM) 3000 FREQUENCY CONVERTER yes LIFT DRIVE hydraulic SELF-WEIGHT (KG) 1700 All machines come with documentation and operating instructions. Price per unit.

Condition: repair required (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 195913-0, overall weight: 1,700 kg, The transformer has a slight oil leak at two fins. Iedpfx Aoztnkbjltjtk

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 18,000 kg, input voltage: 20,000 V, input frequency: 50 Hz, total height: 4,850 mm, total width: 3,400 mm, total length: 3,600 mm, nominal power (apparent): 11,500 kVA, secondary voltage: 690 V, protection type (IP code): IP23, temperature: 40 °C, Equipment: type plate available, Hitachi Energy RESIBLOC® Cast Resin Transformer – 11.5 MVA – New & Unused For sale is a high-quality Hitachi Energy RESIBLOC® cast resin transformer, which was procured for a project but never put into operation. Since delivery, the transformer has been stored exclusively under professional conditions and is therefore factory-new and unused. The transformer is ideally suited for applications in power supply, battery storage projects (BESS), industrial plants, data centers, and other energy-intensive infrastructure projects. Technical data * Manufacturer: Hitachi Energy Germany AG Itedpfxezkmtpo Altjk * Type: RESIBLOC® Cast Resin Transformer * Condition: New, unused, never in operation * Rated power: 11,500 kVA (11.5 MVA) * Primary voltage: 20 kV (switchable to 10 kV) * Secondary voltage: 690 V * Frequency: 50 Hz * Connection group: Dyn5 * Protection class: IP23 * Cooling: AN (natural air cooling) * Design for outdoor installation * Including busbar system * Total weight: approx. 18,000 kg * Dimensions (L × W × H): 3,600 × 3,400 × 4,850 mm Condition * Factory-new * Never electrically connected * Never put into operation * Stored exclusively * Technical documentation available Inspection possible by arrangement. Assistance with loading and transport can be organized if required.

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. Itjdpfxjzmu Aws Altsk This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Itodpfxezlad De Altsk Two-lane machine, manufactured by Heiber & Schröder, Germany. Manufactured in 2011. Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a Nordson hot and cold glue system.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Itjdpfsx Ehg Tex Altok

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg Isdefitfljpfx Altetk