Used Various - Verschiedene Register Punch for sale (8,423)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning Iijdpeyk Dc Nofx Amlsf • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Made in Germany. Iiodpfsziyyajx Amlof

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. Isdpfx Ameu Ick Toleif *

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. Iiedjzd U D Njpfx Amlof 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. Iodpfetzfntex Amleif The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control Iodpspyg Tbofx Amlsif  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Iedpfexrnggsx Amljif Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

Condition: used, mileage: 74,543 km, power: 107 kW (145.48 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 2,910 kg, maximum load weight: 2,090 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 4,750 mm, next inspection (TÜV): 03/2027, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 8,150 mm, loading space length: 5,350 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2013, construction height: 2,790 mm, Equipment: central locking, onboard computer, The Iveco Daily 50C15 COC, a reliable and spacious van, was first registered on November 4, 2013. With a mileage of 74,543 km, the vehicle is in good used condition. The van features a 2,998 ccm diesel engine with an output of 107 kW (145 hp) and belongs to the Euro 5 emissions class. The automatic transmission ensures a comfortable driving experience. Iijdpfszuun Aex Amlsf With a length of 8,140 mm, a width of 2,180 mm, and a height of 2,860 mm, the Daily 50C15 offers ample cargo space. The generous wheelbase of 4,750 mm supports stability and handling, even when fully loaded. The vehicle has a permissible gross weight of 5,000 kg, making it ideal for commercial use with various transport requirements. The yellow paintwork and the green environmental badge (4) complete the profile. This van is in perfect condition and has only had one previous owner. Viewings and test drives are available during business hours. Interested buyers can have the vehicle delivered anywhere in Germany for an additional fee. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 124,780 km, power: 78 kW (106.05 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 06/2026, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, total length: 6,783 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The used Iveco Daily 35 S11 C30C features an automatic transmission and numerous practical functions, making it ideal for businesses and for export purposes. First registered in February 2012, this van has a mileage of 124,780 km and meets Euro 5 emissions standards. It is powered by a 2,287 cc diesel engine with 78 kW (106 hp), offering a combined fuel consumption of 7.9 l/100 km. The vehicle boasts generous dimensions, measuring 6,783 mm in length and 2,770 mm in height, with a maximum payload capacity of 3,500 kg. Equipped with a reversing camera and shelving inside, this yellow van is perfectly suited for daily transport requirements. The technical inspection (TÜV) is valid until June 2026. Various registration and delivery options are available within Germany for an additional fee. Viewings are possible without prior appointment, allowing you to experience the qualities of this Iveco Daily for yourself. Iedpsw Dhyaefx Amlsif Sale is restricted to business customers (agriculture, freelancers, small and large enterprises) or for export only. Errors and prior sale excepted.

Condition: good (used), Year of construction: 1995, Gallus R200B Manufacturer: Gallus Ferd. Rüesch AG, Switzerland Model: Gallus R200B Year: 1995 Configuration: 8-Color UV Letterpress Incoterm: FCA (Free Loaded on Truck) FGT Condition Rating: ★★★★★☆☆ (8/10) _____ Why this machine is of interest The Gallus R200B has earned an outstanding reputation within the label industry thanks to its robust Swiss engineering, exceptional print quality, and long service life. Even today, it remains a highly reliable production press for self-adhesive labels and specialty applications. A particular highlight of this machine is its extensive package of original Gallus tooling, including a large quantity of printing cylinders, anilox rollers, magnetic cylinders, and die-cutting cylinders. This significantly reduces the investment required for a new owner while providing maximum production flexibility from day one. _____ Technical Specification • 8 UV Letterpress Printing Units • Approx. 200 mm Web Width • UV Drying System • Automatic Unwinder • Automatic Rewinder • Rotary Die-Cutting Station • Matrix Removal System • Automatic Web Guide • Electronic Register Control • Touch Screen Operator Panel • Gallus Ink Control System • Pneumatic Web Tension Control • Calvatron Corona Treatment System Iijdpfx Asznwqgomlsf • Complete Electrical Cabinet • Operator Platform _____ Included Tooling & Accessories • Extensive package of Printing Cylinders • Large quantity of Anilox Rollers • Large selection of Magnetic Cylinders • Numerous Rotary Die-Cutting Cylinders • Various Repeat Sizes • Tooling Storage Racks • Spare Tooling • Ink Roller Storage Rack • Electrical Cabinet • Corona Treatment Unit • Operator Platform _____ Main Advantages ✔ Proven Swiss Gallus engineering ✔ 8-color UV letterpress configuration ✔ Excellent print quality for self-adhesive labels ✔ Extensive original tooling package included ✔ Immediate production capability ✔ Reliable mechanical construction with low maintenance costs ✔ Excellent availability of spare parts ✔ Ideal machine for label converters seeking a cost-effective production solution _____

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling Iisdozcp D Nopfx Amlsf 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Year of construction: 2012, condition: good (used), VIVA 420 ANIFLO – Waterless Offset Label Printing Press • Year of Manufacture: 2012 • Configuration: 6-color ANIFLO, waterless offset, fully servo-driven • Web width: 200 – 420 mm • Maximum print width: 420 mm • Print length: 200 – 432 mm (variable, no cylinder/tool change required) • Printing speed: up to 12,000 cyl./h • Dimensions (L × W × H): approx. 12,300 × 2,500 × 1,800 mm Key Equipment Included: • Unwind with roll lift and splicing table Isdpfx Ajxbq Ufomlsif • 6 × ANIFLO offset printing units, waterless technology, fully servo-driven • Technotrans temperature control for anilox, plate cylinder & UV impression roller • IR conditioning unit prior to first print station • Automatic pre-register and motorized lateral & circumferential register • 1 × flexo unit (servo, UV) with anilox roller, chambered doctor blade, ink pump • UV system IST-MBS 5 (6 cooled lamps, stepless control) • BST Powerscope video web inspection system • Gap Master for die pressure management • Format-variable die cutting unit (0.44 mm plate thickness) • Rewinder + matrix rewinder • Slitting unit (4 knives) • Web cleaning system SIMCO DD 320 • Electronic Insetter for pre-printed web re-registration • Various accessories: magnetic cylinder, anilox rollers, spare blankets, wash-up units, etc. Condition: • Very well maintained, complete line, still in production • Visual and technical condition: excellent.

Condition: used, Year of construction: 1996, functionality: fully functional, Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Weitere Gebrauchtmaschinen von Mabu, Bruderer, Bihler und Schaal stehen in unserem Lager zum Verkauf. Technical Specifications Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Iijdjzg U R Iepfx Amlof Max feed length: 250 mm Max width: 200 mm Operating pressure: 3–6 bar

Condition: used, mileage: 141,844 km, power: 62 kW (84.30 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 07/2024, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter, equipped with a 2.0 TDI engine, meets the Euro 5 emissions standard. Delivering 84 hp and a displacement of 1,968 cc, this panel van provides economical driving comfort. The vehicle was first registered in November 2010 and has a mileage of 141,844 km. Featuring a manual transmission, it also offers two practical sliding doors on both sides in addition to its standard truck registration. The exterior is finished in a striking Ginsteryellow. The T5 Transporter is ideally suited for commercial applications, thanks to its high efficiency and a combined fuel consumption of 7.2 l/100 km. It boasts reliable CO2 emissions of 190 g/km and carries a green environmental badge. Dimensions are 4,892 mm in length, 1,904 mm in width, and 1,970 mm in height, with a wheelbase of 3,000 mm. The maximum payload is 2,800 kg. Additional features such as the wooden load floor in the rear and Parktronic assist make daily operation easier. The main inspection is valid until July 2024. The vehicle is in good technical condition and offers various loading options. Sale exclusively to commercial buyers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted. Iiodpfxoy Nykbe Amljf

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm Iiodpfxotndpze Amljf max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Iiodpfezmgi Nox Amlsf Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Extended punching technology: Multitool Thread forming

Condition: used, Year of construction: 2015, operating hours: 11,094 h, load capacity: 1,800 kg, fuel type: electric, power: 11 kW (14.96 HP), gearing type: automatic, overall weight: 3,326 kg, empty load weight: 2,208 kg, color: grey, mileage: 11,094 km, first registration: 10/2015, maximum load weight: 1,800 kg, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, Equipment: onboard computer, The Still RX 20-18P/H is a used electric front forklift, ideal for industrial applications. Equipped with a high-performance 48V lead-acid battery, it offers 28.3 kWh and 775Ah, ensuring extended operating times. The machine features long forks for more flexible cargo handling options. With a power output of 11 kW (15 hp) and automatic transmission, it delivers reliable work performance. Iijdoxxb Hmspfx Amljf This forklift was first registered on 09/10/2015 and has a mileage of 11,094 km as well as 11,094 operating hours. With an overall weight of 3,326 kg, it is robustly built and designed for a wide range of uses. The gray and yellow color combination provides a subtle yet functional look. Inspection is possible without prior appointment. Additional services such as various loading options and a registration service are also available. Delivery within Germany can be arranged for an additional fee if required. Sale exclusively to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 158,223 km, power: 62 kW (84.30 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, lifting height: 2,800 mm, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI offers an efficient solution for commercial users, particularly thanks to its Euro 5 emissions class. Equipped with a 1,968 cc diesel engine and delivering 62 kW (84 hp), it strikes a good balance between performance and fuel economy. The vehicle features a 5-speed manual transmission and is finished in Ginstergelb (broom yellow). The odometer reads 158,223 km. The T5 is equipped with practical features such as two sliding doors on both sides, significantly facilitating access, and a wooden floor panel in the cargo area for added durability. With a combined fuel consumption of 7.2 l/100 km and CO2 emissions of 190 g/km, this model is well suited for both urban operations and longer journeys. Vehicle dimensions are 4,892 mm in length, 1,904 mm in width, and 1,970 mm in height, with a wheelbase of 3,000 mm, providing ample space for various loading requirements. The condition is well maintained; the vehicle is registered as a used vehicle. With a capacity of three seats, it is ideal for small teams or solo operations. First registered in June 2011, it has had only one previous owner. Viewings are possible without prior appointment. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Iijdpfxoy Nyi Do Amljf

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears Ijdpefndy Nsfx Amlsif -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Condition: used, Dimensions (LxBxH): 280 x 150 x 310 cm Year built: 1988 Overall dimensions LxWxH: 2800x1500x3100 mm Iisdpfx Amszm H Ilslef Online auction of metalworking and sheet metal processing machines (including a wide selection of SIEGMUND welding and clamping tables and related tools, SAFAN press brakes and SAFAN guillotine shears, MOSMAN YLS-3000 3kW laser welding machine, various FRONIUS, REHM, etc. welding machines, BOMAR, URSUS, ELHA, etc.), remaining stock of sheet metal, materials and inventory, rolling stock, technical equipment, and modern office furniture, released following the recent bankruptcy of Solex Thermal Science (Netherlands) B.V., formerly Mosman Stainless Steel in Haaksbergen, the Netherlands. The online auction opens Thursday 16 July and closes Thursday 3 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 1 September Pickup days are on: - Thursday 10 September - Friday 11 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, mileage: 195,538 km, power: 70 kW (95.17 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi is a used box van first registered in 2011. With a mileage of 195,538 km, it offers solid performance and reliability. The van is equipped with a 2,143 cc diesel engine producing 70 kW (95 hp) and meets the Euro 5 emissions standard. The automatic transmission and rear-wheel drive ensure comfortable and stable driving characteristics. This yellow Sprinter stands out with its generous interior dimensions, making it ideal for commercial transport applications. It features two seats and comes with additional functionalities such as shelving and a rear-view camera to facilitate loading and maneuvering. With dimensions of 7,057 mm length, 2,100 mm width, and 2,694 mm height, it can be adapted for various loading requirements. The gross vehicle weight is 3,500 kg, allowing for versatile usage. The vehicle is equipped with a green emissions sticker (Euro 4), qualifying it for use in urban low-emission zones. Fuel consumption is rated at 9.8 l/100 km combined, 11.1 l/100 km in urban use, and 9.2 l/100 km extra-urban. Despite its used condition, the van presents itself in good shape and offers a dependable transport solution for commercial purposes. Sale exclusively to business customers (farmers, self-employed professionals, SME and large enterprises) or for export. Subject to errors and prior sale. Isdpfx Aexn Db Ejmleif

Condition: used, mileage: 158,938 km, power: 70 kW (95.17 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, For sale is a Mercedes-Benz SPRINTER 310 CDI featuring a box body, integrated shelving, and a reversing camera. The vehicle was first registered in March 2011 and has a mileage of 158,938 km. Equipped with a reliable 2.1-liter diesel engine compliant with Euro 5 emissions standards, paired with an automatic transmission and rear-wheel drive, this Sprinter delivers powerful, efficient, and long-lasting performance—ideal for commercial use, delivery services, or trades businesses. The box body provides ample space and protection for transporting goods, tools, or sensitive materials. The installed shelving system ensures an organized cargo area, allowing all tools or parts to be securely stored and easily accessible. The integrated reversing camera significantly facilitates maneuvering and parking in narrow streets or on business premises, enhancing safety during all maneuvers. The Mercedes-Benz Sprinter is renowned for its robust and durable construction, ensuring reliable operation even under intensive use. With its solid engineering, comfortable handling, and practical features, it is well-suited for daily deliveries, installation work, or various transport tasks. Iisdpfx Aoxw Ipfsmlsf This vehicle is immediately ready for use and offers a combination of performance, comfort, and versatility that is indispensable for trades, logistics firms, or service operations. Viewings or test drives can be arranged at any time by appointment, allowing you to see first-hand the reliability, functionality, and operational readiness of this Mercedes-Benz SPRINTER 310 CDI. Sale is only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2000, The Carint central impression flexographic printing press is designed for printing on PE, PP, OPP, PET films, and paper. The machine features 6 printing units (6+0), a geared drive, and is suitable for a wide range of flexible packaging applications. Material width: 1,280 mm Printing width: 1,250 mm Print repeat: Min: 360 mm / Max: 1,040 mm Mechanical speed: Up to 300 m/min UNWINDER AND REWINDER The machine is equipped with a non-stop turret unwinder and a non-stop turret rewinder. Maximum reel diameter: 800 mm. Expanding shafts: 3" DRYING SYSTEM Iedpozku Nlofx Amleif Electrical drying system. INK SUPPLY 6 pneumatic ink pumps. ACCESSORIES • Motorized longitudinal register • Chamber doctor blade system • 8 Anilox cylinders • 6 Plate cylinders • Video inspection system • Web guides • Banana rollers • Plate cylinder lifting hoist • 2 electrical hoists • 2 cylinder storage racks with 6 cylinders of various repeat sizes

Condition: used, Year of construction: 2017, Schuler BEUTLER Press Type: MC 4000 Year of manufacture: 2017 Press force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Iiedpfozui Hajx Amljf Die height: 750 mm Table area: 3,000 x 1,400 mm Press weight: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Year of manufacture: 2017 GSW Schwabe, Type: RMA 50/78, Year of manufacture: 2017

Condition: used, material Stahl Iedpjyqvuksfx Amlsif Dimensions (L/W/H) verschieden mm Steel in various dimensions:Example dimensions:250x80x6000 140x120 200x180 330x79x6000 200x200 200x140 approx: 200 to 250 t available The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team