Used Thermo Fisher Scientific/Dionex Ion Chromatography System for sale (41,072)

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System Bjdjxzgtdopfx Anuowr The unit is in full working condition and is ready for immediate release The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 2407001, functionality: fully functional, operating hours: 1,000 h, power: 4 kW (5.44 HP), filter area: 10.5 m², noise level: 75 dB, total height: 1,735 mm, total length: 1,580 mm, total width: 550 mm, overall weight: 182 kg, nominal flow rate: 460 m³/h, negative pressure: 240 Pa, The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Bsdpfx Anjyf Az Touswr

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 22093, functionality: fully functional, volume flow: 4,000 m³/h, filter area: 24.7 m², total height: 3,420 mm, total length: 2,000 mm, overall weight: 725 kg, TECHNICAL DETAILS Filter area: 24.7 m² Volume flow rate: 4,000 m³/h Negative pressure: 2,110 Pa Suction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar MACHINE DETAILS Connected power: 5 kW Motor power: 4 kW Rated speed: 2,925 rpm Rated operating voltage: 400 V Type of current: Three-phase (3 Ph) Rated current: 9.2 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 3,420 mm Bedpfx Aozktr Eonuewr Weight: 725 kg EQUIPMENT New filters

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. Bwodpfx Anszg Nakeusr The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: reconditioned (used), Year of construction: 1994, machine/vehicle number: 941108, functionality: fully functional, total height: 2,520 mm, total length: 2,580 mm, total width: 1,000 mm, Compact dust extraction system with 3 chip collection bags – WITHOUT fan Nominal air flow rate: 5000 m³/h with existing fan – up to 7500 m³/h possible Filter area: 37.5 m² Filtration technology: AL-KO Opti-Jet system consisting of compressed air cleaning (sequence-controlled) and surface filtration Chip collection capacity: 8 solenoid valves Suction nozzle: DN 355 mm Compressed air connection: 1", compressed air, water and oil-free Minimum compressed air consumption 8.5 bar: 1140 NL/cleaning cycle Operating pressure: maximum 8.5 bar Fire extinguisher connection: 1 x 1 1/2" Dimensions WxD approx: 2572 x 981 mm Height approx: 2520 mm Weight without filter approx: 457 kg JET cleaning: A pressure surge on the inside of the filter achieves effective cleaning of the filter hoses on the outside. Easy maintenance: large access doors facilitate filter maintenance, additional inspection covers High-quality filter material: oil and water-repellent surface coating of the filter, for problematic dusts (paint sanding dust, wet dust), filter washable Uniform bag filling: infinitely adjustable distribution flaps enable uniform bag filling Suitable fan: see item no. 7458 D=250 mm - 5000 m³/h extraction capacity With a fan D=350 mm, up to 7500 m³/h extraction capacity is possible!!! Bedpfx Anszqan Hsujwr

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. Bjdpfeuzylhox Anuowr • Year of manufacture: 05/2013 • Total height: 240 cm • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: good (used), Code: 0306 Brand: VM Bsdpfx Ansymfiijuswr Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Condition: used, Year of construction: 2009, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Bwsdpfoh Axrrjx Anujr Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. Bjdpfx Anjzrg I Aouewr The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: excellent (used), Soco System One Man Packing Station Mobile box erector Carton case sealing machine Top and bottom tape heads Model: T-100 380 V, 3 Ph Plastic rollers, roller width: 670 mm Height adjustable legs Total dimensions: 1030 mm x 810 mm x 1660 mm. Bwjdpfx Aohlp Nxonuer

Condition: excellent (used), Year of construction: 2007, load capacity: 5 kg, arm reach: 704 mm, Fanuc LR Mate 200 iC robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Controller: R-30iA MATE Number of axes: 6 Payload: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56 Bwjdpfeqgck Dox Anuer

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. Bodpewc Nrnjfx Anuewr The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases Bodswwtuiepfx Anujwr - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: new, Thanks to their modular design, the PROFI JET® series system filter units enable the bespoke planning and construction of extraction solutions for virtually any required air volume and practically every conceivable application. The proven system also impresses with outstanding noise protection due to its insulated wall panels and, when installed outdoors, minimizes heat loss. Eligible for BAFA funding under Module 4. Operation: The custom-designed extraction systems of the PROFI JET series are built on a robust steel frame. The frame is fully clad with insulated, double-walled, powder-coated steel sheet panels to ensure that all components—including fan, filter cleaning, and discharge elements—are protected from dirt and weather within the closed system enclosure. The clean-air side fans are installed at the top of the unit and draw in dust- and chip-laden air into the filter section. A generously proportioned pre-separation chamber ensures effective separation of coarse particles and chips. The subsequent filter bags or cartridges remove any remaining fine dust. The cleaned exhaust air is routed through a sound-insulated return air chamber either back into the building or discharged outside. Applications: - Extraction at multiple processing machines, workstations, or entire production areas - Spatial ventilation and extraction for enclosures and work cabins - Suitable for virtually all types of dust and chips Bjdjwwryqspfx Anujwr - Also for dusts and applications with ATEX classification - Extraction especially in the wood, plastics, metal, welding, cutting, and recycling industries—as well as many others Advantages: - Custom, precise planning and implementation of your extraction system - Cost-effective and quick delivery due to modular design with standard components - Quiet and energy-saving operation thanks to insulated panels - Consistently high extraction performance due to integrated pre-separation chamber and AL-KO OPTI JET® filter cleaning system - Heating cost savings, as 100% recirculated air operation is possible in many cases - Minimal space requirements due to compact construction - Suitable for indoor and outdoor installation - Professional appearance thanks to powder-coated panels - Available in ATEX-compliant versions - Comprehensive accessories and numerous options for individualized system configuration - Eligible for BAFA funding under Module 4

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: Bjdpfx Aneyrgu Rouewr o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, power: 11 kW (14.96 HP), volume flow: 5,800 m³/h, Extraction system for grinding and deburring machines Bwsdpjzdzfysfx Anusr 11 kW 5800 m³/ h

Condition: good (used), functionality: fully functional, The Vibratome 3000, is used to process tissue specimens into thin slices. It consists of an advancing, vibrating blade to section tissue. The blade amplitude and cutting speed is fully adjustable as is the angle and cut thickness. Bedswgc Tyepfx Anujwr The Vibratome 3000 Sectioning System is a specialized medical and lab equipment used in the healthcare, lab, and dental industries. This device is designed to accurately and efficiently section a variety of materials, making it a valuable tool for researchers, professionals, and students in the field. With its precise cutting capabilities, the Vibratome 3000 Sectioning System ensures clean and consistent results, making it a reliable tool for a range of applications. Good working condition. Please check out our other listings as well.

Condition: new, 3 waste bags capacity 8000 m3/h motor power 7.5 kW bag shaking mechanism air return channel Bedpfx Anezqa Tiouewr power supply 380V

Condition: excellent (used), Year of construction: 2008, Air Plants 'CEF 3 - 7.5Kw' Single bin dust extraction / Filter unit. UK £1950 + VAT. Bwjdpjyvvdqsfx Anujr This unit has been used for fine dust only and has had little use over the years. In excellent condition and immediately available.

Condition: used, We are selling a used extraction unit, model IES 20-35-4 / 11MD, manufactured by Ulmatec. The drive power is 11 kW. Bwodpfxoxxxwce Anuer If you have any further questions, please feel free to contact us!

Condition: excellent (used), Year of construction: 2008, For sale is a used TruLaser 3530 laser cutting machine. Technical data: - Operating hours: Beam-On 2955 h / Laser-On 15464 h - X-axis travel: 3000 mm (max. 3104) - Y-axis travel: 1500 mm (max. 1580) - Xp-axis travel: 300 mm (max. 305 mm) - Z-axis travel: 114 mm - Max. material thickness: 20 mm - Maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2, and Z axes - Max. positioning speed, axis-parallel: 120 m/min - Simultaneous: 170 mm/min - Acceleration during positioning, X-axis: 9 m/s - Xp + Y-axis: 15 m/s - Cutting, X-axis: 4 m/s - Cutting, Xp and Y-axis: 15 m/s Standard equipment: - Enclosed machine frame with integrated laser resonator - Motion unit for optimal processing speeds - Additional highly dynamic Xp-axis - Automatic pallet changer - Enclosed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focal position - Compressed air cutting Bwodpfoixl Tnsx Anuer - PierceLine, reduction of piercing process - PlasmaLine, plasma sensor technology - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spraying device - Positioning laser diode - Programmable cutting gas pressure - Automatic shut-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope, and maintenance-free turbo radial fan - Laser control TASC 3, logbook function, and cooling unit - Laser cutting head with 5 and 7.5 lenses and quick-change device - ControlLine, capacitive height control and process control - Control Sinumerik 840D: Open control - Causes of error messages via diagnostic functions Extended machine equipment: - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price: 55,000 € net Machine is disassembled. Can be viewed after prior arrangement. If interested, please contact us.

Condition: used, This listing is for a Elga Purelab Option Water Purification System with 40l Tank. The unit is in full working condition and is ready for immediate release. Optimize your laboratory's water quality with the Elga Purelab Option Water Purification System, designed to deliver high-quality Type 2 water for various laboratory applications. Key Features: Type 2 Water Purification System: Perfect for general laboratory use and feeding Type 1 water purification systems, ensuring you have reliable water quality for various experiments. 40L Storage Tank: Equipped with a spacious 40L tank, providing ample storage for your purified water needs, minimizing the need for frequent refills. Advanced UV Treatment: Features a dual-wavelength UV lamp (185/254 nm) that facilitates photo-oxidation of feed water, significantly reducing Total Organic Carbon (TOC) levels to less than 30 parts per billion (ppb)—ideal for sensitive applications. High-Quality Deionization: Utilizes a deionization cartridge to achieve resistivity levels ranging from 1 to 10 , ensuring high purity water suitable for critical lab tasks. Built-in Boost Pump: The integrated boost pump facilitates the recirculation of treated water, enhancing the system's efficiency and maintaining water quality over time. Compact and User-Friendly Design: Designed for ease of use, the system’s compact footprint makes it suitable for various lab setups without compromising space. Specifications: Water Flow Rate: Capable of delivering up to 7.5 liters per hour (LPH), ensuring a steady supply of purified water for your laboratory requirements. Resistivity Levels: Achieves resistivity ranging from 1 to 10 megohm-cm, providing high-quality water suitable for sensitive analytical applications. Bedjxxy U Nspfx Anuowr TOC Reduction Performance: Effectively reduces TOC levels to less than 30 ppb, critical for applications requiring ultra-pure water. UV Lamp Specifications: The dual-wavelength UV lamp (185/254 nm) not only assists in TOC reduction but also helps in the disinfection of water, enhancing its overall quality.

Condition: used, This listing is for a Thermogenesis Thermoline MT204 Thawing system The ThermoGenesis Thermoline™ plasma thawers represent the latest in rapid and reliable thawing of plasma and cryoprecipitate, designed for use in clinical and transfusion laboratory environments. These systems emphasize safety, speed, and contamination prevention. Key Features Rapid Thawing: Typical thawing time is 15–18 minutes from a core temperature of -40°C for a 220 ml plasma pack. No Water Contact: Plasma packs are suspended in individual sealed pockets, isolating them from direct water contact. This ensures: No risk of contamination. Bjdjxzh Ipopfx Anuowr If a pack ruptures, contents are safely contained within the pocket. Agitation System: An integrated agitation mechanism gently massages the suspended packs, accelerating the thawing process. Capacity: The MT204 accommodates up to 4 plasma bags simultaneously. Other available models include: MT210: Holds 10 plasma packs MT202: Holds 2 plasma packs Temperature Control: Standard: 35°C ±1°C MT204 also offers an optional 37°C setting for specialized thawing needs. FDA Clearance: The MT204 model is FDA-approved for the thawing of plasma and glycerolized red blood cells. User Interface: Intuitive control panel with one-touch operation and straightforward maintenance indicators.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, suction capacity: 1,200 m³/h, total height: 610 mm, total length: 800 mm, total width: 625 mm, overall weight: 100 kg, The LTA E 120 air filter extraction system is an electrostatic filtration system specifically designed for the separation of oil and emulsion mists in industrial applications. Such systems are characterized by consistently high separation efficiency and contribute to sustainable production. A key feature of LTA filtration systems is the automatic cleaning in place (CIP) system, which ensures consistently high filtration efficiency and long-term operational reliability. This system automatically cleans the filter elements with the cooling lubricant used in the machine, without the use of chemical additives or diluted solutions. Bsdpfxev S E H Us Anujwr

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, suction capacity: 1,200 m³/h, total height: 2,970 mm, total length: 930 mm, total width: 930 mm, overall weight: 250 kg, LTA (JUNKER Group) mechanical dust filtration systems capture and remove dust and fumes in industrial applications. They use cartridge or bag filters to reliably capture even the finest particles. Thanks to automatic filter cleaning, they offer consistently high separation efficiency and are available as mobile or stationary systems. Bwedov S E Ncjpfx Anujr