Used Tbt Tiefbohrtechnik Gmbh + Co Ml200-2-800 for sale (112,478)

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. 1 structural frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, Godpsf Dc D Hefx Aivjkc 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory.

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier Godjwcaqhepfx Aivokc * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Two separate units are for sale. Both units were acquired at the beginning of 2020. Unit 1: - 4.0m suction slit channel AS 590 made of aluminum with neoprene lip seal - 1 piece connection flange DN 315 - 1 piece suction hose carriage Rollfix and central flange for hose DN 250 Price: €450 excl. VAT. Unit 2: - 10.0m suction slit channel AS 740 made of aluminum with neoprene lip seal - 1 piece connection flange DN 355 - 1 piece suction hose carriage Rollfix and central flange for hose DN 300 Gksdpfozuwcvsx Aivoc Price: €1120 excl. VAT.

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. Gjdpfst Hw Ayex Aivjkc " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Max. pumping speed 50 Hz (mbar) 8.9 m3/h Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Oil capacity min./max. 0.45 / 0.85 l Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Gjdpfx Aiow Rqx Djvokc Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete Gjdpjw Ivr Dsfx Aivjkc essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Gksdpow Ivrkofx Aivjc Maintenance doors as swing doors Maintenance easy.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system Gkodpfx Aiozntfmjvec - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, mileage: 1,001 km, first registration: 01/2018, empty load weight: 480 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2018, load capacity: 3,000 kg, Equipment: crane, Vehicle location: Bovenden. Gkjdpfx Aji Rmnzsivjc Complete with Kinshofer swivel head and upper mount! Bucket width: 780mm, capacity: 480l! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Year of construction: 2001, condition: excellent (used), machine/vehicle number: BO834, DEMAG KBK crane canopy crane runway with dimensions approx. 18x6m (6m bridge) This crane is available several times ! Payload / lifting capacity 800 KG - 0,8to Technical data of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Gkodpfx Aeupvyieivec Crane is with internal power supply incl. 800KG Demag DK chain hoist - lifting height approx. 3m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: new, functionality: fully functional, Conveyor Belt EP 630/4 – 800 mm – 5+2 – 15 MPa – PE/PA For sale is a high-quality conveyor belt with the following specifications: Width: 800 mm Type: EP 630/4 Polyester/Polyamide tension members Tensile strength: 630 N/mm Gsdpfx Aoxy Nt Reivskc 4 fabric plies Cover plates: 5 mm top / 2 mm bottom Rubber quality: 15 MPa (standard industrial grade, abrasion-resistant) Material: PE/PA Condition: New / unused Length: 40 m Areas of Application Ideally suited for use in: - Quarries & gravel plants - Recycling facilities - Agriculture - General industry and conveying technology Benefits - High tear resistance - Durable covers - Good abrasion resistance - Suitable for medium to heavy-duty conveying tasks

Condition: like new (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12674082, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Sartorius belt module/conveyor component, type BMK (16) 200x45.6 - manufactured in 2006. For sale is a used but almost new machine from the manufacturer Sartorius Aachen. The device filters out metal objects. The device is in very good condition. The machine was hardly used (estimated usage period: 3 to 6 months) because it was no longer needed in our company. The device must be picked up on site. Gkjdpfx Aijz Iq Naovoc If required, it can be tested again on site.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: K 220808/309b, overall weight: 2,850 kg, total width: 125 mm, total length: 330 mm, total height: 125 mm, Gedpfxez Db Tuo Aivokc

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) Gkodpfx Aijw U N Ixjvsc - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Godpfxex Ap I Hs Aivjkc

Condition: new, For sale: professional MOTEK electric motor with brake. Brand-new unit, warehouse stored, never installed. Italian production – very high manufacturing quality. The motor is fitted with an electromagnetic brake – ideal for industrial applications, machinery, conveyors, pumps, and drives. Technical specifications: Manufacturer: MOTEK Model: ET90SLa-2 Power: 3 kW RPM: approx. 2800 Voltage: 230 / 400 V Gedpfx Aeyvadmeivskc Frequency: 50 Hz Current: 11.9 A / 6.9 A Power factor (cos φ): 0.81 Brake torque: 7 Nm Brake supply: 103 VDC / 230 VAC Duty cycle: S6 40% Weight: approx. 16.2 kg Country of manufacture: Italy Condition: New, warehouse stored Possible minor signs of storage

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT Gjdpjuggb Dsfx Aivjkc  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2016, refrigerant: ammonia Additional title: room cooling Gjdpfx Ajzty Ewoivokc Volume: 10 l Permissible pressure: 32 bar Permissible temperature: 150 °C Rotation speed fan: 1400 rpm Features: refrigerant: ammonia, 1 fan; control cabinet with temperature control

Condition: used, TH0400F-1119-00-2, WEISS heavy-duty table Model: TH0400F-1119-00-2 Type: TH0400FXX- Condition: Used Gjdpoqct Disfx Aivekc

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile Gsdpfx Aieyxccrsvjkc - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics Gjdpfx Aozmqa Eoivjkc • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: used, Year of construction: 1981, Insulated and clad stainless steel pressure tank with various fittings. Additional title: insulated tank Capacity: 12800 l Pressure: 4 bar Temperature: 20 °C Length: 5,1 m Width: 2,1 m Weight: 2000 kg Material: stainless steel Gsdpfx Ajztyy Uoivokc Position: hozizontal Features: insulated and cladded, outlet DN65, manhole, 2 spray heads

Year of construction: 1992, condition: used, Plate heat exchangers for milk processing. Gjdeh Eulgspfx Aivekc

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. Godpfx Ajzqc Hroivekc The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.

Condition: new, functionality: fully functional, For sale is one (1x) safety door switch with the article number 541010. Gksdpfx Aiezxpvpsvjc This item comes from warehouse stock / spare parts stock. The optical condition can be seen in the attached images. We will gladly provide further technical documentation or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible at the buyer's expense. Subject to prior sale, errors and changes.