Used Tarra Smart 900 Mps for sale (5,415)

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Podpfx Ajgq N Ezjmpsgk JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 tons - Width: 2.50 m Psdpfjv Nhyfox Ampjgk - Height: 3.10 m - Length: 9.70 m

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles all stainless steel Psdsymxgbjpfx Ampogk 2 motor: 2 x 4kW safety lid dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Pgodpfx Amjx Ik Tkepsk Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition Pgjdexuv Udspfx Ampok used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2006, control Rexroth Podpjwzmrijfx Ampsgk

Condition: used, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: G22I970759, fuel type: diesel, motor manufacturer: Cummins QSK23-G3, General information Field of application: Construction Weights Empty weight: 6.345 kg Pedjxzap Sjpfx Ampsgk Functional Generator capacity: 900 kVA CE mark: yes Other information Fuel consumption: 134 L/Hour at 75% Load Prime Generator: Stamford HCI634H1 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 4,32x1,86x2,15 Production country: IN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel = Remarks = Surplus unused 2022 generator set.

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Pgsdpeyvfq Eofx Ampok Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Weight approx.: 200 kg

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Pgedpfxeytd Spj Ampok Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, DGUV certified until: 04/2027, cutting width (max.): 24 mm, total length: 690 mm, total width: 650 mm, total height: 1,100 mm, nominal power: 2 kW (2.72 HP), input frequency: 50 Hz, year of last overhaul: 2025, space requirement height: 1,100 mm, space requirement length: 690 mm, space requirement width: 650 mm, Treif Diskus Smart Circular blade machine Stainless steel design Max. 130 slices per minute Blade newly sharpened and coated Dimensions: 650 x 690 x 1100 mm (W x D x H) Exclusive to us: DGUV V3 electrical safety inspection Connection: 400V, 16A CEE plug Used machine with warranty + spare parts service Psdpfx Amewbm Rxjpogk Options: Delivery service Maintenance contract Spare blade E-Box Service package Delivery service Instruction & commissioning Visit our large bread slicer showroom!

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. Pgedefg E Hpepfx Ampek • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Pgodpfx Ajd Iip Aompjk Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Pjdoylx Hropfx Ampsgk

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,025 h, load capacity: 8,000 kg, lifting height: 4,855 mm, free lift: 1,530 mm, load center: 900 mm, fuel type: diesel, mast type: triplex, construction height: 3,010 mm, fork carriage width: 2,200 mm, fork length: 2,400 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: NEW, rear tire type: cushion tires (black), rear tire size: NEW, drive type: Diesel, Diesel forklift Load center: 900 mm Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 – 10,000 kg Mast type: Triplex Condition: Refurbished, without warranty Technical condition: very good Front tires type: Superelastic Front tires size: factory new Front tires condition: New Rear tires type: Superelastic Rear tires size: factory new Pgsdpfx Aex E Ekxompsk Rear tires condition: New Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, road approval (StVZO), full cab, rotating beacon, LED,

Condition: used, cleaning machine, sweeper vacuum machine, Used machine Manufacturer: Kärcher Type: KSM 900 B Dimensions: 1650 x 750 x 1020 mm Working width: 0.8 m Pjdpjy E T Aisfx Ampsgk Battery: 2 x 12 V The battery is not included with the machine.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, used Timesavers Model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered up and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Conveyor speed, frequency-controlled: 2.5 - 14 m/min Pedpfx Ameyu Tfhopogk Electrical: Conveyor motor, frequency-controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connections: 400 V Frequency: 50 Hz Control voltage: 24 V Total power: 28 kW Compressed air: Required air pressure: 6 bar Total air consumption: 20 l/min Total dedusting capacity: Required extraction capacity at 100 mm WG: 3,000 m³/h W Unit: Roller unit Contact roller assembly, Ø150 mm Contact roller rubber hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W Unit: 15 kW B Unit: Brush unit Brush Ø200 mm Oscillation: 110 H/min Main motor: 11 kW Total power B Unit: 11 kW Machine version according to CE door switch Emergency stops at infeed and outfeed of machine Unpacked machine weight: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Condition: good (used), Year of construction: 2013, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, wet-dry vacuum cleaners, liquid and chip vacuum cleaners, water vacuum cleaners, wet vacuum cleaners -Manufacturer: Numatic, industrial vacuum cleaner type WVD 900-2 Pgodpfjiaqmfex Ampok -Connection: 230 volts -Power: 2400 W -Number: 1x industrial vacuum cleaners available -Dimensions: 740/485/H880 mm -Weight: 23 kg

Condition: ready for operation (used), Offered is a surface grinding machine (cup wheel grinder): Table surface X/Y: approx. 175mm/450mm, max. grinding length: approx. 200-250mm, max. grinding width: approx. 175mm, speed: approx. 2800rpm, weight: approx. 450kg, inspection possible by appointment. Podpfeyzr Iiex Ampjgk

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Pgodpfx Aeyy Uzcjmpok

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Pjdpfxow Hfd Ij Ampsgk Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: excellent (used), power: 29 kW (39.43 HP), fuel type: electric, color: other, Year of construction: 2020, Year of manufacture: 2020 Empty weight: 3.300 kg Dimensions (LxBxH): 351 x 180 x 208 cm Chassis type: rigid Steering: skid steer CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Work lamp(s) Pedpfxoykvnqo Ampogk = Remarks = General Country of production: Slowakije Condition CE type: CE

Condition: excellent (used), power: 29 kW (39.43 HP), fuel type: electric, color: other, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 3.300 kg Dimensions (LxBxH): 351 x 182 x 208 cm Chassis type: rigid Steering: skid steer CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Work lamp(s) = Remarks = Pgsdjv Snlmspfx Ampok General Country of production: Slovakia Full electric skidsteerloader, Enclosed cab, Incl. charger

Condition: excellent (used), Year of construction: 2023, operating hours: 1,093 h, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, total height: 3,210 mm, total length: 6,350 mm, total width: 2,260 mm, color: other, Year of manufacture: 2023 Empty weight: 16.539 kg Lifting capacity: 8.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = Psdpfx Amsw U U Ahopogk - 3rd hydr. circuit - 4th Hydr. circuit - Blower - Freelift - Non marking tires - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE Kaup forkpositioner and side-shift, Forks 2400 mm, Battery charger, Non marking tyres

Condition: ready for operation (used), Year of construction: 2025, Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details. • Condition: New • Application: Classic cutting of rectangular workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil, or veneer • Workpiece/panel capacity: • Length: from 140 mm • Width (finished size): min 50+50 mm; max 450+450 mm (asymmetrical cutting possible) • Thickness: 8–40 mm • Max workpiece weight: approx. 30 kg • Shape: rectangular • Working height: 900 mm • Machine side: Right-hand machine (stop side on the right in the direction of travel) • Feed/adjustments: • Feed speed: 5–40 m/min, servo-controlled • Electronic height adjustment: 5–45 mm via Beckhoff servo axis • Right-side Teflon stop ruler, servo-driven • Left infeed ruler with pneumatically spring-loaded unit, servo-driven • Construction/transport: Pedpfxeyuggxs Ampjgk • Sturdy welded steel frame • Transport by belt with height-adjustable top pressure • Low-maintenance belt with gentle transport coating • 32 mm V-belt top pressure with spring-loaded rollers for reliable guidance • Aggregates: • Aggregate 1: Frequency-controlled scoring saw • Perske motor 4.4 kW, 50 Hz, 400 V, 4500 rpm • Tool holder D=35, key • External + internal thread R/L, servo-controlled, tandem, non-swiveling • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Max saw blade Ø 350 mm • Flow-optimized extraction hoods • Without tools • Aggregate 2: Frequency-controlled main saw • Perske motor 6 kW, 50 Hz, 400 V, 5000 rpm, counter-rotation • Tool holder D=35, spline shaft, external + internal thread R/L • Max saw blade Ø 400 mm • Split wedge adjustable by hand • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Flow-optimized extraction hoods • Without tools • Control and HMI (Beckhoff): • PC-based control with integrated PLC and electronic line control (TwinCAT 3) • 15.6" multitouch panel with integrated keypad/keyboard/mouse • Simple, component-oriented program creation; freely definable program names; virtually unlimited program memory • Operation via keyboard/mouse/touch; message system for operator/error messages • MDE Basic: production time, setup time, downtime, fault time, unit counter, adjustable recording period • Fast EtherCAT fieldbus; Ethernet RJ45; USB port • Uninterruptible power supply (UPS) for panel PC • PLC programming per IEC 61131-3 • Feed lock for adjacent machines/transport systems • Included with basic machine: • Sound absorber/protective hood with safety lock • Connection pieces for external extraction (min air velocity 28 m/s, negative pressure 2480 Pa) • Compressed air connection with maintenance unit • Integrated control cabinet with cooling unit (ambient 10–45 °C) • Safety and protective measures per CE; CE mark • Utilities and specs: • Operating pressure: 6 bar • Power: 3/N/PE, 400/230 V, 50 Hz, ±5% (ECD protective circuit not applicable) • Language: • Machine labeling: German • Operating instructions: German • Spare parts lists: German • Paint finish: • Base/cladding: Gray-white RAL 9002 • Aggregates: Dust gray RAL 7037

Condition: excellent (used), functionality: fully functional, RADIAL DRILL EMA 900 X 35 USED MACHINE INTERNAL CODE: CAR 127 Pgedpfxjylzfwj Ampok