Used Strohauer Table Trolley for sale (17,984)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade • Cutting width 1350 mm • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide • 7'' touchscreen control panel • Modern SynchroDrive drive technology • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit Isdpfezvdwpsx Altstk • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. Ijdpfszlubdox Altetk It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 7000/2000/H910 mm -Load capacity: 21 t -Tires: Vorwerk 645/300-410 solid rubber Itedpfeyzd R Njx Altsk -Drawbar length: 1900 mm -Transport dimensions: 7000/2000/H910 mm -Weight: 2630 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Itedpfezifpgsx Altok

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable Itodpfeymampsx Altek with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Year of construction: 2015, condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7000/2000/H730 mm -Load capacity: 15 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 8665/2000/H730 mm -Transport dimensions: 7000/2000/H730 mm Iodpfxsydpvnj Altetk -Weight: 1940 kg

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT) Isdpfezfv T Iox Altjtk

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with turntable steering -Platform: 1250/6540/H660 mm -Load capacity: 1.0 t -Tires: Solid rubber 6.00-9 -Number: 3x heavy-duty transport trolleys available Price: per piece Itodpfx Aeyq E Itjltjk -Transport dimensions: 5200/1250/H660 mm -Weight: 420 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine was serviced annually (most recently in December 2025) – service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 with 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity normal steel: max. 12 mm Cutting capacity stainless steel: max. 10 mm Cutting capacity aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the output of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Itodpfjzrnhwex Altek Operating hours (according to the counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loader and unloader Filtration system Manuals

Condition: used, Year of construction: 2022, Biesse Rover AS FT 2231 CNC Router (2022) with Biesse B Solid Control, Table Size 3100mm x 2200mm, Spindle Speed 24,000rpm, HSK F63, 12-Station ATC, Multi-zone Vacuum System, Weight 3800kg, Air Supply 7.5 - 8 Bar, Suction Flow Rate 30m/sec. S/No. 1000058894. Country of Origin: India Please Note: This lot has been professionally decommissioned and secured for transit Please Note: This lot is located in Burton-on-Trent. A charge of £750 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Itodpfx Aezvc Iyoltek

Condition: new, Year of construction: 2026, CORMAK TH410 Thickness Planer – Industrial-Grade Precision for Professional Woodworking The CORMAK TH410 is a professional, industrial-class woodworking machine designed for precise and repeatable thickness planing. Equipped with a four-knife cutterhead, it delivers exceptional surface quality in a single pass. Thanks to its heavy-duty construction, stable worktable, and adjustable feed speed, the TH410 planer is ideal for high-intensity production of solid-wood and laminated components. Itedsx Dlabjpfx Altsk Key Advantages of the CORMAK TH410 Planer Precision 4-knife cutterhead – ensures excellent surface finish and efficient material removal in a single working pass. Cast-iron worktable – a ground and polished table surface provides outstanding material glide and precise feed. Planing range 5–230 mm – suitable for both thin boards and large structural components. Selectable feed speed – allows adjustment of working parameters according to wood type and production requirements. Digital height adjustment system – highly accurate settings (up to 0.1 mm) enabled by a clear digital indicator mounted on the handwheel. Stable column-supported table – central support minimizes vibrations and increases processing repeatability. Safe and convenient operation – a hinged extraction hood allows easy access to the knives for quick replacement. Standard Equipment Four-knife cutterhead Polished cast-iron worktable Extraction and noise-reduction hood Extended table with rollers Digital height gauge Full safety features compliant with CE and operating manual requirements Optional Equipment Dust and chip extraction system Transport trolley Knife-setting jig Technical Specifications Parameter Value Planing width 410 mm Planing height adjustment 5–230 mm Cutterhead diameter 95 mm Number of knives 4 Cutterhead speed 4050 rpm Maximum cutting depth 4 mm Feed speed 6 m/min Dust extraction port Ø100 mm Total motor power 4.2 kW Motor power (S1 100%) 3.0 kW Voltage 400 V Extraction outlet diameter 100 mm Gross weight 266 kg Dimensions Parameter Value Width 1110 mm Depth 710 mm Height 1020 mm Table width 930 mm Table depth 410 mm

Condition: defective spare-parts repository (used), Year of construction: 1980, Machine: Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control: NC control, HEIDENHAIN TNC 131 Electrical cabinet: by Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8 – 1600 rpm Table size: 1000 x 1120 mm Table rotation: 360° Max. workpiece weight: 2,500 kg Feed ranges: 0.8 – 2,000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirement: approx. 5.3 x 3.8 x 3.14 m Ijdpoygarljfx Altetk Special features and notes: Electronic issue: There is an electronic problem (control board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to account for the necessary repair work. The HEIDENHAIN contouring control and the mechanical components of the machine are in good condition. Inspection is possible by appointment to assess the machine's condition and the extent of the electronic issue. For further technical details, please refer to the attached data sheet. Important information: All information is subject to confirmation, prior sale, errors, and availability. Technical data and all information provided are non-binding and only for orientation purposes. Contact: If interested or to arrange a viewing, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees that the item is purchased in its current condition, "as seen," with no right of return. No liability is assumed for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above-mentioned terms and conditions.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,294 h, functionality: fully functional, machine/vehicle number: P087WH855, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range X-axis: 700 mm Travel range Y-axis: 400 mm Travel range Z-axis: 330 mm Rapid traverse speed: 54 m/min Spindle speed: 100–10,000 rpm Distance spindle–baseplate: 250–580 mm Main spindle power: 5.5 kW Iodpozul Tcjfx Altjtk Table area: 650 × 400 mm Table load: 300 kg Tool positions: 21 MACHINE DETAILS Dimensions & Weight Dimensions: 1,565 × 2,027 × 2,336 mm Machine weight: approx. 2,200 kg Operating hours: 10,294 h EQUIPMENT Central oil interval lubrication 100 mm column extension Interior lighting 16 additional I/O Rapid traverse with bell-shaped acceleration and deceleration Manual handwheel feed Directory display from memory card 1,000 storable programs Multilingual display Thermal compensation of the XYZ axes Parameter backup function Retraction cycle for tapping without a compensating chuck MANUAL GUIDE Background editing Extended part program editing Coordinate system selection G92 Workpiece coordinate system G52–G59 48 additional workpiece coordinate systems G54.1 Return to reference point G28 Quick Editor Setup file Production counter Tool correction memory C for D/H code and wear Threading without a compensating chuck M29 Subprogram call M98/M198/M99 Customer macro B G65, G66/G67 Drilling cycle G73, G74, G76, G81, G89/G80 Coordinate system rotation G68/G69 Circular interpolation with R programming AI Contour Control I G05.1 Helical interpolation Skip function G31 Multi-step skip G31 P1–P4 Verification of travel limit before movement Verification of stored travel limit 1 Verification of stored travel limit 2 G22/G23 Customer-specific PMC Real-time customer macro

Condition: like new (used), Year of construction: 2017, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2014.15.P1272 PCCB.98.F, type of input current: three-phase, input voltage: 400 V, type of cooling: air, welding power (max.): 13 kVA, open-circuit voltage: 86 V, welding current at 100% duty cycle: 220 A, protection type (IP code): IP21, welding current (max.): 300 A, input frequency: 50 Hz, continuous power (apparent): 9 kVA, Equipment: type plate available, We offer a practically new, lightly used welding machine (80 hours of operation). PRICE NET FOR the power source 300 CA + splitter for 2 welding heads + trolley with cooler. (First 12 photos) Prices for other equipment, welding heads, etc., available upon request. Orbitalum ORBITAMAT 300 CA AC-DC Orbitalum 300 CA (cooler included), Splitter for operating 2 welding heads, ORBICAL S trolley, year of manufacture for the above-mentioned equipment: 2017, Remote control included for working at height, which improves operation with the welding heads. (Rated supply voltage: 3×400 V Frequency: 50/60 Hz Welding current at 40% duty cycle: 300 A Welding current at 100% duty cycle: 220 A Open-circuit voltage (U0): 86 V Arc voltage at 100% duty cycle (U2): 22 V Arc voltage at 40% duty cycle (U2): 18 V Apparent power S1 (100%): 9.0 kVA Apparent power S1 (60%): 13.5 kVA Protection class: IP21 Insulation class: F Cooling: AF Standard: EN 60974-1) Included (possibility of selling individual items) Welding head, manufacturer: Orbitalum, type/model: TP 600 KD, serial no.: 717, year of manufacture: 2018, diameter: 70 – 170 mm + ground cable. Welding head, manufacturer: Orbitalum, type/model: OW 19, serial no.: 1316, year of manufacture: 2017, diameter: 3 – 19 mm - NEW - unused, as shown in the photo. Set of plugs, manufacturer: Orbitalum, type/model: Orbipurge 12-110 - 2 sets or more. We have many more items from ORBITALUM, most of which are practically new, from a company liquidation in Poland. Closed welding heads 115, 76, 19, plus aluminum inserts, facing machines 8.6 and 2.5, orbital saw GFX 3.0, tripods, gas control devices Cloops CPSC 185, articulated videoscope 7.5 m IRIS 46-75 DVRX, all at attractive prices, VAT invoice available. Significant discounts for larger purchases. Equipment can be inspected in person in Rzeszów, Podkarpackie region. Shipping is possible throughout Europe. If you have any questions or need additional information, please send a message or contact us by phone (Polish - English). Itjdpszclw Eofx Altok

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: MAFI, heavy-duty transport trolley with 1-axle turntable steering and parking brake -Platform: 4000/2500/H895 mm -Load capacity: 22 t Iodpfjyl Urqsx Altetk -Tires: Solid rubber dual tires 540x200x410 see photos -Overall dimensions: 5750/2500/H895 mm -Transport dimensions: 4000/2500/H895 mm -Weight: 2720 kg

Condition: good (used), Year of construction: 1960, Make: Bäuerle, including integral fence and HolzHer power feed Model: SFM 2 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole-changeable 6 speed settings: 1,800 - 4,500 - 5,600 - 6,000 - 9,000 - 12,000 rpm Forward/reverse rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space approx. 1200 x 1200 x 1300 mm Weight approx. 1000 kg Iedpfx Aloy E T Ufjtetk Location: 54634 Bitburg, loaded free on truck, unpacked Delivery in current condition as inspected, function-tested without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 400 V, total height: 2,890 mm, total width: 2,440 mm, total length: 2,890 mm, Mobile Welding Station 10ft for PE/PP Pipes incl. HÜRNER CNC 500 (SST Series) Itedoyzn Ifopfx Altsk Weather-Independent Butt Fusion Welding at Industrial Standards Stop building makeshift welding tents on site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell for demanding PE/PP pipeline construction. Plastic weld seams do not tolerate drafts or moisture—this container guarantees consistent, standard-compliant environmental conditions and complete documentation. Your advantages in pipe handling: The bottleneck on site is the handling. This station is uncompromisingly designed for ergonomic efficiency. Pipe sections are passed directly through the container using the 800x800 mm end-side pipe doors (with integrated brush seals). The built-in 1,000 kg lifting table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-person job. Plug & Play: Connect power and start welding. Technical Data (SST 10 / 500): Container: 10" High Cube, Double Door, One Way (incl. chequer plate steel floor) Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management Working range: OD 200 to OD 450 mm (including reduction inserts) Lifting technology: Electric lifting table (1,000 kg), electric chain hoist with trolley/manual trolley (3m lift) Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe doors (800x800 mm) Power supply: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), RCD 63A Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fittings Condition: Fully prepared for welding (CE), incl. DGUV inspection & 2x thick coat paint (color of your choice) (Note: Supplied without power generator) Available configurations in this series: This listing refers to version SST 10 / 500. We manufacture these stations in four standardized performance classes to suit your project: SST 10 / 355: 10-foot container, suitable up to OD 355 mm SST 10 / 500: 10-foot container, suitable up to OD 450 mm (offered model) SST 20 / 355: 20-foot container (extended work area), suitable up to OD 355 mm SST 20 / 500: 20-foot container (extended work area), suitable up to OD 450 mm Custom modifications are available on request. Contact us for a detailed quotation.

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Ijdpfx Aljtwgirjtjtk Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, Year of construction: 1990, machine/vehicle number: 90-10-175, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, saw blade diameter: 450 mm, height adjustment type: mechanical, actuation type: manual, Equipment: saw blade guard, Altendorf table saw, model F-90, as shown in the photo. Year of manufacture: 1990. The saw is being sold because it has been replaced by a new one. It is still in perfect working order. Itodpfx Aszq Srqjltjk It will be transported on a wooden pallet and can be loaded onto a truck using a forklift on site. Sold as is, no warranty.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering Itsdpeyq R H Usfx Altsk -Platform: 5350/1320/H840 mm / 4100 mm extendable to 9360 mm -Load capacity: 15 t -Tires: Solideal 425/150-305 solid rubber dual tires -Transport dimensions: 5350/1320/H840 mm -Weight: 1760 kg

Condition: excellent (used), Robland Z320 panel saw 320 cm carriage, 0-45 degree tilt, and manual height adjustment of the saw blade right-hand fence adjustable manually up to 1370 mm, 0.75 kW scoring saw, 5.5 kW motor Itsdpfx Aozu Iz Noltsk max. blade diameter 400 mm. 3 cutting speeds Very good condition, ready for work.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, The machine is in good technical condition, including a rotary table S 35, table dimensions 2850 x 3150 mm (photo in the attachment), 2 clamping plates, a HUI 50 swivel head, a tool magazine for 80 tools, and a Siemens 840 D control system. WRD 150 CNC Year of manufacture: 2008 Control system: SINUMERIK 840 D Itedpfx Aey U Ndzsltek X-axis: 9000 mm Y-axis: 4000 mm Z-axis: 1000 mm W-axis: 800 mm Power: 60 kW Tool magazine capacity: 80 tools Clamping plates: 2, 6000x2000 mm Swivel head: HUI 50

Condition: used, Year of construction: 2021, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We offer this used Felder kappa automatic 80 sliding table saw. Machine can be very fast in production if presented with an equally fast operator. The cuts are perfect, 90 degree angle is easy to adjust (and should be done regularly). We also offer all of the saw blades as well as undercutters we have to it. Model: kappa automatic 80 Voltage: 400 V Phases: 3 Frequency: 50 Hz Current: 36 A Power: 14.0 kW Year of construction: 2021 year Weight: 4200 kg Ijdey Dda Aspfx Altetk If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, Thickness and Surface Planer CORMAK PT310ECO with Cutter Block – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer‑thicknesser engineered for high-quality finish, reliability, and low noise levels. Thanks to its cutter block, it is an advanced woodworking machine combining jointing and thickness functionality in a single robust structure. The stable build and powerful motor make it a versatile solution for professional woodworking—ideal for both carpentry shops and artisan workshops. Key Machine Advantages Cutter-block shaft – three HSS knives 310 × 25 × 3 mm ensure long service life, precise planing, and reduced noise. Itedpfxsw Ab Twj Altok Massive work tables – cast iron construction minimizes vibration and ensures stable material feed. High power – motor rated at 2.2 kW (S1) / 2.6 kW (S6) provides consistent performance even under heavy loads. Large working area – 310 mm width and up to 180 mm thickness capacity accommodate various workpieces. Efficient chip extraction – Ø100 mm port enables seamless connection to a dust‑extraction system. Construction and Technology The PT310ECO is equipped with a 75 mm diameter cutter block that ensures smooth operation and superior durability compared to conventional knives. The planer/thicknesser features cast‑iron tables sized 1290 × 310 mm (surface planer) and 540 × 310 mm (thicknesser), both highly wear‑resistant. Additionally, the machine offers fence angle adjustment from 90° to 45°, enabling precise angled milling. Precision and Performance Maximum planing depth Jointing mode: 3 mm Thicknessing mode: 4 mm Cutter-block rotational speed: 5,500 rpm Stable structure enables finishes ready for gluing, coating, or further processing. A reliable thicknesser for both serial production and smaller‑scale projects. Applications Ideal for: Professional carpentry and furniture workshops Prototyping labs and training centers Maintenance departments in industrial plants Technical schools and vocational institutions Standard Equipment Three‑knife cutter block Cast‑iron work tables Cutter head guard Ø100 mm chip extraction port Feed‑in switch and safety shutdown Optional Equipment Mobile trolley for the machine Chip‑extraction unit Technical Data Specification Value Surface‑planing table size 1,290 × 310 mm Thicknessing table size 540 × 310 mm Cutter-block diameter 75 mm Cutter-block speed 5,500 rpm Number/dimensions of knives 3 knives / 310 × 25 × 2.5 mm Fence angle adjustment 90°–45° Chip outlet diameter 100 mm Max. thicknessing height 180 mm Max. cut depth: planing/thickness 3 mm / 4 mm Motor power (S1/S6) 2.2 kW / 2.6 kW Max. workpiece width 310 mm Gross weight 200 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 6297, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 380 V, cutting height (max.): 100 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, Industrial table saw with 3000mm table. The blade cannot be tilted. It has been in everyday use, being sold becuse of machine change. It needs a little fine adjustments, but it works well. Pre-cutting motor was added to the machine. Itsdpozi Emrsfx Altok