Used Sorting Plant for sale (3,850)

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® VS BIG vibrating screen offers a robust and powerful platform for a wide range of screening tasks. Featuring two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors, where many different materials must be processed within tight time frames. Technical Specifications: - System capacity: 40-150 t/h - Maximum bucket width: 3 m Gkjdpfx Aswhmlveivjc - Screening area: 12.8 m² - Drive power: 400 V / 2 x 1.5 kW - Weight: 2457 kg - Width: 3.62 m - Length: 2.41 m - Height: 2.85 m - Loading height: 2.46 m Options: - Bars - Hopper - Support feet - Separator plate

Condition: good (used), Year of construction: 2000, For sale is a used mixing plant in container, EKATO EM 2060, year of manufacture 2000. Stainless steel mixer in a 6 m container. EKATO mixer EM 2060, 1 bar, 25°C, 80-122 rpm. Control system Schoregge GmbH. Complete with controls, scale, etc. Mixer dimensions: Diameter: 1.60 m, Height: 0.80 m, Volume: 1600 l. Gkjdjw H Sbxjpfx Aivec

Condition: used, charge load 125 liter 1.000 mm tank diameter / tank height 920 / 480 mm 210 mm voltage 380 V Gjdpfov R Hwxjx Aivekc weight of the machine ca. 630 kg dimensions of the machine ca. 1,10 x 1,50 x 1,30 m

Condition: used, functionality: fully functional, Infeed: 1,000 x 350 mm, max. workpiece size: 320 x 320 mm, 45 kW electric motor 4-stage vibrating feeder HERWEG, approx. 800 x 4,000 mm, 2 x 4 kW drive with infeed and outfeed hoppers Gedpfxjwb Dfgj Aivjkc semi-mobile steel structure with platform, railings, and access stairs.

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Gkjdpfx Aiswcwbqsvsc

Condition: used, Complete primary and secondary crushing plant, consisting of the following components: Primary crusher: LOKOMO K-140 single-toggle jaw crusher 1,400 x 1,200 mm, feed hopper, vibrating feeder and discharge chute. Secondary crusher: LOKOMO G4214 cone crusher, cone diameter: 1,350 mm, feed and discharge box, electrical and hydraulic installation. Screening plant: LOKOMO B 256T, screen area: 4,000 x 1,300 mm, with steel structure. Secondary crusher: LOKOMO S21-14 cone crusher, cone diameter: 2,100 mm, hydraulic installation; optionally with steel structure. Conveyor belts: LOKOMO 800mm x 10m, 1200mm x 6m, 1000mm x 31m, and 1400mm x 32m. Gjdpewcyh Hofx Aivjkc

Condition: used, Year of construction: 1990, -1- used drive roller/deflection roller, drum length approx. 750 mm, drum diameter approx. 400 mm, with 20 kW Stiebel (5042.04.00301.05) gearbox, year not known to us. Price EXW Godpfxowqfzhj Aivokc

Condition: used, SECOND-HAND SUBFILTERING EXTRACTION PLANT COLLAVINI - USED - Fan motor 7.5 kw - 64 filter clothes - Clothes diameter 200 mm - Clothes length 1700 mm - Estimated max. filtering capacity 10.000 m3/h (current fan approx. 6000 m3/h - Vibrating filter bag cleaning system Gsdowra Npjpfx Aivokc - Year 2008 - CE rules N.B. the discharge instead of clothes or screw conveyor has been adapted to feed a briquetting machine

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF:  MM6319 Bread plant comprising of: 1 x Damak conical rounder for pieces from 100g to 600g. Manufacturer - Damak Makina. Model - DM CR 2000. Date of manufacture - 2021. Capacity - 1200 to 2400 pieces/hour. Electrical requirements - 415 V / 50 hz / 3 phase. 1 x Damak 176 pocket intermediate proofer with adjustable timings for dough resting. Manufacturer - Damak Makina. Model - DM IP 176.  Date of manufacture - 2021. Input height - 800mm. Output height - 1550mm. Fitted with removeable pockets for ease of cleaning. Gkedsx E Aznepfx Aivjc 1 x Bertuetti 4 x roller dough moulder for pieces up to 1500g. Manufacturer - Bertuetti. Model - SIMPLEX. Came out of production in November 2025 and in good working condition.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical specifications: Operating voltage: 400V AC, 3PH/PE Frequency: 50Hz Connected load: 110kVA Main supply fuse: 200A Godoxzuc Hjpfx Aivokc Production capacity: depending on material to be processed, 20m/min / 6" core up to max. 830mm diameter / up to 1.4t Degree of automation: fully automatic Installation dimensions: 5.2x3.7x3.2m (LxWxH)

Condition: used, functionality: unexamined, Year of construction: 1979, Various used housing parts for SBM-Vöest 10/6/4 Export Godpfxoxv U S Re Aivekc

Year of construction: 2022, operating hours: 6 h, condition: like new (used), functionality: fully functional, 3 pieces of nearly new PROLAIN dryers, each approx. 170 m³. Further technical data available on request. Sale on behalf of customer. Gksdpfxsxcifre Aivec

Condition: used, Year of construction: 2000, functionality: fully functional, feed rate X-axis: 40 m/min, works good! Gksdpfxeymtikj Aivsc

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Further details on the technical specifications and configuration of the system can be found in the attached documentation. TECHNICAL DETAILS Inlet Conditions Design flow rate: 40,000 Nm³/h Temperature: 25 °C Relative humidity: 50% Pollutants V.O.C. inlet concentration: max. 305 mg/Nm³ Average LHV: 7,500 kcal/kg Dust: < 3 mg/Nm³ Gkedpfxoyz Rf Ts Aivec Discharge Conditions after RC System Volume flow: max. 40,150 Nm³/h Temperature: 30 - 50 °C TOC concentration: max. 20 mgC/Nm³ Filtration Unit Air volume flow: max. 44,000 m³/h Operating temperature: 20 °C Rotary Concentrator Number of sectors: 3 Adsorbing active material: Zeolite Process volume flow: max. 41,000 Nm³/h Pollutant inlet concentration: max. 305 mg/Nm³ Process temperature: 20 °C Adsorption air volume flow: max. 38,950 Nm³/h Purge air volume flow: max. 2,050 Nm³/h Desorption air volume flow: max. 2,050 Nm³/h Desorption outlet concentration: max. 5,700 mg/Nm³ Blower BL-01 Air volume flow: max. 4,300 Nm³/h Operating temperature: 60 °C Static pressure: 5,900 Pa Total pressure: 6,290 Pa Power consumption: max. 12.8 kW Installed power: 18.5 kW Sound pressure level at 1.5 m distance: max. 89 dB(A) Blower BL-101 Air volume flow: max. 36,700 Nm³/h Operating temperature: 35 °C Static pressure: 2,400 Pa Total pressure: 2,620 Pa Power consumption: max. 38.4 kW Installed power: 55 kW Sound pressure level at 1.5 m distance: max. 84 dB(A) Blower BL-02 Air volume flow: max. 135 Nm³/h Operating temperature: 30 °C Static pressure: 5,000 Pa Total pressure: 5,050 Pa Power consumption: max. 0.4 kW Installed power: 2.2 kW Sound pressure level at 1.5 m distance: max. 70 dB(A) EQUIPMENT Documentation/manual included Note: The system has already been dismantled.

Condition: used, Year of construction: 2006, operating hours: 71,000 h, functionality: fully functional, MTU 16V 4000 GS L61 gas generator. Year of manufacture: 2006. Operating hours: 71,000. Voltage: 10,000 V. Delivery includes: * genset on skid * gas train control panel * pump unit * documentation and logbook. In fully operational condition. Gkedpfx Aisy At Awsvjc

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional Gkedpfxef Nkv Ss Aivoc N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Godsw Uf Ihspfx Aivskc Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: like new (used), Year of construction: 2021, overall weight: 2,300 kg, The machine offered is only available for rental!!! Prices: Daily rate from €280.00 Godpjwtq Rtsfx Aivskc Weekly from €1,000.00 Prices exclude VAT

Condition: used, Year of construction: 2001, Konig Rex Futura bun roll line T6 S-MKB/1- SK58 Konig Rex Futura 6/5/4-row headmachine SK58 Gedpfx Aioxvqv Eovekc year of build 2001 weight range 35-85 gram cap. 9000 pcs/h with Lippelt moulding and setting device year of build 2005 pictures BEFORE reconditioning

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Gedpeziy U Defx Aivskc Capacity: 1200 kg/h Features: 6-roll mill; conditioning screw; water treatment

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Gkedozizq Tspfx Aivec Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Condition: used, CIP system comprising a total of 7 tanks, of which: - 1 tank with a capacity of 60 hl, used as a buffer water tank - 5 tanks, each with a capacity of 30 hl (built in 1992), for acid, buffer water, Desi and 2 x lye - 1 tank with a capacity of 20 hl (built in 1992) for fresh water Other system components: - 2 centrifugal pumps - Heat exchanger - Conductivity measurement - Various pipework and valves Additional title: 7-tank CIP system with pumps and heat exchanger Volume stacked water tank: 6000 l Volume 5 x tanks for cleaning solutions: 3000 l Volume fresh water tank: 2000 l Material: stainless steel Gkedpfx Aiezi Anaevoc Position: vertical vessels each on 3 feet Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 2 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) Gkodpfxjzg Dx Ue Aivec - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 2026, condition: new, functionality: fully functional, log sorting line with 10 pockets, 5 on each side. processes logs with diameters of 5-200 mm and lengths of 1.5-4.2 m. consists of: Gkodpfxszn Awfs Aivsc 1. accumulation conveyor, 12 m long. 2. separator. 3. receiving conveyor, 6 m long. 4. scanner conveyor, 9 m long. 5. 10 sorting pockets. total length: 28 m. the cost of electrical connection with Siemens components is not included in the equipment price; estimated at 30,000 EUR.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. Gkedpfx Aiozmyvijvoc • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.