Used Romer Kabina Do Malowania Proszkowego for sale (6,066)

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Kdedpfxsfz Dq As Ampok Paint container

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Kdodpfx Amefz Dttopsk Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Kedsfz I Npjpfx Ampsdk Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Kjdofz I Srjpfx Ampjdk Strongly basic anion exchanger working in the chloride cycle, Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Kdsdefz Nb Topfx Ampok - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol Kjdpfx Amefz U Swspedk • Programmable powder suction valve to keep the powder center clean

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. Kjdpfxjfz U S Ej Ampsdk The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events Kdedpfx Asfz U Tiompjk You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Kedpfx Aeflrc Sempedk - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), fuel type: diesel, color: black, operation weight: 500 kg, maximum load weight: 800 kg, lifting height: 3,800 mm, axle configuration: 2 axles, Year of construction: 2024, machine/vehicle number: WD1-800, WD1-800 Twin Shaft Mixer with Unloading – Leg Height 3800 mm Remote Control --- Technical Data: Model: WD1-800 Twin Shaft Mixer Batch Volume: 500 L Capacity: 800 L Efficiency: 25 m³/h Aggregate Size: 60–80 mm Paw Rotation Speed: 26 rpm Number of Mixing Paddles: 2 × 7 Mixing Motor Power: 18.5 kW Kdjdjv H D S Ejpfx Ampok Winch Motor Power: 5.5 kW Water Pump Power: 1.1 kW Basket Lifting Speed: 18 m/min Unloading Height: 3800 mm Dimensions: 4900 × 2900 × 4200 mm --- Equipment: Mixer reducer Mixing motor Winch reducer Winch motor Lubricating system - oil pump Water pump Internal coating Pneumatic discharge Frame Supporting structure - steel legs Unloading basket Platform Lifting track Handrail Ladder

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ Kdedpfx Aev Rpx Ssmpek • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7525-3833-FA, measuring range X-axis: 2,500 mm, With software PC-DMIS2021.2 Calibrated by Hexagon in 2023. Price ex site, packing and insurance are not included.Without guarantee. Kdsdpsuhyqhjfx Ampsk

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2004, loading space length: 13,500 mm, loading space width: 2,490 mm, loading space height: 2,620 mm, total length: 13,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65/22.5, wheelbase: 9,310 mm, color: red, Year of construction: 2004, Equipment: ABS, Axle configuration Tyre size: 385/65/22.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 8,330 kg Payload: 31,170 kg Kdodpfxjw S Hp Ue Ampok Gross vehicle weight: 39,500 kg Condition Technical condition: good Visual condition: good Further Information Please contact Bas Wolfs or Bas Wolfs for more information.

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12087, COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS Kdsdjn Awndepfx Ampok Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

Condition: used, machine/vehicle number: XL9D027CX3A006077, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2004, total width: 2,500 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 8,790 mm, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.550 kg Carrying capacity: 36.450 kg GVW: 42.000 kg Kdjdpjyx A Nlsfx Ampjk Identification Registration number: OH-85-LN

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture Kjdsyyyv Eopfx Ampedk – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW Kdedpfx Ameyy I Ayspok 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table Kdodpeyz Sfbofx Ampok - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7894 TECHNICAL DATA - Min / max working width: 20 / 165 mm - Min / max working height: 8 / 100 mm 4 spindles: 1) Lower horizontal, 165 mm, 4 kW 2) Right vertical, 100 mm, 4 kW 3) Left vertical, 100 mm, 4 kW 4) Upper horizontal, 165 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 6 driven, toothed infeed rollers (including 3 double rollers) - 2 driven outfeed rollers, smooth rubber From below: - Side pressure before and after the lower feed roller in the table - Lower infeed toothed, driven, swiveling roller in the table before the first spindle - 2 side pressure units - Driven outfeed roller, metal, smooth - All rollers pneumatically pressed - Length of infeed table: 1770 mm - Table height adjustment up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment - Feed motor: 3 kW - Feed via cardan shafts - Enclosed in cabin - Extraction connection diameter: 4 x 130 mm - Dimensions (LxWxH): 3200 x 1700 x 1850 mm - Weight: 2800 kg ADVANTAGES Kdsdpfx Aoykar Tompek – 4-head configuration – Ideal for wet and dry timber – Infeed toothed, driven, swiveling roller in the lower table before the first spindle – Original DTR technical documentation + CE – Used machine, excellent condition Net price: 49,900 PLN Net price: 11,880 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7567 TECHNICAL SPECIFICATIONS - Automatic strip feeding - 2 pneumatic clamps - Aggregate angle adjustment - Pneumatic spindle movement - Simultaneous machining of 2 sections - Groove depth up to 25mm - Support rails - Oscillating drill movement adjustment - Feed stroke adjustment - Automatic stop - Inclination from 90 degrees (vertical) to 0 degrees (horizontal) - Main motor 1.1kW - Oscillation motor 0.75kW Kdjdpsyg Iydofx Ampek - Working pressure 6-8 bar - Dimensions (L/W/H) 4020x1150x1400mm - Weight approx. 480kg ADVANTAGES – For window production – Oscillation – Pneumatic clamps – Not painted – Italian made – Used machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may change with major fluctuations)

Condition: good (used), axle configuration: 2 axles, first registration: 11/1979, suspension: steel, color: orange, Year of construction: 1979, Make axles: ROR Ksdpfxjyl Udys Ampodk Brakes: drum brakes Empty weight: 3.680 kg Carrying capacity: 27.820 kg GVW: 31.500 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Leaf spring suspension

Condition: used, machine/vehicle number: XL9D027CX3B006077, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2004, total length: 11,070 mm, total width: 2,510 mm, wheelbase: 8,790 mm, color: other, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = Kdedpjyuf Arsfx Ampek - Air Suspension - BPW Axles - Drum brakes = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 5.580 kg Carrying capacity: 36.420 kg GVW: 42.000 kg Registration number: OH-53-LR

Condition: good (used), Code: 0201 Kdsdpsq Ehrvefx Ampsk Brand: SACOT Model: TR DO PL MO7 - Norme CE 90° automatic transfer of workpieces back to the operator, applicable to various processing machines, also for metal, plastic or leather processing - CE Standard - Year 2008 Technical data: Max panel width 1300 mm Panel feed via motorised belt Wheels for movement Overall dimensions mm 4100 x 2200 x 2700 h Overall dimensions for transport: mm 4100 x 2200 x 1000 h - kg 1200 + pallet mm 1800 x 1200 x 1000 h - kg 400

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation Ksdpsw Humljfx Ampjdk • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: good (used), Size: max 460 x 315 mm Size trimmed: max 430 x 300 mm min 80 x 50 mm False opening: max 140 mm Feeding height: max 120 mm Speed: max 1.500 c/h Power requirements: 3 kW (220/380V, 50Hz) Motor: max 220/380 V Motor: 50 Hz Width: 2.050 mm Depth: 2.220 mm Height: 1.615 mm Weight: 2.550 kg (approx.) Equipment: automatic infeed with integrated counter stacker Kjded S Svbjpfx Ampedk • 1 set of clamp plates & plate holders • 1 set cutting table extension • 1 set cutting table plates • 3 sets of cutting sticks • 2 sets of knives • 1 set of operator manuals • 1 spare part catalogue • standard equipment • 1 set of electrical diagrams • 1 set of standard tools