Used Robatech Glue Spreader for sale (1,553)

Year of construction: 2022, condition: excellent (used), Crane spreader beam, Wewira, 3 tons - second-hand : Price ex location: 6.500.-€ (net)! Manufacturer: Wewira Type: Equalizing spreader beam Dcodpfx Aaeq Tqm Te Hol Year of construction: 2022 6.000mm 6 hooks Load capacity: 3.000kg New price, 7.800.-€ (net) Condition: very good - basically unused! - Classic bad buy! Is currently only a little dusty! Available: immediately Location: 79206 Breisach am Rhein

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder Dcodpfx Aajzf E Hqj Hjl LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: Dsdozf E Dvspfx Aa Hscl - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000/6000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters Dcedpox Uwp Esfx Aa Hel ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Anti-icing and de-icing operations • Highway and municipal street maintenance • Airport runways and taxiways • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.

Condition: new, functionality: fully functional, color: orange, brakes: other, gearing type: mechanical, emission class: none, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, fog lights, hydraulics, low noise, onboard computer, traction control, TICAB Sand & Salt Spreader RPS 1500 | 1.5 m³ – Professional Winter Road Maintenance & De icing Equipment Featuring a 1.5 m³ hopper, hydraulic drive and efficient brush chain feed, this spreader delivers uniform distribution of salt, sand, grit, and other anti skid materials, helping municipalities, contractors and road services maintain safe roads, sidewalks and pavements throughout the cold season. The TICAB RPS 1500 is a high performance sand and salt spreader engineered for winter road maintenance, snow and ice control, anti icing, de icing, and surface safety operations. Key Features Dodpjx Uql Hsfx Aa Hjcl • Spreading width: 3–6 m (varies with disc speed) for broad winter coverage • Disc spreader with adjustable tilt for optimized salt and sand dispersion • Hopper capacity: 1.5 m³ for extended operation without frequent refills • Hydraulic scraper chain feeding system for reliable material delivery • In cab control panel with optional proportional disc speed control • Can be mounted on a trailer or customer truck chassis for versatile use Applications • Winter road de icing & anti icing spreading • Municipal street, highway & urban pavement treatment • Sidewalks, parking lots & industrial surface maintenance • Sand, salt & grit spreading for traffic safety Why Choose TICAB RPS 1500 The TICAB RPS 1500 delivers compact design, high efficiency, and reliable performance — reducing manual labor, improving safety, and increasing productivity during winter road service, de icing, and anti skid applications. It’s a cost effective choice for municipalities, winter service contractors, and road maintenance fleets. Contact us for price, delivery options, and full technical specifications. Get ready for safe winter roads with TICAB!

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from TICAB Manufacturer - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. Dcodsvpp S Nopfx Aa Hsl - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. Djdot N Ty Tepfx Aa Hjcl ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: new, Year of construction: 2026, RPS-1500 Djdpfx Aot Ifxlja Hscl The RPS-1500 self-contained sand-and-salt spreader from TISAV is the ideal piece of equipment for the effective spreading of de-icing materials on roads and pavements, minimising the need for manual labour and significantly reducing the risk of accidents and personal injury. The spreader is fitted with a 1.5 m³ hopper featuring a scraper-chain feed mechanism and a disc for spreading materials. Thanks to its self-contained design and compact dimensions, it can be used with any vehicle. SPECIFICATIONS: • Spreading width, depending on disc speed – 3–6 m • Hydraulically driven mechanisms • Disc tilt adjustment (manual) • Mixture feed mechanism – scraper-chain • Proportional control system for disc rotation speed via the control unit in the driver’s cab (optional) • Equipment controlled via a control panel from the driver’s cab. • Features its own wheelbase, or can be mounted on the customer’s vehicle.

Condition: used, BSA slurry tank Dedpfx Aaoyg Ea Io Hscl   • 5000 l capacity   • Forced steering   • Equipped with screw pump   • Lighting   • Wide tires   • Ready for immediate use! Condition: Used

Year of construction: 2024, condition: used, New: Yes Cargo space capacity: 5.000 l Dcsdswdpulepfx Aa Hol

Condition: used, Fertilizer applicator    • Working width: 5,300 mm Dsdpfxoyhxars Aa Hscl    • Directly from operation. Condition: Used

Year of construction: 2025, condition: used, New: Yes Colour: Grey Cargo space capacity: 10.000 l Dcsdpfx Aowvmkzea Hjl

Condition: used, New: Yes Dodpfxsyaqp Us Aa Hocl Colour: Grey

Condition: used, New: Yes Please contact us for more information. Djdpjyy Hirefx Aa Hecl

Year of construction: 2021, condition: used, New: Yes Dodpfjx Tc Ikjx Aa Hocl Reference number: 5

Condition: used, New: Yes Dsdex Tgb Iopfx Aa Hscl Working width: 750 cm

Year of construction: 2024, condition: used, New: Yes Carrying capacity: 5.000 kg Dimensions of cargo space: 375 x 175 x 50 cm Dcsdpjwf S Epefx Aa Hol Cargo space capacity: 3.280 l Tyre size on axle 1: 10/75-15.3 Tyre size on axle rear: 10/75-15.3

Year of construction: 2023, condition: used, New: Yes Colour: Red Carrying capacity: 8.000 kg Dedpfex S N Smsx Aa Hscl Dimensions (LxW): 450 x 200 cm

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Dsdpfxjvx H Duj Aa Hjcl

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for profile strips and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, minimum internal radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable 4 – 9 m/min, 2.6 kW, 400 Volt. Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers. Dodpfsvf H I Tjx Aa Hecl

Year of construction: 2012, condition: used, Attachment suited for: Loading and unloading machines Please contact Sales Team for more information Dodpfx Ajydmzusa Hocl

Year of construction: 2012, condition: used, Attachment suited for: Loading and unloading machines Dodpfsydmzzox Aa Hscl Please contact Sales Team for more information

Condition: used, Year of construction: 2015, operating hours: 9,319 h, lifting height: 4,900 mm, fuel type: electric, mast type: triplex, battery manufacturer: Emrol, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,600 mm, color: other, Weights Empty weight: 3.600 kg Dcedpfx Aov D Ernea Hol Functional Lifting capacity: 2.000 kg Maximum passing height: 212 cm Number of valves: 3 Condition General condition: average Technical condition: average Visual appearance: average Other information EPA Marked: yes Fork carriage: Fork spreading Additional information Please contact Bas Sindorf for more information

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Dcjdpfxjy Avqde Aa Hol Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. Dsdpfsy Alcijx Aa Hjcl The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size