Used Musterfirma Wand 1000/2000 for sale (15,241)

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Dodpfxjvptt Re Aa Iewc Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication - Drying by blower, five nozzles - Conveyors and collection table

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Dwsdjvm D Umepfx Aa Iec Technical Details  - Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) - Formats: - crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise - crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise - crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise - crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise - Horizontal and vertical spray nozzles - Spraying with hot caustic and fresh water - Caustic heater with temperature regulation is integrated in the machine - Machine is heated by steam - Dimensions: - Length: 4800mm - Width: 900mm - Height: 1400mm - Weight: 1800kg - Sieves for removal of dirt - Incl. documentation - Incl. spare parts list - Incl. Electrical diagram

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Dwjdpfx Aajn S A R Se Iec

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Dedsw Hl Adspfx Aa Ijwc Weight: 70 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, UV dryer, Cefla UV 2000 Dwodpfoxn Nlvjx Aa Isc - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight-mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5 % Images are examples of a machine of the same design*

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) Dwodpswh U Avsfx Aa Ioc - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Djdpfeyiamrex Aa Iewc Key Features - Equipment Type: Barrel support cradles / sleepers for wineries - Design: V-shaped structure for secure barrel positioning - Barrel Capacity: 2 barrels per support - Compatible Barrel Sizes: 225 to 700 liters - Manufacturing Process: Robotic MAG continuous wire welding - Structural Strength: High resistance to load, handling, and mechanical stress - Surface Finish: Oven-cured polyester powder coating - Compatibility: Suitable for automated barrel washing systems - Application: Wine cellar barrel storage and handling - Quantity: 488 units Dimensions (Standard 225 L Barrel Support) - Length: 1,430 mm - Width: 610 mm - Height: 364 mm

Condition: new, Year of construction: 2026, machine/vehicle number: 20260318020, fuel type: diesel, motor manufacturer: Baudouin 8M33G1000/5, General information Field of application: Construction Weights Empty weight: 9.040 kg Functional Generator capacity: 1.000 kVA Dimensions of cargo space: 546 x 220 x 253 cm CE mark: yes Other information Fuel consumption: 143.7 Liter per Hour at 75% Load Generator: CJ634D Frequency: 50 Dwodpjzyk T Eofx Aa Ioc Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1250 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Dwedpfozy Uvkex Aa Ijc Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop Dwjdpozzrflsfx Aa Ijc - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper DIN 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1220 kg range L-W-H 2070 x 900 x 1600 mm Dwedpfx Aaoxaavvo Ijc Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Shell Tellus 46 - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip back wall - Operating tools - Operating instructions

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table Dwsdjxabf Eopfx Aa Isc - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Design: Single-acting Dwedpscv Sivofx Aa Iec -Piston diameter: approx. 165 mm -Piston rod: Ø 140 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1670 mm -Piston rod mounting: Ø 80 mm -Cylinder mounting: Ø 80 mm Quantity: 1 piece available -Dimensions: 1850/270/H220 mm -Weight: 318 kg

Condition: new, Year of construction: 2026, faceplate diameter 2000 mm swing diameter 2500 mm turning height 1600 mm control Fanuc 0i-D stroke of vertical slide 1000 mm Dwedpfx Aaezzd Ryj Ijc tool holder 1 distance face plate/tool carrier 1075 - 1875 mm vertical adjustment of the crossrail 800 mm workpiece weight 13 t faceplate turning speed range -stepless- 1 - 200 U/min feeds mm/min rapid traverse 10/12 m/min weight of the machine ca. 42 t This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH (Price without live tooling). Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.

Condition: used, Year of construction: 1997, total height: 2,900 mm, total length: 4,000 mm, total width: 2,400 mm, Colour: White Empty weight: 10.000 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Heidenhain - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 Dedey Uwawepfx Aa Iewc - Z-axis travel [mm]: 750 - Table length [mm]: 1150 - Table width [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 - Options: Tool measurement system - Transport dimensions: 4000mm x 2400mm x 2900mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm dayligth 410 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools Dwsdsxzuwkspfx Aa Ioc * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

Condition: new, turning length 2000 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25.0 - 1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm quill: 5 MK spindle bore 105 mm spindle taper DIN 55029 D 1-8 engine output 7.5 kW weight of the machine ca. 2720 kg range L-W-H 3340 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display Dwjdpfx Aoxabtpea Ijc - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Working width: 1500mm Working length: 2160mm Max. thickness: 2mm With Supply-station infeed. Dwsdpfx Aaozrd Iaj Isc - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Drive system: CNC - Power [kW]: 18.0 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 1500 - Options: Loading system - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 516,000 km, power: 300 kW (407.89 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 6,100 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 8,150 mm, loading space width: 2,660 mm, loading space height: 2,500 mm, Year of construction: 2018, Equipment: air conditioning, cruise control, parking heater, tail-lift, Year of manufacture: 2018 Front axle: Max. axle load: 8000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Number of cylinders: 6 Engine capacity: 10.837 cc Empty weight: 10.870 kg Carrying capacity: 9.630 kg GVW: 20.500 kg Tail lift: Dhollandia, tail lift, 1998 kg = Additional options and accessories = Dsdjzy I E Sspfx Aa Ijwc - Airbag - Aluminium fuel tank - Climate control - Heated driver's seat - Parking air conditioning / roof air conditioning - Reversing camera - Suspension seat - Vehicle heater

Condition: new, turning length 1000 mm turning diameter 420 mm Dwsdpfexaakyjx Aa Ijc swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 30-550 / 550-3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 5.5 kW weight of the machine ca. 1145 kg. range L-W-H 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2x centering tips - Chip back wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 400 mm turning dia. in gap 560 mm spindle bore 52,0 mm turning speeds 45 - 2.000 U/min bed width 210 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 100 mm total power requirement 2,0 / 2,4 kW weight of the machine ca. 810 kg. range L-W-H 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE Dsdpfx Aaexaau Ss Iowc - Motor with magnetic brake according to CE standard - Operating tool

Condition: new, 15000 kg height 790 - 1350 mm width 2000 mm ja Dwsdel Sva Dspfx Aa Ioc 120 x 2000 mm

Condition: excellent (used), functionality: fully functional, Manufacturer: Šmeral Type of machine: Hot forging press Dwodozxhzwepfx Aa Iec Rated pressing force: 1,000 t Ram stroke: 220 mm Stroke rate: 100 strokes/min Table size: 995 × 950 mm Ram adjustment: 10 mm Stroke of upper ejector: 35 mm Drive power: 40 kW Weight: approx. 45 t

Condition: used, Year of construction: 2013, Manufacturer : OLSA Model : Fusore CP 1000 Year : 2013 Type : Melter Vessel : Total volume: 1,130 L Operating temperature: −10 to +95 °C Pale anchor-type agitator + scrapers Bottom-mounted dissolver Number of scrapers: 3 Pressure: atmospheric Jacketed : Volume : 55 L Operating temperature: −10 to +95 °C Pressure : 0 - 4 bars Atmospheric pressure Skid: CIAT plate heat exchanger + pump: Dwodpfxjzxifqe Aa Ijc Year : 2013 Model : PWB8 11 025H00 Min./max. permissible temperature (TS): 0 / 110 °C Min./max. permissible pressure (PS): 0 / 10 bar Test max. pressure (PT): 15 bar Electrical cabinet with PLC + HMI Technical Data available  

Condition: used, Year of construction: 2000, Overview This filling monoblock was manufactured in 2000 by Germany MAG Schymanski. The machine is designed for the hot filling of juice and non-carbonated beverages. The system is equipped with 28 filling valves and 4 capping heads. The machine is already dismantled and stored. Dsdpozd S Ixjfx Aa Iswc Technical data - Capacity: approx. 3,500 – 6,000 bottles/hour - Formats: 0.5 L / 0.7 L / 1.0 L / 1.5 L - Application: Hot filling of juice and non-carbonated beverages - Configuration: 28 filling valves / 4 capping heads