Used Mono Vs2 With Divider And Moulding Machine for sale (69,469)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Iaedpeg Ailcefx Amieu Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Iajdpfeyw Svfjx Amieu

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, Profile sander FLADDER 300/L.S.4 Year of manufacture: 1996 Isdpfxoyrqzbo Amioau

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Iaedjx Hz I Njpfx Amiju Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Weight: 925 kg Dimensions (L x W x H): 340 x 100 x 160 cm 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Spindle diameter 40 mm Iaodpfx Amjyuw Rnoiou

Condition: ready for operation (used), Year of construction: 2006, operating hours: 58,670 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, displacement volume: 318 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22,4 Iasdeydp Idspfx Amiju Injection pressure 2336 bar Stroke volume 318 ccm Shot weight (PS) 289 gr. Injection rate 143 ccm/s Screw speed 265 1/min Plasticising rate max. 29,3 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90 ° Additional Options: - 1 x Air valve - 2 x hydr. core pulls - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Iasdpfxsydp D Ej Amieu Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: - 1 x Air valve - 2 x core pull - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Iajdpex Hzzcsfx Amieu Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: used, Year of construction: 2007, operating hours: 68,000 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Clamping force 600 kN Mould opening stroke 335 mm Hydraulic ejector - stroke 105 mm Ejector force 19,1 kN Iaedpfjx Hxb Hex Amiju Injection unit: Screw diameter 35 mm Injection pressure 1581 bar Stroke volume 154 ccm Shot weight (PS) 139 gr. Injection rate 151 ccm/s Screw speed 400 1/min Nozzle pressure 50,3 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Dimensions and weights: Dimensions of the machine ca. 3,00 x 2,00 x 3,20 m Total machine weight 6800 kg Accessories: - Anti vibration pads - Antivibration pads - 4-fold water flower

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ijdpfx Aeylz Aiemisau

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. Ijdjyq Rkyepfx Amieau The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 878 40013, clamping force: 2,500 kN, Fully operational machine. Numerous wear parts have been replaced recently. Iajdpfxjxtmp No Amieu

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! Iaodpfxey Exdxj Amieu TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

Condition: reconditioned (used), Fortuna bun press/dough divider Gr.3, from 35 g to 85 grams. The machine has been overhauled and newly painted. Comes with 3 moulding plates. 4x16 A connection. The machine works perfectly and can be put into operation immediately. If you have any further questions, please contact us. Thank you very much. Iaedpjc Utkajfx Amiju

Year of construction: 2012, condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Iodpfx Amst E Tq Rsisau

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Isdjuiykdspfx Amioau

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Isdjwkiicjpfx Amisau

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Ijdpfx Aew Rqwtemisau

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Iaodpfxoyddy Uo Amiou

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Iedpfsygw Sijx Amisau

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Isdpfx Aox E Ac Eemioau

Condition: ready for operation (used), Year of construction: 1993, Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mold installation height min./max.: 225mm/not specified, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On-site inspection is possible. Individual sale possible. Iedjx Hz Sbepfx Amisau

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Iajdpfx Amjv Extzeisu

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Ijdpotyaypofx Amisau

Year of construction: 1995, condition: ready for operation (used), A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible. Iodpowut Htjfx Amijau