Used Mist Blower for sale (1,830)

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Ljdpfjwv T R Usx Afkshk Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MRG 2500 4G, total width: 1,980 mm, total length: 5,000 mm, total height: 4,700 mm, operating temperature: 95 °C, AHENA 3 MW-os Aprítékos Acél Kazán Lhodpeua D Twefx Afkek Eladó egy teljesen új AHENA 3 MW teljesítményű acél kazán , amely négy füstjáratos rendszerrel, vízszintes füstcsövekkel és mozgó rácsos automatikus betáplálással rendelkezik. Ideális szilárd tüzelőanyagok, például fakéreg, faapríték és faforgács felhasználására. Ez a kazán kiváló választás nagy hatékonyságú és környezetbarát működéshez. Magyarországon, Cegléden található.

Condition: good (used), Motor: 1.5 kW Quantity: 2 units Lsdpfx Afehc Sypskjhk Price/unit

Condition: used, Van Aerzen blower GMA 10.0, 1.77 m3/min GLA 10.0, 3 m3/min Lhjdpfxezcfd Eo Afksk GM3S, 2.82 m3/min See our other listings VMA Wekerom

Condition: used, Year of construction: 2010, volume flow: 1,500 m³/h, suction capacity: 1,500 m³/h, Hönag Type 1500 Filter, Extraction, Air Filter, Emulsion Mist Separator Used, as shown in the pictures From stock (may show signs of storage) For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Information about bank details, payment terms, etc., will be sent by email. Lodpfx Afozkax Eokjhk W117

Condition: used, volume flow: 1,250 m³/h, suction capacity: 1,250 m³/h, Büchel ENF1250 Extraction System, Air Filter, CNC Machine, Emulsion Mist Separator Used, as shown in the pictures. From warehouse stock (may show signs of storage). For further technical information, please refer to the pictures. Scope of supply: as shown in the picture. With invoice. Lsdpfxszkak Uo Afkehk The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Information regarding bank details, payment terms, etc., will be sent to you by email. W117

Condition: like new (used), Aerzen GM25S Biogas blower. Lhedpfxezp H Nnj Afkjk

Condition: excellent (used), Year of construction: 2015, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Z000071400101, total width: 1,400 mm, total length: 2,050 mm, total height: 2,150 mm, type of input current: three-phase, overall weight: 1,100 kg, Powerful industrial blower suitable for a variety of applications. The stationary fan with a 600 mm diameter can be used for cooling, ventilation, heat dissipation, or for displacing water mist and dust. The unit has four rollers and forklift pockets for loading. Electric motor power (blower): 15 kW Air flow rate: 33,000 m³/h Speed: 13.8 kW / 1470 rpm Electrical connection: 400 volts / 50 Hz / 32 amps Cable length: 5.0 m Pickup and inspection available in D-89188 Merklingen. Ljdpfxowbfm Se Afkjhk

Condition: ready for operation (used), Dust and mist extractor DeWalt model DW60 Lsdpjxdwn Dsfx Afkshk

Condition: like new (used), functionality: fully functional, The LANCO side channel blower is for sale. Mounting plate dimensions: 260 mm x 115 mm Lodpfx Afsv T Uzkskehk 220 mbar 210 m3/h RPM 2850 1.5 kW

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 0.51 kW (0.69 HP), overall weight: 45 kg, total width: 740 mm, total length: 500 mm, total height: 1,300 mm, type of input current: AC, input voltage: 230 V, volume flow: 14,000 m³/h, Rex Nordic Air Cooler REX 14000 REX14000 is our most compact, cost-effective, and energy-efficient air cooler. The cooler generates 14,000 m³/h of cooled and purified air to improve comfort for people, livestock, or premises in general. This means it cools an area of approximately 175 m². The REX14000 features an effective, integrated UVC light that kills potential germs and viruses. It has low power consumption (510W), filters and refreshes the air, and has louvers for effective distribution of the airflow, making it perfect for cooling large indoor spaces. This means powerful and environmentally friendly cooling for less than €2 per day. Easy to set up, operate, and maintain. Simply add water and enjoy cooling. The advantage of the cooler is that power is only consumed by the fan and a water pump. The actual cooling is achieved through natural evaporation. Lhedszc D Hxjpfx Afkok Technical specifications: Area coverage ≤ 120 m² Airflow 14,000 m³/h Water tank 60 l Speed (max.) 1,380 rpm (Variable) Voltage 230 V, 50 Hz Power consumption (max.) 510 W Weight 45 kg Dimensions (W x D x H) 74 × 50 × 130 cm The air cooler is a demonstration unit with minor signs of use. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is, of course, also possible. The item will be shipped by freight carrier - shipping costs within Germany are €99. If you have any questions, please do not hesitate to contact us.

Year of construction: 1993, condition: used, 1x Used Aerzen GMA 11.4 Lhodpex N T Ugefx Afkok Motor power: 15 kW

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Lhedpfxjyy Uzce Afkek

Condition: new, For sale: professional centrifugal fan/blower from the renowned German manufacturer Elektror Karl W. Müller. Ledsyuqr Eepfx Afkshk The device is in unused, storage condition, featuring a robust industrial design suitable for ventilation and dedusting systems. Fan is used in: • Dedusting installations • Extraction systems • Ventilation systems • Wood and metalworking industries • Air transport systems Technical data • Manufacturer: Elektror • Model: 2D 07 • Power: 4.5 kW • Voltage: 400 V / 50 Hz • Speed: 2930 rpm • Capacity: approx. 94 m³/min (5,640 m³/h) • Pressure: approx. 1.2 kPa

Condition: used, Year of construction: 2026, functionality: fully functional, The CORMAK FM230DBK Dust Collector is a professional dust extraction unit designed for the efficient removal of sawdust, wood chips, and dust generated during the machining of wood, metal, and plastics. With its compact design, high suction pressure, and 1,000 m³/h airflow capacity, it is an ideal solution for woodworking shops, technical schools, and craft workshops. Its lightweight construction, quiet operation, and excellent mobility make it a practical and efficient dust collector for users seeking reliable performance in a compact package. Key Features 1,000 m³/h airflow capacity – efficiently removes sawdust, chips, and dust from a single workstation. 0.75 kW motor powered by 230 V – operates from a standard mains outlet without requiring electrical modifications. Ø230 mm metal impeller – dynamically balanced for smooth, quiet operation and long service life. Vacuum pressure up to 1,030 Pa – delivers powerful suction, even when handling heavy or damp wood chips. Adjustable Ø100 mm extraction inlet – compatible with a wide range of woodworking and industrial machines. Mobile wheeled base – allows the unit to be moved easily between workstations. 56 L collection bag – reduces the frequency of emptying and supports uninterrupted operation. Low noise level (approx. 70 dB) – provides comfortable operation in enclosed workshop environments. Construction and Technology The CORMAK FM230DBK woodworking dust collector is built around a proven impeller-based extraction system. Its 230 mm dynamically balanced metal fan operates at high speed to generate stable suction, ensuring efficient removal of dust and chips directly from woodworking machinery. The 56 L textile collection bag is mounted on a sturdy steel frame for quick removal and replacement, helping maintain continuous productivity. The entire unit is installed on a mobile base with four wheels, making it easy to reposition even in confined workshop spaces. The adjustable Ø100 mm extraction inlet allows simple connection to a variety of machines with different dust extraction configurations. Ledpfx Aozpxz Aofkohk Performance and Efficiency The FM230DBK combines powerful extraction performance with quiet, energy-efficient operation. Its large-diameter metal impeller and high static pressure significantly reduce the risk of clogging, while the 1,030 Pa vacuum pressure effectively captures heavier particles and larger wood chips. Thanks to its relatively low operating noise, the unit is well suited for enclosed workshops where maintaining a comfortable working environment is important. Standard Equipment Mobile wheeled base Heavy-duty steel support frame Flexible extraction hose with nozzle 56 L textile collection bag Adjustable Ø100 mm extraction inlet Optional Equipment High-efficiency filter bags Multi-point extraction manifolds Antistatic Ø100 mm flexible hoses Reducers and adapters for non-standard machine connections Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,030 Pa Impeller diameter Ø230 mm Extraction inlet diameter Ø100 mm Collection bag capacity 56 L Noise level Approx. 70 dB Overall dimensions 1,100 × 500 × 1,300 mm Weight 21 kg IMPORTANT NOTICE: This machine is a customer return. It is used and fully operational. NO WARRANTY. NO RETURNS.

Year of construction: 2017, condition: excellent (used), AERZEN GM50 blower unit + 90kW motor Ledpfoy Twbxsx Afkjhk AERZEN GM50L blower, serial no. 1546345, 89.90 kW, 55.16 m3/min, year 2015, 340 kg. SIEMENS motor, type 1LC4 283-2AB60-Z, 90kW, serial no. 034052502IM B3, 2975 rpm, 540 kg.

Condition: good (used), Manufacturer: BOC Edwards / Hibon Type: SNH 822 MA / SF 3.22 PC Electrical Motor: 110KW / 1.476 RPM Lodpfxsxx R Aqo Afkehk

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) Ljdpfx Aozlktpjfkehk -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, Industrial Extraction Fan, SARA UC 2 SD Serie II Industrial Oil Mist and Emulsion Mist Extraction Unit, Used Machine Overall Dimensions Width: 740 mm Depth: 550 mm Height: 720 mm Manufacturer / Distributor H. Sartorius Nachf. GmbH & Co. (Germany) Model SARA UC 2 SD Serie II Technical Specifications Lhsdpfxjzgiaks Afkek Year of Manufacture: 2002 Serial Number: 02-6-338 Power Supply: 3~ 400 V AC / 50 Hz (Three-phase) Rated Current: 1.9 A Power Output: 0.9 kW Motor Speed: 2750 RPM Airflow Capacity: 1000–2000 m³/h

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Lsdoyn Rkuspfx Afkshk Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Model AS.7 Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Lhedpfxezdgawo Afkok Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications.

Condition: used, Oil Mist Extractor, Emulsion Mist Separator, Used Machine Manufacturer: IFS Industriefilter Service GmbH Type: IFM 2000 Lhodpfx Afsyn Rmijkek Overall dimensions: Width: 1170 mm Depth: 700 mm Height: 1100 mm Weight: 136.5 kg Year of manufacture: 1995 Electrical data: 400V, 1.5 kW, 3.2 A Filter size: 605 x 615 mm

Condition: used, Centrifugal fan, 18.5 kW, used machine Overall dimensions: 1680 × 1650 × 1260 mm Lhedeyzypnepfx Afkek Weight: 457 kg Electrical data: 400 V; 18.5 kW; 34 A Calculated air flow rate: 11,800 m³/h Calculated pressure: ~4500 Pa, 3.96 kg/s

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230DBK Dust Collector is a professional dust extraction unit designed for the efficient removal of sawdust, wood chips, and dust generated during the machining of wood, metal, and plastics. With its compact design, high suction pressure, and 1,000 m³/h airflow capacity, it is an ideal solution for woodworking shops, technical schools, and craft workshops. Its lightweight construction, quiet operation, and excellent mobility make it a practical and efficient dust collector for users seeking reliable performance in a compact package. Key Features 1,000 m³/h airflow capacity – efficiently removes sawdust, chips, and dust from a single workstation. 0.75 kW motor powered by 230 V – operates from a standard mains outlet without requiring electrical modifications. Ø230 mm metal impeller – dynamically balanced for smooth, quiet operation and long service life. Vacuum pressure up to 1,030 Pa – delivers powerful suction, even when handling heavy or damp wood chips. Adjustable Ø100 mm extraction inlet – compatible with a wide range of woodworking and industrial machines. Mobile wheeled base – allows the unit to be moved easily between workstations. 56 L collection bag – reduces the frequency of emptying and supports uninterrupted operation. Low noise level (approx. 70 dB) – provides comfortable operation in enclosed workshop environments. Construction and Technology The CORMAK FM230DBK woodworking dust collector is built around a proven impeller-based extraction system. Its 230 mm dynamically balanced metal fan operates at high speed to generate stable suction, ensuring efficient removal of dust and chips directly from woodworking machinery. The 56 L textile collection bag is mounted on a sturdy steel frame for quick removal and replacement, helping maintain continuous productivity. The entire unit is installed on a mobile base with four wheels, making it easy to reposition even in confined workshop spaces. The adjustable Ø100 mm extraction inlet allows simple connection to a variety of machines with different dust extraction configurations. Performance and Efficiency The FM230DBK combines powerful extraction performance with quiet, energy-efficient operation. Its large-diameter metal impeller and high static pressure significantly reduce the risk of clogging, while the 1,030 Pa vacuum pressure effectively captures heavier particles and larger wood chips. Thanks to its relatively low operating noise, the unit is well suited for enclosed workshops where maintaining a comfortable working environment is important. Standard Equipment Mobile wheeled base Heavy-duty steel support frame Flexible extraction hose with nozzle 56 L textile collection bag Lhodjvu Apropfx Afksk Adjustable Ø100 mm extraction inlet Optional Equipment High-efficiency filter bags Multi-point extraction manifolds Antistatic Ø100 mm flexible hoses Reducers and adapters for non-standard machine connections Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,030 Pa Impeller diameter Ø230 mm Extraction inlet diameter Ø100 mm Collection bag capacity 56 L Noise level Approx. 70 dB Overall dimensions 1,100 × 500 × 1,300 mm Weight 21 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace Lhedjvu Ad Aepfx Afkek 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg