Used Metalbud Nowicki Kn-200 for sale (18,079)

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-68251 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Fjdpsl Eck Defx Afkeph

Condition: ready for operation (used), Rexroth MA4 / 200-7101-M inverter, MNR: 1070081513-123 SN, used, normal signs of use, 100% fully functional, delivery scope as per photos. Fpodox Eua Njpfx Afksh

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Fpjdpfxozbxwio Afkoh Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: new, Year of construction: 2025, machine/vehicle number: XPJ00261, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 4.487 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 409 x 142 x 235 cm Fsdpfx Afszc Dwdekjph CE mark: yes Other information Fuel consumption: 43.4 Liter / hour at 100% load Generator: Cat LC5100 Frequency: 50/60 Drill equipment: Tank, Battery, Control Panel Emission level: Stage V / Tier IV final Water tank volume: 822 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: good (used), Year of construction: 2006, Used 4-meter CNC press brake by Bystronic Fjdpfx Ajza U Nrjfkeph Type PR 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1 and Z2 axes Hydraulic upper and lower clamping Hydraulic CNC crowning Includes a set of tools

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2016, total length: 14,010 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,110 mm, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = Fjdpfx Aszc Hybefkeph - Disc brakes - SAF Assen = Remarks = Superstructure Volume: 92 m3 = More information = Axle configuration Tyre size: 385/65 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.300 kg Carrying capacity: 34.700 kg GVW: 42.000 kg Identification Registration number: OP-65-HN

Condition: used, This listing is for the Tecan Infinite 200 Pro Microplate Reader The unit is in full working condition and is ready for immediate use The Tecan Infinite 200 PRO is a multimode microplate reader — a laboratory instrument used to measure the intensity of light in biological and chemical assays placed in microplates (usually with 96, 384, or more wells). It’s widely used in life sciences research, clinical labs and drug discovery for quantitative analysis of samples Typical Uses Laboratories use this type of plate reader to: • Quantify DNA/RNA or protein concentrations • Run immunoassays like ELISA • Perform drug screening assays Fsdpfxjydqmzo Afkoph • Read fluorescence or luminescence signals from reporter gene assays • Monitor cell viability or enzyme activity

Condition: new, new ! all stainless steel safety lid 2 mixing directions (manual or automatic) Fjdpfx Aey Ur Dwefkoph tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, The Laska WW 200 2G automatic meat grinder is a powerful and robust machine designed to meet the highest product quality standards while ensuring optimal hygiene conditions. Industrial grinders from Laska are widely used in the meat processing industry, including poultry and fish processing, for the production of minced meat, sausages, burgers, and other ground products. They are also commonly used in the manufacture of ready meals and are increasingly applied in the production of plant-based and hybrid food products. This high-capacity meat grinder is equipped with a large 200 mm feed opening. Its powerful two-speed grinding motor (55 kW) enables the efficient processing of both fresh and frozen products. The hopper has a generous capacity of approximately 370 litres, allowing for continuous, high-volume production. The machine is ideally suited for processing meat, game, poultry, fish, vegetables, pet food, baby food, plant-based products, and fruit. It is constructed entirely from stainless steel, ensuring durability, easy cleaning, and compliance with strict food industry hygiene standards. Technical Specifications - Production capacity: up to 8,000 kg/h (depending on product type, particle size, feed rate, product temperature, and product quality) - Number of worm speeds: 2 - Cutting plate diameter: 200 mm - Cutting system: Unger - Infeed height: 1,700 mm - Discharge height: 750 mm - Voltage: 400 V (3 + N, 50 Hz) - Power: 60 kW - Weight: 1,530 kg Fpodpfxszcq U Ae Afkoh - Dimensions (W × D × H): 1,650 × 1,850 × 1,700 mm

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Temperature control: HB Therm | Fodey N R U Rspfx Afkoph Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Fedey N R Uqjpfx Afkoph Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: excellent (used), Bezel (28371) Center height 200mm Fedpjlrp Nqefx Afksph diameter 65mm weight 9 kg more data, see picture

Condition: good (used), Brake shoe set, wheel brake, brake kit Manufacturer: Knott, brake drum type unfortunately without type designation -Maximum permissible weight: kg -Bolt circle: Ø 110 mm / M12 Quantity: 7 pieces -Price: per piece -Dimensions: Ø 225 x 85 mm -Weight: 6,6 kg/piece Fedozbryqepfx Afkoph

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Fpodpfxsyb Stqj Afkoh Manufacturer: REIS Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Press force: 200 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 !! mm Ram return force: 6,000 kg Table load capacity: 10,000 kp Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Fpedpoqynq Refx Afkeh Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 150 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,448 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Stacker Fjdpfx Asyn Su Ijfksph Load centre: 600 Mast type: Standard Technical condition: Very good Front tyre type: Polyurethane Front tyre condition: 100% Rear tyre type: Polyurethane Rear tyre condition: 100% Battery voltage: 24V Battery capacity: 225Ah Description: Factory-refurbished used machine from Toyota including new inspection and new certification according to FEM (formerly UVV). Impulse control, initial lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 270 h, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 512 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyres type: polyurethane Front tyres condition: 100% Fpedpfx Aeyv Sl Rofkeh Rear tyres type: polyurethane Rear tyres condition: 100% Battery volts: 26V Battery capacity: 150Ah Battery year: 2018 Description: Factory-refurbished used unit from Toyota including new inspection and new approval according to FEM (formerly UVV). Pulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 360 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,440 mm, fork length: 1,150 mm, empty load weight: 900 kg, total length: 800 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Load center: 600 Mast type: Standard Technical condition: normal Front tire type: Polyurethane Front tire condition: 60 - 80% Rear tire type: Polyurethane Rear tire condition: 60 - 80% Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2022 Description: Thorough cleaning, black paint refresh, new tires/wheels, new inspection, new acceptance test according to FEM Fpodpox Nta Aefx Afkjh Impulse control, initial lift,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,880 h, load capacity: 2,000 kg, lifting height: 1,700 mm, free lift: 76 mm, fuel type: electric, mast type: simplex, construction height: 1,348 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Pedestrian stacker Load centre: 600 mm Mast type: Standard Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 26V Battery capacity: 105Ah Battery year: 2019 Description: Factory-refurbished used unit by Toyota, incl. new inspection and new approval according to FEM (formerly UVV). Pulse control, initial lift, CE certificate, Fpodpfx Asyxtwyefkjh

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor Fedpfx Afjzbignokoph -Manufacturer: RGM-Ruhrgetriebe, geared motor, angle geared motor -Speed: 55 rpm -Type: GC 57/30-SN5 -Voltage: 180/200V 3000rpm -Transmission: Z9 5FRG i= 55 -Shaft: Ø 12 x 30 mm -Quantity: 1x geared motor available -Dimensions: 285/190/H120 mm -Weight: 4.9 kg

Condition: like new (used), Year of construction: 2015, machine/vehicle number: TXLT5096, turning diameter over cross slide: 220 mm, turning length: 454 mm, turning diameter: 340 mm, spindle bore: 51 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 185 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, Equipment: rotational speed infinitely variable, TAKISAWA TCY 200 YL5 LATHE • Type: TAKISAWA TCY 200 YL5 Lathe • Year: 2015 • CNC: FANUC 32iB • Travel: X/Z/Y/A 185/530/30/580 mm • C-axis • Machinable length: 454 mm • Maximum workpiece diameter above the machine bed: 340 mm • Maximum workpiece diameter above the carriage: 220 mm • Bar capacity: 51 mm • Spindle speed: 3200 rpm • Spindle power: 7.5/5.5 kW • Spindle nose: A2-6 • Turret: 12 stations • Live tool speed: 6000 rpm • Live tool power: 3.7/2.2 kW • Digital tailstock Fodpfx Afjzc Edrskjph • Rapid traverse X/Z/Y/A: 20/24/10/20 m/min • Dimensions: 2880 x 1795 x 1700 mm • Weight: 4.1 t • 200 mm diameter chuck with automatic control • Chip conveyor • 11 tool stations • 2 axial turning tool stations • 2 radial turning tool stations • 1 live center • Documentation • Machine available for inspection in ARDENNES.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Fjdpjzc Hipofx Afkoph Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,511 h, load capacity: 20,000 kg, lifting height: 3,300 mm, fuel type: gas, mast type: simplex, construction height: 3,160 mm, fork carriage width: 1,900 mm, fork length: 2,500 mm, empty load weight: 22,100 kg, total length: 3,800 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift - LPG powered Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Cushion Rear tires type: Cushion Fpodpfx Afex A I Rgekjh Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdańsk. Visit our homepage - sago-online. Leasing and financing on favorable terms are always possible. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this MAXEIN DWB 200/500G. P.S.: Our master workshop is specialized in repair, servicing, refurbishment, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale. Sideshift, fork positioner, Fork positioner opening range: 710 / 1,710 mm Heater, full cab,

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 8,324 h, load capacity: 20,000 kg, lifting height: 2,800 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 3,360 mm, fork carriage width: 1,800 mm, fork length: 1,300 mm, empty load weight: 29,210 kg, total length: 3,900 mm, drive type: Treibgas, construction width: 1,850 mm, Compact forklift truck - LPG Load center: 625 mm Fork width: 145 mm Fork thickness: 110 mm Fpodpfxsydr Dzo Afkeh Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Normal Front tires type: Cushion tires Front tires size: 40x20x30 Rear tires type: Cushion tires Rear tires size: 320x600/854 Description: In addition to this Hubtex model, we have around 200 more heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing & financing under attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GKS200. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and special builds for forklifts from 8 tons and up. We are also happy to offer your vehicle for commission sale at our premises. Sideshift, fork positioner, Heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 320 kg, total length: 1,750 mm, drive type: Elektro, construction width: 750 mm, Low lift truck Load center of gravity: 600 Fork width: 185 mm Fork thickness: 60 mm Fpjdpsu Dyw Ajfx Afkjh Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Battery Ah: 160Ah Description: In addition to this Armanni model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this SL PESATORE 200/200 P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Electronic weighing system