Used Metal Technics Polska Mtp 125×3200 Mtp-3212 4-Axis for sale (99,135)

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Crodpfx Aszbb Rrjdhoh

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 50-125/302 G4 centrifugal pump with a KSB electric motor. The pump is a warehouse stock item – it has never been used in an installation. It comes from older warehouse stock, so there may be minor marks on the housing resulting solely from long-term storage. The pump is offered with the original KSB carton and documentation as shown in the photos. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 50-125/302 G4 Identification number: 48817003 VC-No.: 5-927-123534 / 001 Flow rate Q: 20–80 m³/h Head H: 16–10 m Rotational speed: 2900 rpm Year of manufacture: 1995 Net weight: approx. 51 kg Gross weight: approx. 55 kg Motor data: Manufacturer: KSB Type: LS100L Power: 3.0 kW at 50 Hz Rotational speed: 2840–2870 rpm at 50 Hz Voltage: 380 / 420 / 660 V – as per the nameplate Protection class: IP55 Insulation class: F Cedpfxjzvyf Ns Adhorh Operating mode: S1 Motor number: 149610EL022 Condition: NEW / UNUSED – WAREHOUSE STOCK ITEM. The pump has not been used. Any minor marks on the surface are due to storage and the age of the device. The scope of sale is exactly as shown in the photos – pump with motor, original KSB packaging, and available documentation.

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 KM No. 6268540 KM No. 6441936 Cedpozl Dg Njfx Adhsrh R901196471

Condition: used, Technical details: x-travel: 1000 mm Cedpjyfgiujfx Adhorh y-travel: 600 mm z-travel: 650 mm control: Siemens 810D shopMill distance spindle /table: min 130mm / max. 780 mm number of spindle speeds: 10000 U/min. spindle taper:: SK 40 tool changer with: 24 Plätze table-size: 1160 x600 mm interface: ja Weight approx.: 5,45 t Machine YOM in 2007 / only put into operation in 2009! 4th axis Oil mist extractor *

Condition: used, Year of construction: 1998, Technical details: Credsu Ndbpjpfx Adhjh x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 3240 mm Bending capacity, steel: 4.0 mm Bending capacity, stainless steel: 3.0 mm Bending capacity, aluminum: 8.0 mm Control system: DELEM DA65 graphic 2D CNC-controlled: angle, bending radius, and back gauge Bending angle setting: 0 – 150° Upper beam opening: 500 mm Back gauge travel up to 1100 mm, with table extension up to 3000 mm Motor power: 7 kW Dimensions (length x width x height): approx. 5300 x 2350 x 2200 mm Weight: approx. 7.5 tons Accessories: Credpfx Adoz I Ekxoheh various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2022, condition: ready for operation (used), overall weight: 8,500 kg, total height: 1,950 mm, This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Additional equipment • Teach-In NC control for automated bending processes (optional) • Mechanical auxiliary arm for handling heavy workpieces (optional) • Hydraulic side supports for stabilizing long sheets (optional) • Infinitely adjustable bending speed (optional) Machine Benefits Qualitative Machine Benefits • Three digital displays for precise adjustment of the roller position • Hydraulic folding plate for easy removal of the finished workpiece • Movable control panel for comfortable operation • Conical bending option • Hydraulic balancing system for the rollers to ensure parallelism • Safety emergency stop system Technical Machine Benefits • Maximum working width: 3050 mm • Upper roller diameter: 300 mm • Rolling speed: 1. 5 – 5 m/min • Minimum bending diameter: 450 / 1500 mm • For steel with 400 n/mm² strength, the machine allows pre-bending of 10/12 mm, full bending of 12/15 mm, and conical bending of 6/7. 5 mm. • For stainless steel (va), the machine allows full bending of 9/11. 2 mm and conical bending of 4. 5/5. 6 mm. Crjdjx D Suljpfx Adhsh • For aluminum, the machine allows full bending of 14. 4/18 mm and conical bending of 7. 2/9 mm. • Heavy, robust welded construction for industrial use • Induction-hardened rollers, suitable for bending stainless steel • Hydraulic drive for the upper roller with planetary gear Extra Information Technical Specifications Maximum working width: 3050 mm Upper roller diameter: 300 mm Rolling speed: 1.5 – 5 m/min Drive motor power: 11 kW Minimum bending diameter: 450 / 1500 mm Bending Capacities Steel (400 N/mm²): Pre-bending: 10 / 12 mm Full bending: 12 / 15 mm Conical bending: 6 / 7.5 mm Stainless steel (VA): Full bending: 9 / 11.2 mm Conical bending: 4.5 / 5.6 mm Aluminum: Full bending: 14.4 / 18 mm Conical bending: 7.2 / 9 mm Dimensions Machine Depth 5400 mm

Year of construction: 2018, operating hours: 3,380 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040950, 4-assige CNC-profielbewerkingsmachine: - Bouwjaar 2018 - Draaiuren 3.380 uur - Windows 10 operating system - Werklengte 7,6m - Lengtemeetsysteem profielen - Barcodescanner - Toolset Crjdoz Eqpnjpfx Adhoh Machine is werkend te zien, demontage door koper. Per direct beschikbaar.

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 9 pieces -Prism width: 100 mm -Dimensions: 9x 240/125/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 240/250/H190 mm Cjdpju T Tqrofx Adhorh -Total weight: 83.1 kg

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, practically factory-new condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical data: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Year of manufacture: 2012 Mat.-No.: 01216137 Number: 9972270914 000100 01 CE marking Motor data: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Crjdpfozvyinox Adhoh Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in Czech Republic Condition: NEW / UNUSED / STOCK ITEM The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set being sold is exactly as shown in the pictures.

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm Crodpfxet Etiye Adhoh - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank Cedowncaiopfx Adhorh - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 2012, overall weight: 55 kg, total height: 120 mm, total length: 490 mm, total width: 125 mm, Metal cutting Tooling GRESSEL - Duogrip 125mm Cedpsz Arigofx Adherh MACH-ID 9710 Make: GRESSEL Type: Duogrip 125mm Year: 2012 Length:490mm Width:125mm Height:120mm Weight:55kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Crsdpfxjzu Nggs Adhjh Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: excellent (used), Year of construction: 2002, CHIRON FZ 15S with 4 axis in Perfect Condition Cedpergqu Hofx Adhjrh Machine can be inspected any time under power

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 713/714, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller model: FANUC /SEIKOS 18Mi, spindle motor power: 8 W, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, HITACHI SEIKI Vertical Machining Center VS50, 3 axes X Y Z + 4th axis with 360,000 positions. Tool magazine: 20 SK40. Control: Fanuc / Seikos 18Mi. Csdpfx Asyzyc Isdherh

Year of construction: 2023, condition: like new (used), 4-axis machining center Usefull lenght: 3200 mm Max section profile: 160x 210 mm a-axis: -15°; +195° 4 pneumatic clamps automatic positioning of clamps 2x endstops motor 5kW/20000 RPM : ISO 30 Centralised automatic lubrication system automatic toolchange with 10 positions Cjdpfsy Ec Iujx Adhorh ONLY 148 hours

Condition: ready for operation (used), Year of construction: 2008, Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement. Cedpfjy T N H Hox Adherh

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Crjdsticdljpfx Adhoh Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Mass: 350

Condition: ready for operation (used), Year of construction: 1999, Offered is a travelling column machining center: rotary table: 1500mm, travels X/Y/Z: 1600mm/800mm/800mm, tool holder: SK50, spindle drive: 60kW, speed range: 20 to 6000rpm, tool changer: 30 positions, machine weight approx. 19200kg, machine dimensions X/Y/Z approx. 6000mm/4000mm/3200mm. Incl.: internal coolant supply, chip conveyor, chip flushing system, approx. 60 pieces SK50 tool holders, 3-jaw chuck. Inspection possible by arrangement. Crsdpfsylbqyjx Adheh

Condition: ready for operation (used), Year of construction: 2005, Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement. Crjdpfjy T N Hyjx Adhsh

Condition: new, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - 227 tools in the magazin Crjdjt Hrz Dspfx Adheh - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 227 (47+10|50|60|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: new, Year of construction: 2026, More time saved! More convenience! The RED-3200/1.0/155* electric swing bending machine is ideal for thin sheet metal processing up to 1.00 mm steel sheet, recurring one-off productions, and small-batch manufacturing. The upper beam and bending beam are motorized. The RED-3200/1.0/150* motorized swing bending machine has a working length of 3200 mm and bends steel sheets up to a maximum thickness of 1.00 mm. Prod-Masz's electric sheet metal bending machines now feature an electric pressure lifting device. This is a fully electric sheet metal bending machine. ✔️ Maximum working length: 3200 mm ✔️ Bending capacity: up to 1.0 mm (steel sheet) ✔️ Titanium-zinc sheet: 1.0 mm, aluminum sheet: 1.2 mm, copper sheet: 1.2 mm ✔️ Bending angle of the bending machine: max. 150 degrees ✔️ Bending jaw thickness: 18 mm ✔️ Cutting with the roller shear across the entire working width ✔️ Lifting of the upper beam in three positions ✔️ Upper jaw stroke: 80 mm Cjdpfscri E Nsx Adhsrh ✨ Seize this unique opportunity and upgrade your workshop with the best press brake on the market! Trust the manufacturer that has been an industry leader in metalworking for years. -> Rotary shear (max. cutting capacity 1.2 mm / steel) plus €500 -> crusher/ welt press plus €75 Delivery costs: € please ask Additional equipment: - Rotating finger guide 65cm plus €1250 - Measuring gauge 36cm (2 pcs.) €75 - Measuring gauge 65cm (2 pcs.) €150 Delivery date: every Monday/Tuesday Cash on delivery or prepayment We look forward to hearing from you! - We issue invoices

Condition: used, Year of construction: 1994, faceplate diameter 1250 mm swing diameter 1400 mm turning height 1500 mm Control Siemens type 880T Table load 6000 kg Crsdpfx Adoyqvu Dohoh cross rail - adjustment 700 mm Max ram stroke 1000 mm turning speeds 400 U/min transmission ratio 2 Feed 3-8000 mm/min total power requirement 69 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, NEW EuromixMTP Drum Mixer - Capacity from 4 m³ to 15 m³ - CE standard Crjdpfx Ajym Sxwodhjh - HARDOX - Mounting on any chassis is possible For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по-русски Govorimo Srpskohrvatski = Further information = Year of manufacture: 2026 Usable material: Concrete Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for more information.