Used Metal Finisching Wbl 001 for sale (36,479)

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Hsdoq A I Upjpfx Ad Rjn Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Year of construction: 2010, Vertical bandsaw Manufacturer: Bauer Type: VG 450 L Year of manufacture: 2010 Cutting range: 90° round = 450 mm Hedpfsyfib Hsx Ad Rsn 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material inlet height: 930 mm Saw blade wheel diameter: 450 mm Saw blade dimensions: 4,450 x 34 x 1.5 mm Cutting speed: 35, 70 m/min, infinitely variable Saw blade guide: Idler pulleys + carbide inserts Material tension: manual via handwheel + trapezoidal spindle Saw frame feed: hydraulic cutting pressure control Material feed: manual Spray system Compressed air: min. 2 bar Designed for miter cuts Saw motor: 2.2 kW Coolant pump: 0.1 kW Hydraulic pump: 0.37 kW Space requirements L/W/H: 2,150 x 1,400 x 2,250 mm Weight approx. 900 kg Operating manual ä19526

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener Hsdpfschuvrjx Ad Ren +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Brinkmann SGL 1101 / 580 + 489 submersible pump 900 L / min No. 001, serial number as per photo, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hsdpfxoi D Hils Ad Ren

Condition: ready for operation (used), Baumüller BUS20-60/135-30-001 built-in power converter SN:91314741, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Hodoi D T Huspfx Ad Rsn

Condition: new, Brinkmann STC 250 / 720 MVXZ + 459 submersible pump 250 L / min No. 001, serial number as per photo, unused, 100% functional, scope of delivery as per photo ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hodpsi D Hkbsfx Ad Rjn

Condition: ready for operation (used), Brinkmann SGL331 / 770-MV+210 submersible pump SN:0920807697-31464-001, used, normal signs of use, 100% functional, scope of delivery as per photos Hsdpfoi D Hipox Ad Rjn

Condition: ready for operation (used), Balluff BIS M-352-001-S115 RFID HF Reader BIS00NY SN: 84872, used, minor signs of wear, 100% functional, scope of delivery as per photos. Hjdpfxjy Np Ebs Ad Ren

Condition: ready for operation (used), Balluff BIS M-352-001-S115 RFID HF Reader BIS00NY SN: 84877, used, minor signs of wear, 100% functional, scope of delivery as per photos. Hsdpfey Np Ehox Ad Ron

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 05/2006, loading space length: 13,610 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, total length: 13,890 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,110 mm, color: other, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = Hsdpfxey R R Exj Ad Rjn - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 7.540 kg Carrying capacity: 22.460 kg GVW: 30.000 kg Identification Registration number: OJ-46-JB

Condition: good (used), Year of construction: 2023, machine/vehicle number: 1018842, Offer 26151 Technical data: - Saw blade diameter: up to 450 mm - Cutting range with a saw blade diameter of 450 mm: - at 90°: round 150 mm - square 140 mm - flat up to 300 x 95 mm - Miter adjustable: 30° - 90° - 30° - at 45°: round 150 mm - flat 280 x 300 mm - Cutting speeds: 10 / 20 1/min - Feed rate of the saw blade: 0 - 1150 mm/min - Rapid return: 3000 mm/min - Connection: 400 V / 4.8 kW - Hydraulic material clamping device, steplessly adjustable clamping pressure - Adjustability of the backstop - via handwheel with analog display: 0 - 120 mm - Hydraulic material backstop clamping device - Micro-spray cooling system Hedpoy Uwpxjfx Ad Ren - Original infeed roller conveyor: 4000 mm - Original outfeed roller conveyor with measuring stop + digital display: 4000 mm - Space requirement: approx. W 1050 x H 1950 x D 1400 mm - Weight: approx. 1200 kg

Condition: good (used), 1 x Loma Metal Detector Push Arm Reject Aperture: Aperture 450 wide x 125mm Hedpfxjy A Rx Ne Ad Rjn

Condition: used, functionality: fully functional, Mabi 4QS + Stanze 4H Quadro seam-forming machine and tacking device Mabi 3000E segment shear Mabi casing bending machine Mabi hole punch Hedpfx Aoyz Ad Ued Rjn Mabi 40 cap trimming machine + Mabi 4K cap punch

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 Hodpfx Aey Dtpmjd Rsn ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, sheet thickness (max.): 120 mm, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Station 1: Sanding belt Station 2: Rotary brush Station 3: Rotary brush Min. sheet thickness: 0.5 mm Max. sheet thickness: 120 mm Working width: 950 mm Working height: 0.5-120 mm Hsdpfx Adoy Hhp Tj Ren MACHINE DETAILS Power: 39 kW Control: CNC Number of stations: 3 Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Net weight: 7,000 kg Transport packages: 4 EQUIPMENT CE marking

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet metal width: 3240 mm Sheet metal thickness: 2.5 mm Hsdpfsy Tn Ddsx Ad Ron

Condition: used, Safeline Mettler Toledo Mobile Pipeline Metal Detector Model power supply unit: 50H, 100-240 V, 50/60 Hz, 330 W Diameter pipe: 55 mm Hjdpfx Aeynbuwed Ron Total dimensions: 850 mm x 420 mm x 1230 mm Fully stainless steel Mobile on lockable castors

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Hsdpew A Nnpjfx Ad Ron

Condition: used, functionality: fully functional, Year of construction: 1988, Hydraulic Swing Bending Machine Make: RAS Model: 74.30, 3200 x 4mm Year: 1988 Hodpfjy Nx Ixsx Ad Rsn Technical Data Brand: RAS Year of manufacture: 1988 Model: 74.30 Working length: 3200 mm Capacity: 4 mm Stroke: 400 mm Motor power: 7.5 kW Dimensions: approx. L 4.5 x W 2.0 x H 2.50 m Weight: approx. 5.8 t Equipment • CNC-controlled backgauge 1500 mm • Multibend 8000 control system • Motorized adjustment of the bending beam • Foot switch • Tools: - 3 sharp rails - 2 bending rails, 15mm and 30mm All data provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Hedeixxqkjpfx Ad Rsn Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. *

Condition: excellent (used), Year of construction: 2019, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: BMS Multi Touch, working width: 4,010 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 985 mm, total width: 5,200 mm, input voltage: 400 V, input frequency: 50 Hz, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, We are offering this very well-maintained Sperr & Lechner BIEGEMASTER Dura 4.15 folding machine, year 2019. Hodpfx Adoy Sxayo Rjn Manufacturer: Sperr & Lechner Model: BIEGEMASTER Dura 4.15 Year of manufacture: 2019 Condition: Very good Category ID: 1472 Type ID: 1258 Machine type: Folding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Manufacturer: Kaltenbach Model: KKS 400 E Saw blade diameter: 400 mm Cutting range round: 130 mm rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm rectangular: 245 x 40 mm 2 cutting speeds: 9 and 18 m/min Feed speed steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg The machine is in very good condition and ready for immediate use Forklift available, free loading onto truck Affordable shipping possible Machine location: 48477 Hörstel Hedpfx Adoy Sktfj Ron

Condition: good (used), I am offering a swiveling bending machine with a return stop and multiple bending rails for sale. Hedpfxjx Rp T Ie Ad Rsn See photos. Suitable for sheet metal with a thickness of 4 mm, with a bending length of 3000 mm.

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. Hodpfjudb R Ijx Ad Ron incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,060 mm, sheet thickness (max.): 150 mm, total length: 2,640 mm, total width: 1,905 mm, total height: 2,090 mm, overall weight: 3,200 kg, table width: 1,060 mm, workpiece height (max.): 150 mm, power: 25.2 kW (34.26 HP), input current: 52 A, The budget-friendly entry-level model, yet equipped with all necessary functionalities. With a working width of up to 1060 mm, the machine combines deburring, edge rounding, and removal of laser oxide in a single pass. • Table width 1060 mm • Maximum workpiece height 150 mm • Deburring and edge rounding in one pass • Abrasive belt • 2 x 2 top brushes • Pressure rollers before and after each unit Hjdpfey Icrrox Ad Rsn Operator-friendly control via touchscreen. Ex-showroom machine!