Used Meissner Sr 160/2 for sale (79,449)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours Guedpfsx Uyzqox Amujb 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Gusdpfevxhnuox Amuob Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 pieces horizontal, axially split volute casing pumps in process design, with radial impeller, single-entry, single-stage. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft sealing: Double-acting Burgmann mechanical seal with flush water connection and flow meter Gjdpfxefyn Rpo Amusub Impeller diameter: 169 mm Pump speed: 2,950 rpm !!! ATTENTION !!! Operating parameters listed on the nameplate. They do NOT indicate the actual duty point performance!!!! I have uploaded 2 characteristic curves as photos. Photo 11: Duty point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87% NPSH: 2.17 Operating data for last application (approx.): Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07% NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 5.5 kW Energy efficiency: IE2 Voltage: 400/690 Volt Speed: 2,950 rpm Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology ! Price per unit !

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Gjdpfjwncv Rsx Amujub Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Condition: new, Year of construction: 2025, Angled Cutting for Single Boards and Packs of Boards: Efficiency and Precision Without Compromise The TRGSI, just like the TRSI, is a monoblock system designed to ensure outstanding installation speed and effective vibration reduction. A true innovation powerhouse for achieving flawless results in record time! Programmed Cutting for Single Boards and Packs Fixed Measurements and Customized Sequences: Thanks to the ability to manage various cutting schemes, it’s easy to set up fixed or sequential cuts, optimizing every operation. Industrial CNC Technology: An advanced system that allows for the quick storage of different cutting plans. Up to 25 different measurements can be managed simultaneously, with angled heads and independent options for every specific need. Customizable Cutting Programs: Work parameters (such as quantity and waste) are easy to set and can be customized according to individual preferences. Each cutting plan can be saved for quick access. Easy Program Loading: Cutting programs can be uploaded via USB in just a few steps, with files in .txt format for practical and fast management. Advanced Optimization: Two cutting versions to maximize efficiency: OL Version optimizes length, while the E Version offers total optimization, minimizing waste. Operating Dynamics Fast and Precise Movement: The steel guide with ball recirculation and dual sliding carriage, powered by brushless motors, ensures unmatched speed and accuracy. Durability and Perfect Sliding: The reinforced structure ensures optimal sliding, increasing the system's durability and reliability. Pneumatic Pusher: Equipped with fully protected and highly visible stroke, the pneumatic pusher system ensures maximum control and precision. Guedpfov Iqd Rox Amujb Perfect Angling and Precision: The synchronization between the lateral arm before the blade and the pneumatic presses guarantees a perfect cut, both in quality and angle. Advanced Accessories for Loading and Unloading With dedicated accessories, the system can be configured for manual or fully automatic loading and unloading operations, ensuring an uninterrupted workflow.

Year of construction: 2011, condition: excellent (used), Zechnical details : - Year - 2011 - Capacity - 3,2 t/h - El Power - 600 kw Line consists : - Coarse Hammer mill (110 kw ) - Transporter for dust wood - Furnace Automatic feeding unit - Furnace 1,5 MW - Dryer - three passes - Ciklon and silo for dry dust - Fine Hammer mill ( 110 kw ) - Silo ower head of presses - Pellet press TEKNU UNO ( 160 kw ) - Pellet press MUNCH ( 2X75 KW ) - Pellet pransporter up to cooler Guodpfx Amoipt Dleuob - Cooler - Seave - 2 x silo cacacity 100 t - 2x pellet transporter ( one for big bag packing 1000 kg ,and another for small bags 15 kg ) - Automatic packing unit - Robot for palletizing - reserve tools ( dies ) Factory still assemled and in production !!

Condition: used, Year of construction: 1969, press capacity 250 t spindle diameter 160 mm ram stroke range 180 mm stroke speed 71 Hub/min column daylight 450 mm table surface area 560x450 mm ram surface 450x400 mm total power requirement 12 kW weight of the machine ca. 9 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Guedeyt R Epopfx Amusb More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Gusdpfolvykxex Amusb -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 1x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: excellent (used), For sale: sturdy pallet truck with an unusual lattice construction. Ideal for transporting containers, crates, and loads with non-standard dimensions. - Load capacity: 2200 kg - Length: 160 cm - Width: 66 cm - Height: 29 cm, lifts up to 37 cm Gusdpfjwz Sa Esx Amueb - Openwork design – lighter and easier to keep clean - Durable steel frame - Double front and rear wheels for increased stability - Fully functional hydraulic pump - Ergonomic handle with lifting and lowering function Technical condition: good. ///// Price shown is per unit /////

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 205 h, load capacity: 1,600 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low-lift pallet truck Load centre: 600 Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: Polyurethane Guodpfoy A Am Esx Amueb Rear tyre type: Polyurethane Battery voltage: 24V Battery type: Lithium-ion Battery year: 2022 Description:

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch Gujdpfxsilx Rue Amusb -TIG hose package: Torch type SR-20, water-cooled -Length: 7.8 m -Tuchel connector: 5-pin -Weight: 3.6 kg

Condition: used, Year of construction: 2009, operating hours: 12,395 h, Equipment: all wheel drive, Internal vehicle no.: G400017 German vehicle Located at our yard in Kaufungen - Kassel, Germany, immediately available More INFO from Luis Lucena Operating hours: 12,395 Air conditioning Quick coupler Lehnhoff MS08 Weight: 8,590 kg Dozer blade Engine: Isuzu Digging bucket with 400 mm cutting edge Digging bucket with 900 mm cutting edge Grapple 600 mm Gjdpfx Asyvm Awsmuoub Errors excepted We are happy to accept your used vehicle in trade-in. Financing available directly in-house. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,540 h, load capacity: 1,600 kg, lifting height: 3,300 mm, fuel type: electric, mast type: telescopic, construction height: 2,219 mm, fork length: 1,150 mm, empty load weight: 1,489 kg, total length: 956 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Load center: 600 mm Mast type: Telescopic Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Guodpsyh R I Djfx Amuob Battery capacity: 213Ah Battery year of manufacture: 2024 Pulse control, initial lift, CE certificate,

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer -1-0 bar, unused, original packaging -Type: 1/BM 20/2 160Ø -1-0 kp/cm² -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 200/180/H70 mm Gjdpfx Aoyfmt Homusub -Weight: 0.9 kg

Condition: excellent (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch Guodpfx Ameyfffzsusb -Manufacturer: VEB, Contact manometer 0 - 0.1 bar / 0-10 kp/cm² unused original packaging -Manometer: Type 1/BM 20/2 160Ø -Switch: 220V 30W 30VA -Number: 6x pressure gauges available -Price: per piece -Cardboard dimensions: 240/240/H125 mm -Weight: 0.9 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 16 bar / 0-1.6 MPa, unused, original packaging -Type: 1/BM 20/2 160Ø 0-1.6 MPa -Number: 18x pressure gauges available -Price: per piece -Cardboard dimensions: 200/180/H70 mm Gjdpfxoyffaro Amuoub -Weight: 0.9 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 10 bar, unused, original packaging -Type: 1/BM 20/2 160Ø 0-100 mWs -Number: 8x pressure gauges available -Price: per piece Gsdpfjyfd Tkjx Amujub -Cardboard dimensions: 200/180/H70 mm -Weight: 1 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester Gujdpfxoyd S Rbe Amusb -Manufacturer: TGL, Manometer 0-600 bar, unused, original packaging -Type: 1/BM 20/2 160 0-600 kg/cm² -Number: 20x pressure gauges available -Price: per piece -Cardboard dimensions: 200/200/H70 mm -Weight: 0.9 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20/2 160 0-250 kPa Guodpeyd H H Rjfx Amujb -Number: 14x pressure gauges available -Price: per piece -Cardboard dimensions: 200/185/H70 mm -Weight: 0.9 kg/pc.

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0,8L from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm Gujdpfxelxqk Hs Amusb - Sheet metal thickness up to 0.8mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 160° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 175kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2025, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop Gjdpfx Ajuayatsmujub - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT Self pickup

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter - Face milling cutter Make Mitsubishi Type AHX 640 W 160 C 22 R Multicorner Face milling cutter for high feed rates for 22 heptagonal inserts Cutter diameter 160 mm Guedpfx Aofc Tq Esmueb

Condition: used, Year of construction: 1974, distance between columns 300 mm table length 3550 mm table width 190 mm table height 800 mm distance between columns 3230 mm column arm 300 mm weight of the machine ca. 12,5 t Guedpfox U A Rzex Amueb dimensions of the machine ca. 1600 x 3800 x 2800 m

Condition: used, Year of construction: 2024, load capacity: 16,000 kg, lifting height: 5,520 mm, total length: 8,020 mm, · Spurweite (c-c), vorn – hinten (mm) 1855 – 1960 · Wenderadius, außen – innen (mm) 5175 – 600 · Höhe bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3395 · Breite bei Kabinenneigung, max. EGO-Kabine, OHG (mm) 3380 · Min. Arbeitsgangbreite für 90° Stapelung (mm) 8770 Gjdsykvf Njpfx Amueub · Neigung Hubgerüst, vorwärts – rückwärts (°) 5 – 10 · Seitenverschub ± bei Breite über Gabelblatt (mm) 415 – 1530 · Achslast vorn, ohne Last (kg) 10500 · Achslast vorn, mit Nennlast (kg) 35800 · Achslast hinten, ohne Last (kg) 11900 · Achslast hinten, mit Nennlast (kg) 2600 · Luftdruck (Mpa) Hydraulikservo – Lenkrad · Typ – gebremste Räder Ölgekühlte Lamellenbremsen (Wet disc brakes) – Antriebsräder · Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräde · Hydraulikdruck Max. (Mpa) 18 · Hydraulikölmenge (l) 220 · Tankinhalt (l) 170 · AdBlue Volumen* (l) 15 · Motor Leistung ISO 3046 – bei Drehzahl (kW – rpm): 164/233 – 2200 · Drehmoment ISO 3046 – bei Drehzahl (Nm – rpm): 945 – 1500 · Anzahl Zylinder – Zylinderhubraum (cm³) 6 – 6702 · Kraftstoffverbrauch, normale Fahrweise (l/h) 8-10 · Kupplung, Typ: Drehmomentwandler · Getriebe, Typ: Hydrodynamisches Powershift · Anzahl der Gänge, vorwärts – rückwärts: 3 - 3 · Lichtmaschine Typ – Leistung (W) AC-1960 · Anlasserbatterie: Spannung – Kapazität (V – Ah) 2×12 – 150 · Ergonomisches Lenkrad: Es ist verstellbar und kann auch zu einer Seite geklappt werden. Dies verringert die Belastung des Fahrers beim Fahren und Zurücksetzen. · Komfortable Pedale: Ein neues, flexibles und sicheres Pedalsystem mit verstellbarem Pedalwinkel. Verbessert die Ergonomie und minimiert die Belastung der Füße des Fahrers. · Hochleistungs-Scheibenwischer: Sorgen für eine 90%-ige Deckung der gekrümmten Frontscheibe. Dachscheibenwischer sind auch integriert. · Ergonomischer Mehrfunktionssitz: Drehbar und voll integriert. · Klimapaket: Vollkommenes und flexibles Klimatisierungssystem, das den hohen Ansprüchen der klimageprüften EGO-Kabine genügt. Größere Lufteinlässe. Problemloser Filtertausch an der Maschinenfront. Vollkommener Fahrkomfort dank hervorragend dimensionierter und konstruierter Baugruppen. · Bedienkonsole: Problemloses Einstellen, Anpassen, Nutzen und Begreifen. Alle erforderlichen Bedienelemente, Schalter, Hebel und Anzeigen sind für effizientes Arbeiten leicht zugänglich. · Bedienungspult: Die vollendete Einheit für Fahrer, die das Minilenkrad oder den Lenkhebel nutzen. Integrierte Schaltknöpfe. Für optimale Ergonomie uneingeschränkt verstellbar und individuell getestet. Das ergonomische Lenkrad wird ohne Sichtbehinderung nach vorn geklappt. · Optimierte Sicht: Vollständig neues offenes Design. Mit cleveren Profilen und gekrümmten Front- und Heckscheiben. Optimierte Sicht aus allen Winkeln – mit außergewöhnlich guter Sicht diagonal nach vorn und nach hinten. Starkes Freiluftgefühl · Cummins‘ neue Dieselmotoren für EU Stage IIIB / EPA Tier 4i: Die neue Cummins-Dieselplattform kombiniert eine gekühlte Abgasrückführung mit einer verbesserten Hochdruck Common-Rail-Kraftsto0anlage (HPDR) und einem Partikelfilter. Dies ermöglicht eine sauberere und effzientere Verbrennung, die einen um bis zu fünf Prozent geringeren Kraftstoßverbrauch ohne Einschränkung der Leistung bewirkt.

Condition: good (used), Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket Gjdpforw Daljx Amuoub -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg