Used Müller Cd 100.11.69 for sale (6,084)

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30" Bjdpfxovgt Dke Ac Tswt Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini

Condition: used, Year of construction: 1973, pressure 1600 t distance between columns 3160 mm ram stroke 1450 mm distance table/blankh.,max. stroke up,adjustm. up 2250 mm table surface area 4000 x 2200 mm ram pressure 1000 t pressure of blank holder 600 t stroke of blankholder at the bottom 1000 mm stroke of blankholder with adjustment 0-100 mm 1450 mm Bwodpovxwhwofx Ac Tet blank holder size 4000 x 2200 mm die-cushion pressure inside the table 360 t stroke of drawing cushion in table 275 / 400 mm ram surface 4000 x 2200 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled oil volume 9000 l total power requirement 390 kW weight of the machine ca. 250 t dimensions of the machine ca. 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons)

Condition: good (used), gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, gear motor type IIb / DLB 421 -Speed: 50 rpm -Power: 0.8 kW Bwodsvuzhmspfx Ac Tet -Design: B3 -Shaft: Ø 35 x 80 mm -Dimensions: 475/240/H235 mm -Weight: 38 kg

Condition: used, with Tersa knife shaft used, good condition Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty Bwedpfx Acsvwgh Rs Tjt

Condition: used, functionality: unexamined, machine/vehicle number: 04010428, Racal 2461-CD universal timer/counter Bwedpfx Aexr Dkbec Tot

Condition: used, empty load weight: 5,600 kg, maximum load weight: 30,400 kg, first registration: 01/2014, next inspection (TÜV): 12/2024, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 8mm, front tire size: 385 / 65 R 22.5 / 8mm, operation weight: 36,000 kg,

Condition: used, empty load weight: 5,350 kg, maximum load weight: 30,650 kg, first registration: 05/2014, next inspection (TÜV): 04/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 5mm, front tire size: 385 / 65 R 22.5 / 5mm, operation weight: 36,000 kg,

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm Bwsdpfxsyn R D Ie Ac Tet ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: excellent (used), Year of construction: 2012, Partially overhauled Heidenhain Manual Plus 620 control system Working area: Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT Bwsdpjyffigefx Ac Tot

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles Bedpfx Asyq A D Esc Tjwt * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026

Condition: excellent (used), Year of construction: 2016, operating hours: 6,500 h, functionality: fully functional, 12 Gathering Stations Müller Martini 3692 Tensioning/Handfeeding unit 3692 ASAC Automatic Caliper Control 3715 Reject Delivery Automatic Signature Recognition Cameras: ASIR 3 12 clamps Muller Martini 1577 Pantera Touchscreen control with automatic set-up Hotmelt spine & Side gluing unit with premelter Hotmelt side glue with premelter PUR Nozzle Spine Gluing Unit Curved conveyor system 90 Muller Martini 3520 Bjdpfx Aeyufk Asc Tewt Conveyor belt Muller Martini 3520 Conveyor belt with escape gate 3520 Müller Martini Granit 3 Knife Trimmer 3676 Müller Martini UNO Stacker 1534

Condition: used, empty load weight: 2,700 kg, maximum load weight: 7,300 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 06/2006, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 1,000 mm, suspension: steel, tire size: 245/70R19.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, leaf suspension, 2 axles, BPW axles, tandem, lashing eyes, underrun protection, front support, swing tailgates. Body: 3-way tipper trailer with steel drop sides, swinging and folding down, 2x BPW axles, drum brakes! Loading height approx. 1040mm. Bwodpeytxx Refx Ac Tet Drop sides foldable at the top & bottom! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale and errors!

Condition: used, mileage: 7,206 km, power: 375 kW (509.86 HP), first registration: 08/2024, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, The vehicle has been at MAN Hanover since 25.09.25. Multifunction steering wheel, front windshield sun visor, sunblind for door side windows, cooler box, MAN sound system, side camera system (SCS) ## SEE DOCUMENTS ## Müller 12105900 Bjdpfov Ndq Hsx Ac Towt

Condition: used, mileage: 262,130 km, power: 315 kW (428.28 HP), first registration: 09/2015, overall weight: 18,000 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 3,350 kg, empty load weight: 14,650 kg, next inspection (TÜV): 10/2025, wheelbase: 4,200 mm, brakes: constant throttle, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mercedes PowerShift 3, rental car, 1x comfort seat, heated seats, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), power take-off, raised exhaust, automatic transmission, differential lock, fog lights, work lights, rotating beacon, storage box, leaf air suspension, roof hatch, radio remote control, green environmental sticker. Wheelbase: 4200 mm. Body: Müller Canalmaster CM F 80 ET suction and flushing truck with approx. 8m³ (6,500l sludge chamber/1,500l water chamber) and radio remote control. Front axle 9t, rear axle with 300 planetary gears 13.4t, electronic braking system with ABS and ASR, disc brakes with partial protection front and rear, condensate monitoring for the compressed air system, front stabilizer, additional stabilizer for rear/trailing axle, aluminum front underrun protection, residual heat recovery, auxiliary hot water heating, construction site filter, PSM, reversing alarm, CompactSpace, comfort locking system, Power drive program, Mercedes PowerShift 3, clutch-dependent NMV MB 1.2, NMV transmission lock, transmission oil cooling, refrigerator, ESP: Wittig Aqualine 1600 water ring vacuum pump 400mbar/1300m³/h Uraca KD 716/G 60-110/MU high-pressure piston pump 170bar at 325l/min Operating hours Vehicle: 11112h Bjdewc D Dfspfx Ac Towt Body: 2474h ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: excellent (used), Professional industrial hydraulic press from the renowned German manufacturer MÜLLER – Fritz Müller Pressenfabrik Esslingen. Robust and heavy-duty construction designed for pressing, stamping, punching, and forming metal and technical components. The machine is in good visual and technical condition. Equipped with manual controls, stroke counter, and pressure gauge. This industrial-grade design is ideal for manufacturing plants, tool shops, workshops, and production lines. Technical specifications: Manufacturer: MÜLLER Model: S 16.1.20 Year of manufacture: 1977 Machine number: 9183 Bjdpoy St R Tofx Ac Tjwt Machine type: hydraulic press Two-hand control Stroke counter Pressure gauge Overrun path: 5 mm Overrun time: 35 ms Safety distance: 55 mm Robust steel frame Three-phase power supply Applications: - Pressing of metal components - Stamping - Punching - Forming parts - Production and workshop operations - Sheet metal and technical parts processing Delivery on pallet or loading via forklift possible.

Condition: ready for operation (used), Baumüller GSF 71-M servomotor SN: 89203685 - 22A / 170V, used, in good condition, 100% functional, delivery as per photos Bedoy Nn Ibspfx Ac Tjwt

Condition: ready for operation (used), Baumüller LS 3.8107D controller board – checked and tested! – 100% functional, scope of delivery as per photos Bwjdpfjy Np Ezsx Ac Tst

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 06/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine Bwjdpfx Asy R Ipnec Tet * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), Year of construction: 2007, operating hours: 15,700 h, functionality: fully functional, Equipment: compressor, documentation/manual, Müller Martin Sammelhefter Bravo Plus T comprising: 4 x double feeders 1555.0403 incl. ASIR, 1 x folding feeder 1529.0417, 1 x Semko 0333.0435 (year 2018), 1 x stitching machine 0380.0450, 1 x three-knife trimmer 0449.0430. Includes DruVa pumps, optional PIAB. Bwjdpoyamrlsfx Ac Tot

Condition: used, overall weight: 36,000 kg, first registration: 09/2019, - Lift axle - Curtain - Alloy wheels Bsdpfoy A Df Aox Ac Towt

Condition: used, pressure 25 t throat 250 mm stroke 10 - 120 mm Bjdpfx Aceykb A To Tewt no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 1,95 t

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Bedoym U Inspfx Ac Tewt Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t Bwsdpfoynbc Iox Ac Tjt dimensions of the machine ca. 4,95 x 3,3 x 10,2 m

Condition: used, Year of construction: 1972, pressure 800 t distance between columns 3160 mm stroke 1100 mm control Siemens S5 distance table/blankh.,max. stroke up,adjustm. up 1900 mm table surface area 3100 x 1900 mm die-cushion pressure inside the table 300 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 80 t stroke of drawing cushion in table 150 mm ram surface 3100 x 1900 mm die-cushion in pusher hydraulic, controlled die-cushion inside the table hydraulic, controlled total power requirement 200 kW weight of the machine ca. 150 t dimensions of the machine ca. 4,95 x 3,3 x 10,2 m Bwodpfxsynbdfs Ac Tst

Condition: used, maximum load weight: 5,900 kg, overall weight: 9,000 kg, axle configuration: 2 axles, first registration: 05/2020, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, loading space volume: 5 m³, Equipment: ABS, * ABS * 5-chamber rear lights * Height-adjustable towing device * Gigant axles * Front landing gear ----Superstructure: Low-loader trailer, loading height approx. 870mm, rear sloped, access height approx. 780mm, spring-assisted steel side walls left and right, wooden floor, lashing eyes and lashing rings. Spring-assisted and laterally adjustable loading ramps with hot-dip galvanized grating, slip-resistant design (length approx. 2,600mm), automatic rear support coupled with ramp operation, plastic toolbox in front of the bulkhead. Chassis, front wall, drawbar, rear wall, ramps and stakes hot-dip galvanized. Bwsdpfxoyncyhe Ac Tot Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see legal notice).