Used Loading System Mazak Emc3015 High Column for sale (65,388)

Condition: used, Year of construction: 2007, functionality: fully functional, A used Mazak machining center is offered for sale. Technical specifications at a glance: • CNC control: MAZATROL Matrix NEXUS • Travel ranges: • X-axis: 730 mm • Y-axis: 730 mm • Z-axis: 740 mm • B-axis (rotary table): 360° without stops / indexing 0.001° • Pallets & table: • Pallet size: 500 x 500 mm • Number of pallets: Standard 2 pallets (or extended pallet changing systems) • Max. workpiece weight: 700 kg Nwedpfjz R Db Njx Akisn • Max. workpiece diameter: Ø 800 mm • Max. workpiece height: 1,000 mm • Main spindle: • Spindle speed: Standard up to 18,000 rpm The spindle was replaced last year. However, the front bearing is making noise again. Renishaw 70 bar Consep 2000 2 additional pallets 80 tools Palltech preparation Big Plus Automatic tool changer Handwheel Simultaneous thread cutting

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min Nodpfozzd Rtsx Akiown torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) Nsdpfxez Slmdj Akiown • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: used, Year of construction: 2007, machine/vehicle number: 1369, Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-SystemYear 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video Nsdpfx Ajh Aya Iskiswn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2007, TOP CONDITION - OVERHAULED IN 2026! Year of construction: 2007 Table format: 3000 x 1500 x 250 mm Power: 2500W Control: Fanuc incl. cooler incl. pipe axis incl. 5 axis 3D torch incl. programming software incl. training incl. commissioning incl. ball roller table FE: up to 20mm VA: up to 12mm oxide-free designed for high pressure cutting up to 20 bar No Foundation is necessary! Nwodpfx Ako Afix Ijijn Optional automatic loading and unloading by Mazak CELL510 could be offered with warranty / commissioning / training always regularly serviced

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: Nsdpfozzz Eusx Akiswn * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Lathe with gantry loading! Nwedpfx Aoxzubpekisn MACHINE DETAILS Weight: 8,400 kg

Condition: used, functionality: fully functional, Year of construction: 2004, Mazak Super Turbo-X612 Mk II (2004) CO2 laser cutting machine with 4,000 W laser output for 4,000 x 2,000 mm sheets up to 25 mm thick. Mazatrol L32B CNC control. CNC CONTROL Controller: Mazatrol L32B LASER Laser source: CO2 Rated laser output W: 4.000 TRAVELS & WORK AREA X-axis travel mm: 4.185 Y-axis travel mm: 2.020 Z-axis travel mm: 100 Max. sheet size mm: 4.000 x 2.000 Max. table load kg: 1.500 DIMENSIONS Machine weight kg: 23.900 Nwedpfx As Aa A Tuokijn EQUIPMENT & OPTIONS • Mazatrol L32B CNC control • CO2 laser resonator, 4,000 W rated output

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Nwsdpfoz Dtmgsx Akien Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm Nwsdpsyz Dtdsfx Akien - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Mazak VARIAXIS500-5XII was manufactured in 2006. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 60 positions. The machine has an impressive X-axis travel of 510 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS500-5XII vertical machining centre we have for sale. Contact us for further details. • Outer length: 500 mm • Outer width: 400 mm Nwedozzwnfspfx Akien • Table load: 300 kg • Max distance between vertical spindle and table: 140 - 600 mm • Number of tool slots: 60 positions • Chip conveyor: Belt type (with chip pan preparation) • Cooling pressure: 15 kg • Controlled Axes: 5 continuous • Table Dimensions: 500 x 400 mm (x 2 pallets) • Distance Spindle Nose to Horizontal Table: 190 - 650 mm • Spindle Torque: 252 Nm (186 ) • Operating Hours (Power On): 57,979 hrs 58 min 25 sec • Operating Hours (Auto Cut): 31,273 hrs 09 min 14 sec • Operating Hours (Cutting Time): 27,810 hrs 53 min 42 sec • Total Time: 57,979 hrs 58 min 24 sec • Installed Software Options: Auto Pecking Cycle with Load Detection, Synchronized Tapping, EIA Dynamic Compensation 2, Additional M-Code Function (2 M-Codes), G00 Slope Constant, Mazacc-3D High-Speed Software Package, Shape Compensation for Rotary Axes, Tilted Working Plane, Simultaneous 5 Axis Control • Visual Observations: Internal chamber shows normal surface wear and minor coolant staining on enclosure walls, no visible major mechanical damage

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Mazak FH-5800 – Horizontal Machining Center Spindle cooling Max. 12,000 RPM Z = 660 millimeters Nwedpfx Akez Ehkpeion X = 710 millimeters Y = 610 millimeters Tool magazine for 40 tools, newer control system – 2-pallet system.

Condition: new, High-quality grid decking with high load capacities, a cost-effective alternative to grid grating – new product – Prices available upon request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (so, for a 2.70m beam, 3 deckings are required = 2,655mm) 1335mm Frame depths: 1.05m Nwedpfx Akoiuvxboijn 1.10m 1.20m Other depths available upon request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1,000kg, i.e., also per pallet Grid spacing: 50 x 100 or 25x100mm When making an inquiry, please also specify the type of beam (crossbeam) you have! I.e., whether it is a box profile (or IPE beam) 50 or 40mm, or whether you have crossbeams with a step. Advantages: no sharp edges 200% safety factor – independent of the shelving beams Tested for permissible deflection and structural failure Wide selection of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. MantaMESH provides assurance with more than 70% open area and a safety factor of 200%, exceeding the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR sprinklers. Compatible with ANSI MH 26.2 - 2007 Made in Germany Pre-welded, hemmed support channels Pre-galvanized finish Maximum deflection independent of the rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of the beam: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration – we would be happy to create a configuration for your application! Depth 1102mm Width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the beams Front: folds out 30mm Rear: folds down 30mm on the outside Item weight 9.43kg

Condition: good (used), Year of construction: 2011, Load moving system CBM 240 / ST 120 MACH-ID 923 Njdpfxswvhrtj Akiown Type: CBM 240 / ST 120 Year: 2011

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Njdpfx Aezza Hkokiown Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Condition: good (used), mileage: 142,900 km, power: 390 kW (530.25 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power mirror, spoiler, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum fuel tank - Roof spoiler - Euro 6 emission standard - Adjustable steering wheel - Tilting hydraulics - Air conditioning Nwodpfx Akexbrmveien - Leather steering wheel - Air suspension - Front center armrest - Radio with MP3 support - Sleeper cab - Sun visor - Auxiliary heater - Power take-off (PTO) = Additional Information = General Information Year of manufacture: 2024 Registration number: 57-BXX-8 Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Front axle: Max. axle load: 8000 kg; Steered Rear axle: Dual tires; Differential lock; Max. axle load: 11500 kg Weights Unladen weight: 8,292 kg Payload: 12,708 kg GVW: 21,000 kg Interior Upholstery: Leather Maintenance, History, and Condition APK (Technical Inspection): Valid until 10/2027 Technical condition: good Optical condition: good

Condition: good (used), Year of construction: 2015, Steering skate length:630mm Steering skate width:220mm Steering skate hight:115mm Skate length: 630mm Skate width: 220mm Skate hight: 115mm Max. loading capacity:12T Njdpfx Akswvhpfeiown Wheel Ø: 85mm Wheel material: steel Hydraulic jacks: 2 Lifting range of foot:30 - 260mm Lifting range of head:420 - 650mm

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Njdezf H Nmjpfx Akijwn Cutting depth main saw: 123 mm Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 192746, MAZAK PFH-5800 – Technical Specifications Manufacturer: Mazak Model: PFH-5800 Year of manufacture: 2007 Machine type: Horizontal CNC Machining Centre CNC control: MAZATROL 640M Working range • X-axis travel: 730 mm • Y-axis travel: 730 mm • Z-axis travel: 740 mm • Maximum workpiece diameter: Ø800 mm • Maximum workpiece height: 1,000 mm • Pallet size: 500 × 500 mm • Maximum pallet/workpiece load: 700 kg • B-axis: 360° indexing • Standard indexing: 1° × 360 positions • Optional NC rotary table: 0.001° × 360,000 positions Spindle • Spindle taper: CAT 40 • Spindle speed: up to 12,000 rpm • Spindle motor: 30 kW / 40 HP (15-minute rating) • Continuous rating: approx. 18.5 kW • Maximum torque: approx. 167 Nm Tool changer • Tool magazine: 330 tools • Tool holder: CAT 40 • Maximum tool diameter: 150 mm with adjacent pocket empty • Maximum tool length: 400 mm • Maximum tool weight: 12 kg Nsdpfxsz D Azae Akiswn

Condition: used, Year of construction: 2008, For sale is a vertical CNC machining center, MAZAK VCN-510C-II, manufactured in 2008. The machine comes from an industrial facility and is offered including the accessories and tool holders shown in the pictures. Technical data: Manufacturer: MAZAK / Yamazaki Mazak Model: Vertical Center Nexus VCN-510C-II Year of manufacture: 2008 Serial/Part No.: C22U5630050 Control: Mazatrol Matrix Nexus Travel distances X/Y/Z: approx. 1,050 / 510 / 510 mm Table size: approx. 1,300 × 550 mm Tool magazine: 30 positions Spindle speed: up to approx. 12,000 rpm Tool holder: SK40 Power supply: 3-phase, 400 V / 50 Hz Control circuit: AC 100 V / DC 24 V Rated connected power according to the nameplate: 33.1 kVA Weight: approx. 7,100 kg Dimensions: approx. 2,750 × 2,800 × 3,800 mm (W × H × L) Various tool holders and other accessories shown in the photos are included. Please refer to the pictures to determine the scope and exact assignment of the accessories, or check during an inspection. The machine shows signs of wear and tear due to age and use. Inspection is possible by arrangement. Njdpoz D Dg Defx Akiswn Loading, transport, and disassembly must be coordinated with the buyer in advance. Sale preferably to commercial enterprises. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals 12,000rpm Nedpfxezxr Twj Akiswn 40 ATC DIN40 / Renishaw probing Pallet size 400mm x 400mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Lathe with gantry loading! MACHINE DETAILS Njdpfx Aoypc Ibskiswn Weight: 8,400 kg

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Nsdpfxozh Ndxj Akiewn Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 147342, turning length: 514 mm, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Swinging diameter: max. 525 mm Turning diameter: max. 350 mm Turning length: max. 514 mm Bar diameter: max. 51 mm Njdpfx Ae Afw Rrjkiewn Spindle speed: 35–5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2-6 Spindle bore: 61 mm Tool stations: 12 X-axis travel: 190 mm Z-axis travel: 535 mm MACHINE DETAILS Weight: 5,650 kg EQUIPMENT 12-position tool turret

Condition: used, Year of construction: 2002, Unloading system Nwedjxy Rn Aepfx Akisn Polar TR 160-ER-6 Description - On the right side of the guillotine