Used Large Brewing Kettle (Approx. 330L) for sale (26,565)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Ndedpfx Ajz Iq Trobyoc Also available with the ARYA system – automatic film application possible

Condition: used, machine/vehicle number: H21202Y00369, Year of construction: 2021, operating hours: 16,945 h, load capacity: 3,500 kg, lifting height: 5,495 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! Ndsdpfx Asz Nn A Usbysc TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 5,495 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Duplex mast Drive type: LPG UVV certificate valid until: 09/2027 Next service due in: 853 hours Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 3,424 mm Own weight: 5,523 kg Operating hours: 16,945 h EQUIPMENT Facelift model Former Linde full-service unit Duplex free-lift mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Full cabin Air conditioning (AC) Cabin heater Windshield wiper LED work lights front and rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 40

Condition: used, machine/vehicle number: H2X388H00203, Year of construction: 2017, operating hours: 11,137 h, load capacity: 3,500 kg, lifting height: 4,100 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,100 mm Mast type: Duplex mast Free-lift mast: Without central hydraulic cylinder Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery voltage at rest: 85.0 V Operating hours: 11,137 h Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,500 x 2,904 mm Service valid until: 07/2027 EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Fork positioner Side shifter Ndsdpfx Absz Npb Eoyjc Full cabin Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected within the specified time. Any outstanding storage fees must be paid in full before collection. Lot number: 77

Condition: used, machine/vehicle number: H2X387V04014, Year of construction: 2019, operating hours: 12,756 h, load capacity: 2,500 kg, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,430 mm Load capacity: 2,500 kg MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: Lithium-ion Battery voltage: 90 V Battery capacity: 268 Ah Battery year of manufacture: 09/2019 Nedpfez Npgujx Abyjdc Measured battery voltage in idle state: 95.5 V Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,824 mm Dead weight: 5,256 kg Service valid until: 09/2027 UVV (Occupational Safety and Health) valid until: 09/2027 Operating hours: 12,756 h EQUIPMENT Former Linde full-service unit 3rd & 4th valve Full cabin Radio Heater Windshield wiper Tilt angle display Non-marking white tires LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety Light, front Safety Light, rear Rear view camera Fork positioner Side shifter All dimensions are approximate values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 87

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, - Did you know that energy costs can be reduced by up to 40%? Ndsdpfxez Imk He Abyjc - The thermal oil circulates evenly through the heating radiators at temperatures up to 300°C. The heat is distributed gently and consistently over the products. - Control: PLC touchscreen control panel (including Dutch language option) with memory for 199 automatic baking programs, each with 5 phases. - Advantages: Energy-efficient, very quiet in operation, precise temperature control, and prevents products from drying out. - Heating: Connection to a central thermal oil system (no separate gas burner or flue gas system required in the bakery). - Trolley capacity: Suitable for 1 or 2 trolleys/carts (standard trolley sizes such as 600 x 800 mm or 600 x 1000 mm). - Extremely suitable for medium-sized to large bakeries. - Heating power: approx. 80 kW - Electrical connection power: approx. 4.6 kW - Electrical connection: 400V three-phase power - Control voltage: 230V - Heating: Oil-fired

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,300 kg, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Villex Big Cube Long Doppio Nero 1.0 – Premium Space Container 6.0 x 3.0 m (RAL 7016) Are you looking for a spacious, modern, and extremely flexible space solution? The Villex Big Cube Long Doppio Nero 1.0 offers significantly more space than standard containers with 18 m² of floor space and extra-wide dimensions (3.0 m). Perfectly suited as a representative office, workshop, sales area, break room, or event container! 🔹 TOP FEATURES Modern look: Exterior panels & base frame completely in elegant anthracite (RAL 7016). Plenty of daylight: Two large double windows create a bright, welcoming working environment. Usable year-round: 50 mm high-quality insulation keeps the interior warm in winter and pleasantly cool in summer. Extra-wide floor plan: With a width of 3.0 m, it offers noticeably more freedom of movement than conventional containers. 🔹 TECHNICAL DATA & EQUIPMENT Model: Villex Big Cube Long Doppio Nero 1.0 External dimensions: 6.00 m x 3.00 m x 2.60 m (L x W x H) Area: approx. 18 m² Weight: approx. 1,300 kg (robust, durable steel construction) Color: RAL 7016 (Anthracite) Insulation: 50 mm sandwich panels (wall/roof) Door: 1x sturdy, secure steel door Nsdpfx Ajz Rz Tvobyedc Windows: 2x large double windows (2000 mm x 1000 mm) 🔹 ELECTRICAL EQUIPMENT (READY FOR IMMEDIATE USE) Power connection: 1x 32A CEE external plug Sockets: 3x double sockets Lighting: 2x modern LED lighting units Switch: 1x light switch + complete fuse box 🛠 SPECIAL REQUESTS & INDIVIDUAL CUSTOMIZATIONS Do you need additional equipment? We manufacture and expand to suit your exact requirements: Air conditioning: Installation of an air conditioning system (cooling & heating) is possible upon request. Sanitary & kitchen: Installation of a toilet, shower, sink, or mini-kitchen. Security: Roller shutters, additional locks, or safety glass. Individual dimensions & systems: Also available as a double or multi-unit system. 🚚 DELIVERY & SERVICE Delivery: Fast, nationwide delivery directly to your desired location. Assembly: Easy assembly – ready for immediate use. 📞 INTERESTED OR HAVE QUESTIONS? Write us a direct message or call us! We will gladly advise you free of charge on your project and create a suitable offer for you. (Office container 6x3, living container, workshop container, event container, sales container, break room, space cell, modular construction, Villex Big Cube, Anthracite RAL 7016, quick-assembly container, commercial container, container 18m2)

Operating hours: 12,087 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,760 mm Free lift: available Mast type: Triple mast Fork length: 1,600 mm Hydraulically adjustable forks: available Side shifter: available Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E25L EVO Year of manufacture: 2018 Drive type: Electric Operating hours: 12,087 h Battery: 80 V / 575 Ah Battery year of manufacture: Battery voltage at rest: 84.3 V Self-weight: 4,800 kg Overall length: 4,100 mm Overall width: 1,150 mm Overall height: 2,176 mm Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Full cabin Heater Windshield wiper Fork positioner Side shifter Tilt angle display Facelift model All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Ndsdpfjz R Dvmjx Abyjc Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 102

Operating hours: 6,836 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,620 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Fuel: LPG Operating hours: 6,836 h UVV valid until: 09/2027 Next service due in: 204 operating hours MACHINE DETAILS Manufacturer: Linde Type: H20T Year of manufacture: 2016 Own weight: 3,290 kg Overall length: 3,400 mm Overall width: 1,150 mm Overall height: 2,200 mm EQUIPMENT Side shifter 3rd hydraulic valve 4th additional hydraulic valve, free for fork positioner Half cab Windshield wiper Non-marking white tires LED work light (front) LED work light (rear) Orange warning light Safety light (front) Safety light (rear) Nsdpfx Aoz R D Aysbyodc Comfort seat with lumbar support Seat heating LPG gas exchange bottle Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 213

Operating hours: 2,419 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 125 mm Fork length: 1,150 mm Operating hours: 2,419 h Battery voltage: 24 V Battery capacity: 500 Ah Battery type: 4 PzS Battery voltage in idle state: 25.3 V Battery year of manufacture: 2021 Next service due in: 1,000 h MACHINE DETAILS Manufacturer: Linde Type: T20AP Year of manufacture: 2021 Overall length: 2,000 mm Overall width: 750 mm Overall height: 1,200 mm Dead weight: 1,000 kg EQUIPMENT Ndedpfx Abjz R D Dkoysc Folding platform Battery with Aqua+EUW Formerly a Linde full-service unit All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-collection within the specified period, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 309

Condition: good (used), functionality: fully functional, Year of construction: 2015, control type: CNC control, degree of automation: automatic, laser source manufacturer: IPG, laser source model: YLS-6000, laser power: 6,000 W, laser wavelength: 1,070 nm, positioning speed: 350 m/min, Equipment: CE marking, centralized greasing system, cooling unit, emergency stop, safety light barrier, TECHNICAL DETAILS General Information Manufacturer: EAGLE Model: iNspire 1530 F6.0 Machine Type: Laser Cutting System Weight: 18,000 kg Laser Source Laser Source: IPG Fiber Laser Laser Power: 6 kW Working Area and Travel Ranges Working Area: 3,000 × 1,500 mm X-Axis: 3,060 mm Y-Axis: 1,540 mm Z-Axis: 120 mm Dynamics and Positioning Maximum Cutting Speed X/Y/Z-Axis: 150 m/min Cutting Speed with Simultaneous Axis Movement: 280 m/min Positioning Speed: 280 m/min Acceleration: 60 m/s² Acceleration: 6 g Minimum Programmable Stroke: 0.001 mm/m Repeatability: 0.03 mm/m Cutting Accuracy: 0.05 mm/m Cutting Capacities Black Steel: 25 mm Stainless Steel: 25 mm Aluminum: 20 mm Brass: 12 mm Copper: 10 mm Pallet Load Maximum Sheet Metal Weight: 1,000 kg Gas Supply Ndedpfjz R D Dqex Abysc Air Pressure: 6 bar Nitrogen Pressure N₂: 25 bar Oxygen Pressure O₂: 10 bar Operating Times Beam Emission Time: approx. 4,400 h Laser Activation Time: 19,855 h Electrical Data Main Power Supply: 400 V / 50 Hz Power Consumption: 54 kVA Control Voltage: 24 V Machine Dimensions Length: 1,000 mm Width: 3,080 mm Height: 3,060 mm Cutting Head Overhaul: 9 months ago at the manufacturer EQUIPMENT IPG Fiber Laser Source Linear Motors in All Axes Carbon Crossbeam Composite Body Pallet Changer Various Nozzles Protective Lenses Additional Accessories

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DRIVE Drive type: Electric Battery voltage: 48 V Battery capacity: 375 Ah Battery voltage at rest: 50.5 V OPERATING DATA Operating hours according to display: 16,042 h Year of manufacture: 2018 MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 1,850 mm Overall width: 1,000 mm Overall height: 1,400 mm Unladen weight: 1,500 kg EQUIPMENT White, non-marking tires Road approval lighting with turn signals, compliant with StVZO (German Road Traffic Licensing Regulations) Service valid until: UVV (Occupational Safety and Health) valid until: Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons with a large forklift truck available on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 329 Nsdpfxoz R D Euo Abyodc

Operating hours: 1,288 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm Battery voltage: 24 V Battery capacity: 300 Ah Battery voltage in idle mode: 25 V Operating hours: 1,288 h MACHINE DETAILS Ndsdpfx Aez R D Ipebyec Manufacturer: Toyota Type: LPD200 Year of manufacture: 2020 Own weight: 850 kg Overall length: 2,000 mm Overall width: 800 mm Overall height: 850 mm EQUIPMENT Folding platform Battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: used, machine/vehicle number: H2X386V04476, Year of construction: 2019, operating hours: 24,655 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork spreader: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery voltage at rest: 50.8 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: UVV 07/2027 UVV inspection valid until: UVV 07/2027 Operating hours: 24,655 h EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Side fall protection White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support and seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Nsdpez Nv Ewefx Abyodc Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 131

Condition: used, machine/vehicle number: 517388V00095, Year of construction: 2019, operating hours: 6,982 h, load capacity: 3,500 kg, lifting height: 4,500 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,500 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive: LPG Ndjdoz Nwbtepfx Abyoc Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,250 mm Weight: 5,017 kg Next service due in: 901 hours UVV certificate valid until: 07/2027 Operating hours: 6,982 hours EQUIPMENT Former Still full-service unit Fork positioner with side shifter Semi-cab with windshield wiper LED work light (front) LED work light (rear) Orange warning light Comfort seat LPG gas cylinder with quick-change system Hydraulics: 3rd and 4th auxiliary valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 148

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. Ndsdpfxszknwco Abyec The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Program runtime: 5,812 hours Spindle runtime: 5,740 hours Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Travel Z-axis: 1300 - mm Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: new, 1 brand new hydraulic swing-cut plate shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Max. cutting length: 2100 mm Max. sheet thickness, for normal steel: 6.5 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting speed: 29 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 2670 x 2000 x 1600 mm Weight: 4500 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning display for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal • Central shear gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the clamping beam • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Delivery time: immediately, subject to prior sale plus additional freight costs China - Germany Ndsdpfxed Ad A Es Abysc Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, 1 brand new hydraulic oscillating shear Njdpfed Ad Dbex Abysdc Manufacturer: LAMI NOVA / Exclusive dealership! Model: SC 4006 Max. cutting length: 4100 mm Max. sheet thickness, for normal steel: 6 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting rate: 14 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 4630 x 2050 x 1700 mm Weight: 9600 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning indicator for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal plates • Central cutting gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the hold-down device • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Fig.: with option! Delivery time: approx. 3 months after order receipt plus pre-carriage costs China - Germany Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm Nodpfsk Dpxlox Abyjdc • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Ndsdpfx Abez Tf D Roysc Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display Nodoz S Euaepfx Abyjdc

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel ranges X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm Work table Table size: 500 mm Feed rate and rapid traverse Feed rate range: 2–10,000 mm/min Rapid traverse: 10 m/min Spindle and tool holder Tool holder: ISO 40 Speed range: 0–6,300 rpm Main drive: 8 kW Control system CNC control: Dialog 11 Performance data Total power consumption: 23 kVA Machine weight: approx. 5,050 kg Dimensions Space requirement: approx. 3.0 × 2.5 × 2.0 m Overhaul and modernization Overhaul: 2010 by FPS Modernization: 2010 by FPS EQUIPMENT Splash guard cabin Ndedpfez S I Suox Abyjc Rotary table as 4th axis Tool changer magazine with 40 positions Dialog 11 control

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Ndedpfxex Adbno Abyec Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm Nsdpfey E Hynex Abysdc saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber, EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) cooling incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests of lithium-ion energy storage systems. Special added value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) Performing aging tests on lithium-ion cells Performance tests (charge/discharge cycles at varying temperatures) Temperature endurance tests and temperature change tests Tests of unpowered and cyclically powered cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / e-mobility / energy storage The P Plus package turns the KB 720 into a genuine battery safety test chamber: Ndsdpfxezizr Rj Abyec Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & audible alarm Mechanical double-door locking system (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inertization (e.g., nitrogen) Emergency stop / manual triggering of the extinguishing system Feedthrough openings for charging and measuring cables Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur without resulting in an explosion or uncontrolled propagation. Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and failure scenarios. Technical key data: Temperature range: -10 °C to +100 °C Interior volume: approx. 698 liters Inserts: 4 x stainless steel Max. load per insert: 45 kg Max. total load: 100 kg Electrical data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, mileage: 835,205 km, power: 331 kW (450.03 HP), first registration: 02/2019, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania R 450 A4x2NA SZM FIN: 9252276 Chassis / Components: * Wheelbase: 3,750 mm * Full / Air suspension (2 bellows) * Tires: Front: 385/55 R.22.5, Rear: 315/70 R.22.5 * Remaining tread depth: Front: approx. 60/50%, Rear: approx. 30/20% * 1 x Aluminum fuel tank 600 L * 1 x AD-Blue tank * 1 x Hydraulic tank Cab: * CS 20 H * 2 x Bunks * Refrigerator * Automatic climate control * Stationary air conditioning * Auxiliary heater * Scania Infotainment Premium * Aux, USB, BT * Skylights / LED * DAB * Scania AEB = Emergency Braking Assist * Scania ACC = Adaptive Cruise Control * LDW = Lane Departure Warning Engine / Transmission: * 12,742 ccm // 450 hp / 331 kW // EURO 6c * Scania Retarder * Opticruise / Automatic with 2 pedals * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 7,998 kg * Payload: 10,000 kg Other: * German vehicle * 1 previous owner Nedo Abbi Djpfx Abyodc * MOT (TÜV) valid until 08/27 ---- New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors, changes, prior sales and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a large number of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you with the loading of your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary license plates / export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.