Used Kolbus Sta 840 for sale (11,883)

Condition: used, functionality: unexamined, Year of construction: 1975, load capacity: 6,300 kg, Stahl, lifting capacity 6300 kg. Nedpfxszvgxis Akielh

Condition: new, axle configuration: 3 axles, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, farmSTAR 60.4 cbm Silver gray Chassis material: Aluminum Chassis type: Sliding floor Axle spacing (mm): 1310-1310 Kingpin height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Internal height front (mm) (IHF): 2,300 Internal height rear (mm) (IHB): 2,300 Loading length (mm): 10613 Height of chassis neck (mm): 240 Overall width (mm): 2550 Volume (m³): 60.41 Overall length (mm): 11,420 Disc brake Number of axles with spring brakes: 2 Offset (ET): 120 Option 1: 1st axle with lift axle and starting aid Activation of the starting aid via button in the truck (button mounting is not included in the scope of supply) and by pressing the brake pedal three times Option 3: 3rd axle with lift axle and Optiturn Nljdpfxez Shv Ij Akioh Activation of the additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h ECAS air suspension with raising and lowering valve Lowering of the air suspension via Smartboard, as well as raising and lowering valve Coupling head: Pneumatic, European Palm coupling Control console: EBS operation, on the left-hand side in the direction of travel, behind the axles Standard Smartboard Air and electrical console in the center with gantry Outriggers: Aluminum telescopic supports Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome with STAS logo Manufacturer of lighting: Aspöck Type of lighting: ECOLED III - with STAS logo Rear lights: 2 LED rear lights, mounted at the rear in the direction of travel, left and right on the lamp carrier Position of work lights (operated via switch): 2 LED rear lights at the rear in the direction of travel, left and right, mounted behind the axles Position of work lights (operated via switch): 2 LED rear lights at the front in the direction of travel, left and right, mounted in the area of the outriggers Position of work lights (operated via switch): 1 piece inside on the front wall in the direction of travel, on the left Protection of the lighting unit: One-piece mudguard LEDs in the door closure cross member: 2 x 3-function LED Underbody protection Operation of underbody protection: Fixed underbody protection Splash guards: Black with STAS logo Hydraulics Position of control console: Sliding floor, left, in front of the axles Hydraulic coupling: SKL Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling return: SKL Hydraulic coupling return - Size: 1 Hydraulic coupling return - Gender: Female Hydraulic coupling - Hose: 3,000 mm Hydraulic coupling - Position: Connection possibility on the front wall (also with connection possibility on the outriggers) Hydraulic coupling - Design: Standard design Hydraulic positioning: Pressure return, pressure left, return right (CON) Suspension of the hydraulic hose with springs: Yes Toolbox Air connection in the toolbox Aluminum extension ladder: 2.5 m, extendable - on the right in the direction of travel Profile of the front wall: 3 mm - 2 mm Service door: On the left in the direction of travel - opens outwards (safety aspect) Profile of the side wall: 3 mm - 2 mm Sliding floor system: Manufacturer: Cargo Floor Operation of the floor system: Remote control Sliding floor system: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 11 mm smooth, overlapping End plate: Sliding floor, Aluminum Mounting of the end caps: Welded Oil t

Condition: ready for operation (used), Year of construction: 2008, working width: 1,350 mm, total width: 2,100 mm, total height: 2,300 mm, overall weight: 10,000 kg, product length (max.): 3,400 mm, Deburring machine manufactured in 2008. This Costa LEVIGATRICE MSH3 CCVC 1350 features a working width of 1,350 mm and accommodates workpiece thicknesses ranging from 0.5 to 250 mm. It is equipped with inverter-driven motors, a vacuum system, and belt cleaning blowers. If you are looking to get high-quality deburring capabilities, consider the Costa LEVIGATRICE MSH3 CCVC 1350 machine we have for sale. Contact us for further details. • Workpiece thickness range: 0.5–250 mm • Control: PLC • Motors: Inverter-driven • Integrated systems: Vacuum system, belt cleaning blowers, remote assistance module • Working units: Nodozyn Hpepfx Akielh • 1st roller unit diameter: 250 mm • 2nd roller unit diameter: 250 mm • 3rd multi-brush unit diameter: 125 mm • 4th roller unit: Scotch-Brite finishing brush • Condition: Ready for use • Warranty: 3 months • Location: Verona area, Italy Additional equipment • Optional: LAMIER CARJET 210 dust extraction unit • Air flow: 21,000 m³/h • Power: 22 kW • Ask for the price

Condition: used, Brand : Estarta Nledpfx Aszyx Spokish Model: 301 Type: Centerless grinding machine Grinding : (Min.) 1’5mm (Max.) 50 mm Grinding wheel dimension 300x175x125 mm

Condition: excellent (used), Year of construction: 2010, 1,0 ST. gebr. Spritzgiessmaschine Hersteller: NETSTAL Typ: EVOS3500-2000 Baujahr: 2010 Schließkraft: 350 Tonnen Holmabstand: 730 x 730 mm Schneckendurchmesser: 70 mm Spritzteilgewicht: 916 g/PS Ausstattung: Kernzüge 3 x DS / 2 x AS Schnittstelle Roboter Nlodpfx Aksz Iy N Asish

Condition: used, Year of construction: 2003, operating hours: 86,000 h, machine/vehicle number: IntNr231169, STAR CNC Swiss-type lathe SB 16, Year 2003 CNC control: FANUC 18i-TB Technical Data - Number of axes: 6 - Number of spindles: 2 MAIN SPINDLE Nljdpfxoz Irtts Akijh - Max. bar diameter: 16 mm - Z-axis stroke: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - C-axis minimum resolution: 0.001 SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm - C-axis minimum resolution: 0.001 Bar feeder: FMB Minimag 3200/A Bar diameter: 2–16 mm Bar length: 3,200 mm Kraft & Bauer fire suppression system Mayfran chip conveyor Operating manual included The machine can be powered up and inspected by appointment. Technical data and specifications subject to change and prior sale; errors excepted!

Condition: used, clear span: 2,705 mm, load per truss pair (max.): 1,200 kg, Technical data for the pallet racking beam: Racking system: Arestant Type: AS Included in the scope of delivery: 01x Pallet racking beam, used Material color: orange Box profile: 80 x 40 mm Connectors: 4 HK (hooks) Clear width: 2,705 mm Max. load per pair of beams: 1,200 kg, with evenly distributed load. (Note the field load) Njdpfez Aya Tex Akiolh 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 2,705 mm, load per truss pair (max.): 1,200 kg, Technical data for the pallet racking crossbar: Racking system: Arestant Type: AS Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: orange Nsdpfx Asz Aybdskijlh Box profile: 80 x 40 mm Agraffe: 4 HK (hooks) Clear width: 2,705 mm Design: Head crossbar Max. load per crossbar pair: 1,200 kg, with evenly distributed load. (Note the field load) 02x Locking pins, used Design: Fully galvanized For securing the longitudinal supports against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T with loading magazine Iemca Nsdpfx Aksz Hccijiolh CH 220/32 Year of manufacture: 1998 Technical data: Spindle bore: 16 mm Spindle travel: 140 mm Main spindle speed: 500 - 12,000 rpm Counter spindle speed: 500 - 8,000 rpm Speed: driven tools: 0 - 4,000 rpm (remaining data see photos) Approximately 6 months ago, the counter spindle was fitted with new bearings. The machine can be inspected while in operation and under power.

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop Nsdpjxn Rrqjfx Akislh - Documentation - 400V

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used Njdsxnqauepfx Akielh For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 30,003,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Nodpownn Apefx Akielh Horizontal stainless steel tanks – 2 units. Manhole at the front 2.5" outlet at the end. AISI 304.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. Nljdjyug Hxjpfx Akieh The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Nedpfxeyug R Re Akielh The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Year of construction: 2013, condition: used, Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Njdpfxjy Spvlj Akijlh Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: new, sheet width 1070 mm plate thickness 9.0 / 10,0 mm distance between columns 1070 mm Njdjw In A Ispfx Akiolh diameter of upper rolls 190 mm pre-bending capacity 9,0 mm connected load 5,3 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Year of construction: 2026, condition: new, Number of drawer 11 Stk. weight ca. 150 kg table surface area 1370 x 515 mm work height max. 1110 mm range L-W-H ca. 1380 x 550 x 1110 mm Nedpfexaa Nijx Akislh Manufacturer's recommended price approx. 8.000 euros Tool range: 390 pieces Special price on request!! Equipment: - mobile tool trolley including wooden worktop - robust and stable construction - aluminum drawer handles - 11x high-quality drawers - 9x drawers with equipment - including 390-piece tool range (!!) - Color = glossy green - 2x rigid castors / 2x steerable castors - including parking brake - central locking system

Condition: used, Year of construction: 2003, Technical details: x-travel: 800 mm y-travel: 400 mm z-travel: 350 mm total power requirement: 44 kW weight of the machine ca.: 8,8 t dimensions of the machine ca.: 6,1 x 4,1 x 3,3 m tool taper: HSK63 Nedsuqq Uqopfx Akijlh number of spindle speeds: 36-12.000 Number of tools: 2 x 21 St. rotary table diameter: 1340 mm

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Nljdpfx Ajy D Nicskijh Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm speeds 10.000 U/min c-axis 0,01° ° rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB. Nlsdszrh Ecepfx Akieh

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: emergency stop, Extensive recycling and sorting plant with conveying technology, sorting technology, and steel structures Due to a planned restructuring of our recycling facility, we are offering extensive parts of our existing recycling and sorting plant for sale. The plant consists of two processing lines and includes a variety of different conveyor belt systems, sorting technology, and the associated steel structures and supporting frameworks. The scope of sale includes, among other things: Conveying technology: Chain belt conveyors Slider belt conveyors Trough belt conveyors Articulated conveyors Numerous other conveyor belts in various sizes and designs Sorting and plant technology: 3 TOMRA/TITECH NIR sorting machines (1000, 1400, and 2000) Separation drum Belt scales Sorting cabin for manual sorting Control room Steel structures and other plant parts: Steel structures and supporting frames Substructures and platforms Walkways and connecting structures Ventilation and heating system Dust extraction system from NESTRO Other existing plant components and accessories upon agreement The components offered come from a recycling and sorting plant for the processing of commercial waste and the production of alternative fuels (EBS). Nlodpsz R Dcgsfx Akijh Due to the extensive plant inventory and the large number of conveyor belts and individual components, we have deliberately refrained from providing a detailed list of all technical data. We strongly recommend a personal on-site inspection. Interested parties will have the opportunity to gain a comprehensive overview of the entire plant, the available components, and their actual condition. Further information: Location: Munich, Germany Inspection: By prior appointment Planned plant dismantling: From January 2027 Sale: Preferably as a complete package Price: On request If you are seriously interested in purchasing, we look forward to hearing from you and would be happy to arrange an inspection appointment.

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. Nodpfxsu Niu Us Akielh The table is tiltable. *

Condition: good (used), Steel beam, HEB steel beam, I-beam, IPB steel beam, steel column -Steel beam: HEB 140 mm with head and base plate -Total length: 4280 mm -Footplate: 300 x 300 x 25 mm -Head plate: 200 x 250 x 20 mm -Beam width: 140 mm -Beam depth: 140 mm -Flange thickness: 12 mm -Floor thickness: 7 mm Nlodpfx Akow Du Hyjioh -Condition: good, as shown in the pictures -Number: 26 steel beams available -Price: per piece -Weight: 171 kg/piece

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. The machine has only 2500 operating hours and is in good condition. Nlsdpfezx Tgrex Akijh Further details can be found in the data sheet. If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, empty load weight: 8,000 kg, maximum load weight: 80,000 kg, overall weight: 88,000 kg, axle configuration: 4x2, first registration: 11/2024, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,400 mm, loading space height: 1,100 mm, suspension: hydraulics, color: light blue, Year of construction: 2025, operation weight: 88,000 kg, Heavy-duty industrial transport trailer with hydraulic lift eight axles that hydraulically raise and lower the trailer via a control valve all-wheel steering can be coupled on both sides, at front and rear Nlodpfxjva E Tkj Akijh transport floor made of 50 mm Douglas fir or without floor according to customer requirements optional with hand brake or air brake system optional lighting system on both sides further information available upon request.