Used Knuth Abs 325 S Nc for sale (72,212)

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2010, next inspection (TÜV): 04/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2010, Equipment: ABS, In accordance with our General Terms and Conditions, and without any warranty or guarantee, we are pleased to offer you the following vehicle without obligation and subject to prior sale, errors, or typographical mistakes: Kraker 92 cbm Moving Floor Trailer (Vehicle No. 109) First registration: 12.03.2010 Type: CF 200 Perm. total weight: 35,000 kg Dimensions: Length 14,010 mm x Width 2,550 mm x Height 3,800 mm Loading volume: 92 cbm TÜV valid until 04/2026 Sliding tarpaulin, platform Portal doors split 1/2 + 1/2 at the rear Clean floor and end sections Remote control for moving floor Cargo Floor system 2 x LED work lights above drop supports Redjyv Tknjpfx Afnet Drop supports BPW axles 1st axle lift Tyres: 385/65R22.5 (1st approx. 40/50%, 2nd approx. 60/40%, 3rd approx. 30/70%) Wheel chock 1 pair of LED work lights behind the 3rd axle WABCO ABS Air suspension Price: €14,000.00 (net) All information is provided without any guarantee or warranty. Our General Terms and Conditions apply. The place of jurisdiction for both parties up to a disputed amount of €100,000 is the local court of Ludwigslust; for higher disputed amounts, the regional court of Schwerin. Subject to errors, misprints, and prior sale.

Condition: new, Year of construction: 2024, Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm Machine is suitable to the pass and feed grinding, hardened and ground Guide Rjdpfxsdlgq Uj Afnst pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rule disc. Equipment of electrical, predominantly with Siemens components, electrical cabinet in Germany built up, GC 1810-NC stepper motor with Siemens S7 control for grooving and extra movement. Very economic price / performance ratio

Condition: like new (used), Year of construction: 2017, Used automatic bandsaw MEP Shark 332 nc 5.0 Blade dimensions: 3320x27x0.9 mm Cutting angle range: -45° to +60° Rjdpoxz Ulbsfx Afnet Blade speed: 15 - 100 m/min Cutting capacity at 0°: - round 300 mm - square 260 mm - rectangular 330x260 mm Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Year of manufacture: 2017 Machine weight: 1150 kg Additional equipment: - special vise to reduce remnants - KIT IoT Industry 4.0 Ready The machine is like new. It has only 515 operating hours.

Condition: used, Year of construction: 1970, faceplate diameter 1400 mm swing diameter 1600 mm Rodpfjyqvuqsx Afnst turning height 1500 mm Control Siemens type 840 D workpiece weight 6500 kg Slide movement vertical 1000 mm turning speeds 10-315 U/min Feed 3600 mm/min The machine was overhauled in 2009. Control: Siemens 840 D The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm Rjdpfx Afeyft S Asnet - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: new, Year of construction: 2026, COSMOS SG 1050 NC precision surface grinding machine with a grinding area of 1000 x 500 x 400 mm, 7.5 kW spindle power, grinding wheel 400 x 100 x 127 mm, automatic grinding cycle, Mitsubishi PLC control, easy and user-friendly operation, including magnetic chuck 1000 x 500 mm with adjustable holding force, automatic dresser mounted on spindle housing with size compensation, water tank with paper band filter, stepless adjustable spindle speed, full enclosure. We are happy to handle installation and on-site training, as well as subsequent service. 12 months warranty, excellent price/performance ratio! Financing and leasing available; we will be happy to provide you with an offer! Redpjhzlm Hjfx Afnet

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 1,000 mm, turning diameter: 500 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 37 W, torque: 1,450 Nm, chuck outer diameter: 315 mm, Equipment: documentation/manual, rotational speed infinitely variable, Voest Alpine Steinel Lathe WNC 500 S x 1000 Turning diameter: 500 mm Rsdpfeydfy Njx Afnjt Turning length: 1000 mm Control system: Sinumerik 810 T-GA 2 2-speed gearbox i = 4 Power: 37 kW at 100% duty cycle Max. turning torque: 1450 Nm Manual tailstock with clamping and coupling Max. speed: 2500 rpm Electronic handwheel For milling operations: hydraulically swiveling servomotor with 720 Nm and max. 18.5 rpm 12-position disc turret with live tooling, max. 3000 rpm at 4 kW Tool holder: VDI 40 Numerous tool holders VDI 40 for internal and external machining as well as live tooling, including some tools – e.g., internal turning tools – otherwise without tools!

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm Rjdpfeyv Nyljx Afnjt capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 350 mm dimensions of saw-band 4640x34,1,1 mm 355 mm sawband speed 15-115 m/min weight of the machine ca. 2800 kg Rsdpfxsyv Nd Rj Afnot dimensions of the machine ca. 3050x2190x2200 mm

Condition: new, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 45 degrees: round 260 mm Redpfxsyv I Sye Afnot capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW vice 340 mm weight 1240 kg dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

Condition: good (used), Year of construction: 2006, operating hours: 4,990 h, load capacity: 1,500 kg, lifting height: 3,250 mm, fuel type: gas, mast type: duplex, construction height: 2,100 mm, Komatsu FG15HT-20R Duplo 325 Sideshift / Fork Positioner LPG 2006 Rodex Hr Imjpfx Afnot Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You can make an appointment to view and/or test drive without obligation. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, empty load weight: 713 kg, maximum load weight: 1,987 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,800 mm, loading space height: 1,800 mm, loading space volume: 9.7 m³, color: white, construction height: 2,380 mm, working width: 2,280 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY! - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,700 kg - Unladen weight: approx. 689 kg - Interior dimensions: 300 x 180 x 180 cm (L x W x H) - Loading sill height: approx. 53 cm - Tires: 185R14C - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - Wooden floor and side walls made of multiplex - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many sturdy cross members, therefore high point load - Continuous side members - Frame very torsion-resistant due to its sturdy construction - 6 lashing brackets recessed inside the side edge - TÜV certified to 1000daN / kg - Interior light - 2 -wing. Rear door lockable with VA espagnolette lock - 2 maneuvering handles at the front - maintenance-free rubber spring axles from BPW - automatic reversing - BPW overrun device and parking brake - very sturdy bolted V-drawbar - 13-pin plug - large safety lighting with reversing light - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel Special equipment included in the price: - ABS 15 mm walls. (extremely smooth coating) - The extremely smooth coating of these panels greatly simplifies any labeling of the trailer Accessories optionally available: ? Rear supports mounted, the pair ? 100km/ approval with wheel shock absorbers ? ? lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. You can pay us in cash or by bank transfer before collection. - Financing or leasing possible - Delivery possible nationwide - All prices include VAT. - Vehicle registration documents can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs declaration possible New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rsdpou Skuzofx Afnet

Condition: new, empty load weight: 940 kg, maximum load weight: 2,560 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,010 mm, loading space width: 1,960 mm, loading space height: 2,100 mm, loading space volume: 16.8 m³, color: white, construction height: 2,770 mm, working width: 2,040 mm, Equipment: ABS, ABS smooth outer walls, hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. ABS smooth outer walls - Type: New vehicle - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 940 kg - Payload: 2.560 kg - Interior dimensions: 401 x 196 x 210 cm (L x W x H) - Overall dimensions: 563 x 204 x 277 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brakes: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h: at extra charge Equipment: - ABS walls, extremely smooth coating for optimum advertising imprint - Wooden floor and side walls Finnish quality - Very sturdy welded steel frame - Frame completely hot-dip galvanized hot-dip galvanized - many stable cross beams therefore high point load - continuous longitudinal beams - frame due to its stable construction - 6 lashing brackets recessed inside in the side edge TÜV certified to 1000daN / kg - interior light - 2 flg. rear door lockable with VA espagnolette lock - 2 maneuvering handles at the front - automatic reverse drive - ALKO overrun device and parking brake - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle - side flap, standard right, mounted at 210 cm high. - Side flap opens flush with the floor (without edge!) Optional accessories available: - Rear supports mounted, the pair - 100km/ approval with wheel shock absorbers - Lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rodpfx Aou Skw Asfnot

Condition: excellent (used), Height 575 cm Width 235 cm Height 230 cm Rodpoumw I Njfx Afnet Approach under a 240 cm container Fan 1 motor 5.5 kW Fan 2 motor 8.6 kW

Condition: used, Year of construction: 2003, weight of the machine ca. 6,6 t control monforts control 2 Rodpfx Aow Saibjfnst centre distance 3010 mm centre height 310 mm tail stock ja cooling ja dimensions of the machine ca. 5000-1600 mmxmmxmm spindle bore 70 mm

Condition: used, Year of construction: 2007, grinding diameter ----- mm Rodpfxowgi Rfs Afnjt grinding length --- mm centre height --- mm oil mist extraction ja serial number 2342-11

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Redpfx Aeul Svlofnet Weight: 1050kg The machine is fully refurbished and tested.

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature shock chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Rsdpfx Aeuzgt Esfnot Temp. range: -40°C to +180°C Dew point range: +5 °C to +89 °C Mains voltage: 400 V Rated current: 32 A Nominal output: 15 kW Refrigerant: R 404 A Year of construction: 1999 Weight: 2720 kg External dimensions: W 3950 x D 1700 x H 2280 mm Chamber: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electric automatic steam humidifier and producer of mineral-free and odorless steam Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Heating voltage: 400 V Output: 6 kW Steam quantity: 8 kg/h Water-cooled condenser Manufacturer: Bitzer Water-cooled Mains voltage: 400 V Rated current: 13 A Nominal capacity: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Y axis working area: 1320 mm Rsdpfx Afsx Swcasnst Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 16 Total number of tool changer positions: 22

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Mitsubishi wire-cut EDM machine FA20-S advance, year 2011, fully functional. Can be inspected under power. Rodpfeylyhkox Afnot

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Redpfx Aox Slm Hjfnjt Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: new, Model Name Rjdpfx Aol Sva Ijfnet SHARK 331-1 NC 5.0 SPIDER

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that Rodpfxolf Tu Uj Afnet to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm Rodpexab S Esfx Afnjt capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 230 mm capacity 90 degrees: flat 230 x 230 mm capacity 90 degrees: square 230 x 230 mm vice 235 mm turning speed range: 15 - 100 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP CNC total power requirement 3.18 kW weight of the machine ca. 1175 kg dimensions of the machine ca. 1980 x 1105 mm * Automatic two-column band saw with a footprint of only 2.5 square meters * * Highest performance in the smallest space * Features : - powerful CNC automatic band saw in two-column design * for cuts at 0° - with Windows-CE based touch screen control * 5.0 - 180° tiltable control panel * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) * enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cylinders . with preloaded recirculating ball bearings * Reduction of mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - feed system with 600 mm stroke is repeatable and cuts all lengths - vertical pair of rollers can cut any type of bar or bundle material - infinitely variable blade speed adjustment from 15 to 100 m/min Rsdsxabq Uspfx Afnst - robust cast iron structure (G25) to compensate for vibrations - Safety housing in accordance with the latest safety regulations . the Machinery Directive EN 13898/2007