Used Kk-Industries Cy 90-15/2.5 Without Motor for sale (72,092)

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Gjdpfx Afswrkctekjbn Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6Details: Hydraulic drive, 6 mm at 90° (fixed) Gbedpfed Ab Icsx Afkon Blade length: 200 mm Notching angle: 90°

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Gjdpfxoh Alh Ho Afksbn Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, sheet length: 3100sheet thickness: 13prebending: 10total power requirements: 15weight approx.: 10messurements (LxWxH): 4,88x1,16x1,18 Illustration Similar Roller diameter (top/bottom): Ø270 mm Bending length: 3,100 mm Maximum sheet thickness for normal bending: 13 mm Maximum sheet thickness for prebending: 10 mm Prebending / bending radius: 8 mm / 10 mm (radius calculated as Ød × 1.5) CE Standard Variable speed Control unit – 7 Touch Screen Conical bending Induction hardened rolls Godpfxsd Ab H Ee Afkebn Side rolls positioning via electronically synchronized PLC Bottom roll rigid mechanically synchronized Safety mechanism for welding on the machine Stress-relieved steel construction body Rolls seated with bearings Top roll hydraulic opening Top and bottom rolls driven by hydraulic motor and planetary gearbox Electrical and hydraulic overload protection Hydraulic pressure adjustable bottom rolls

Condition: new, Laser performance: 6Loading Capacity: 1250precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 15coolant fittings: Wasserkühlerweight approx.: 17500messurements (LxWxH): 4400 x 9500 x 2350 mmMaximum speed: 120pipe diameter: 220Working Area: 2000 x 6000 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  Gbedpfxotwtn Io Afkon - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting Gbodpfx Afovap Tuokon • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 8500messurements (LxWxH): 4650 x 1700 x 1800 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Gedpfx Afsd Ab Hheksbn Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 4.200sheet thickness: 13,0cutting area width: 4200total power requirements: 18,5weight approx.: 13800messurements (LxWxH): 4650 x 2270 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Gedjd Ab Hiepfx Afksbn Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending Gbjdpfx Aod Ab H Rsfkjn - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, messurements (LxWxH): 1,10 x 1,15 x 1.40weight approx.: 1,150total power requirements: 4sheet thickness: 6 mm Details: - Hydraulic drive - Blade length: 200 mm - Adjustable angle: 60° - 140°, 6 mm - Adjustable angle: 30° - 59°, 4 mm Gbjdpfx Afjd Ab Ideksn

Condition: new, pressure: 150bending length: 3050column width: 3050daylight: 590stroke lenght (max.): 300messurements (LxWxH): 4740x2000x2680weight approx.: 9500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Gsdpfx Afod Etf Eekobn

Condition: new, Laser performance: 4Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  Gsdpfx Ajruwbiofkobn - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 12Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Godpfx Aoruwbqefkobn Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Laser performance: 2Loading Capacity: 1250x-travel: 2020y-travel: 4050z-travel: 350precision of position: 0,05repeat accuracy: 0,03Table change time: ca. 10coolant fittings: Wasserkühlerweight approx.: 11500messurements (LxWxH): 4400 x 10000 x 2120 FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  Gedoruwbxopfx Afkobn - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera SPECIFICATIONSVALUEWorking Area2000 x 4000 mmLoading Capacity1200 kgX-Y Axis Travel2020 x 4050 mmZ Axis Travel350 mmX-Y-Z Axis Guideway4 Point Ball CagedX-Y Axis Drive SystemRackZ Axis Drive SystemBallscrewX-Y Axis Speed100 m/minZ Axis Speed30 m/minX-Y Position Accuracy0,05 mmX-Y Repeatability Accuracy0,03 mmTable Change Time10 secLaser SourceRaycus / Han’s / JPTLaser Source Output Power2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC Control SystemFscutLaser Cutting HeadRaytools / BOCI / WSXAssist GassesAir/Oxygen/NitrogenCooling TypeWater CoolingMachine Weight11500 kgMachine Dimensions (WxLxH)4400 x 10000 x 2120 mmGraphic Formatdwg / dxf / stpVoltage380 / 50 HzCertificationsCE / ISOWarranty2 Years

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 2precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Gbsdpfx Afsruwb Hekjn Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: new, pressure: 100Cylinder: horizontal verschiebbarstroke: 350column width: 1050working speed: 2rapid traverse: 28length: 1900width: 850heigth: 2250weight approx.: 1030Horizontally adjustable cylinder: 650- Horizontally movable cylinder – 650 mm Height-adjustable work table – by chain adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English Two working speeds – for precise and efficient operation Godpfx Ajwwngtsfkobn This is a stock photo

Condition: new, pressure: 20Cylinder: nicht beweglichstroke: 350column width: 520working speed: 4retracting speed: 30length: 1200width: 500heigth: 1800weight approx.: 210 Two working speeds – for precise and efficient operation Height-adjustable work table – manually adjustable for flexible use Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Gbedpfswwnhkex Afkjn Operating manual – available in German and English

Condition: new, sheet length: 3.200sheet thickness: 16,0column width: 3100total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4,2x 2,050 x 2100 Gedpfx Aed Ab Hlefkobn Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, messurements (LxWxH): 1520 x 950 x 1780weight approx.: 1,440total power requirements: 4square steel bar: 35round steel: 40cutting pressure: 60throat depth: 220flat steel shear: 200 x 20 oder 300 x 15notching (strenght x width x depth): 10 x 42 x 100punching - round: 28 x 15 oder 38 x 11 oder 110 x 3angle iron cutting 90° or 45°: 120 x 120 x 12 oder 80 x 8  5 working stations  one foot pedal  Gbsdpfxod Ab Hyo Afkon hydraulically driven  table at punching and notching station with gauge  user manual in GERMAN and ENGLISH

Condition: new, pressure: 70Cylinder: nicht beweglichstroke: 350column width: 900working speed: 3length: 1700width: 700heigth: 2100weight approx.: 650rapid traverse: 29 Two working speeds – for precise and efficient operation Height-adjustable work table – by chain adjustable for flexible use Gbjdpfx Ajwwnh Dsfksn Safe two-hand operation – via hand lever and push button Adjustable maximum pressure – can be set individually for different applications Integrated pressure gauge – for accurate monitoring during operation CE-compliant design – manufactured according to current safety standards Operating manual – available in German and English This is a stock photo

Condition: new, Working Area: 2000 x 6000Loading Capacity: 1450x-travel: 2020y-travel: 6050Laser performance: 3precision of position: 0,05repeat accuracy: 0,03weight approx.: 11500messurements (LxWxH): 10000 x 4400 x 2120FLC series is speed, sensibility, reliability and low operating cost fiber laser cutting machine. It is a laser cutting machine with high efficiency and upper segment standards. Can carry up to 30.000 W laser power, so cutting some thick plate, it is a very good choice. For agricultural, textile machinery, food machinery construction machinery, lift manufacturer and other large machinery and equipment manufacturing, usually use FLC fiber laser cutting machine for processing. It is an ideal cutting machine for those who will outsource. Provides easy use blowing, cutting, pause, calibration simulatione, etc. with its wireless remote control. Standard nesting software program, it makes the parts to be cut ready for cutting very quickly without the need for an operator. It also has flycut cutting feature. Since it is a double exchance table, you can continue cutting without waiting. All of our machines are produced in European standards and we have a CE certificate. Our FLC type machines have nozzle cleaning and double camera system. There are 1.5x3 mt, 2x4 mt or 2x6 mt cutting area options. Our laser head has auto focus and Active Anti-collision Function an auto view feature that detects obstacles and moves automatically. Cutting heads have automatic cooling. The bridges we use in all our machines are made of aluminium alloy sheet-plate welding construction type and one piece. The fact that it is one piece ensures that the bridges are rigid and prevents the bridge from maintaining its form and deforming in case of impact, overlap or strain that may be encountered. In addition, thanks to its 3 times lighter structure compared to steel profile bridges, we can output high speeds and accelerations at lower engine Powers. Accesories: - Water cooler   - Control box cooling  - Automatic focus head  - Nesting software   - Touch 19-inch CNC control  -  Cutting on the fly  - Nozzles and lenses including starter kit  Gbjdoruwb Ujpfx Afken - Parts dirt drawers  - Automatic table changer  -  Automatic nozzle cleaning  - CE conformity  - On-site machine training   - Wireless remote access  - Automatic lubrication system - Dual camera

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears Gbsdpfx Aed Eqq Aefksn - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - digital display EURO 858, -- Angular side guide rollers EURO 1,287, -- Double speed STANDARD Brake motor EURO 150, --                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, pressure: 20bending length: 900column width: 900daylight: 325stroke lenght (max.): 150messurements (LxWxH): 1760 x 1280 x 2190 mmweight approx.: 1950motor power: 3,8 Gbjdpfxjd H Hh Ds Afksn

Condition: new, pressure: 60bending length: 2550column width: 2100daylight: 550stroke lenght (max.): 270column throat depth: 450messurements (LxWxH): 3220 x 2250 x 2560weight approx.: 5200motor power: 5,5 Gbjdpfxod I Anno Afken

Condition: used, More technical data on request Godpfx Afol Iir Sskebn