Used Kaeser Screw Compressor – Available Immediately – for sale (39,013)

Condition: excellent (used), Year of construction: 2006, S009758 Fpedpfx Aez D Dtkoivsn PROD. ATLASCOPCO TYPE GA45 PLUS S/N API507879 YEAR 2006 POWER (kW) 45 CAPACITY (m3/min) 7.73 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 17837/35122 2021.10.29 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) no ON TANK no DOCUMENTS no NEW/USED USED

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by Fsdpfx Aozu Aibsivspn limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2008, PROD. MAUGUIERE TYPE MAV400 S/N CAI027542 YEAR 2001 POWER (kW) 30 OUTPUT (m3/min) PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 60238 INVERTER no Fpjdpfoz Eap Dsx Aivsn BUILT-IN DRYER no EXCHANGER no COOLED (AIR/WATER) no ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2007, PROD. CREEMERS TYPE RCD30/8 S/N CAI242107 YEAR 2007 POWER (kW) 30 OUTPUT (m3/min) 3.54 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 10385/17245 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 Fpsdpfx Aez E Ht Noivsn NEW/USED USED

Condition: new, Year of construction: 2010, functionality: fully functional, Oil separator cartridge 6.2010.0 Original Kaeser spare part From stock sale Fpsdpfxsvkfzis Aiven We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), type of cooling: water, Equipment: documentation/manual, type plate available, New Boge S 75-4 LF screw compressor, 5/2026, for sale due to a project being cancelled (new value €50,000), now €20,000. Please note: this is a water-cooled machine. Fpodpfxsz Dpu Ho Aivon

Condition: excellent (used), Year of construction: 2015, operating hours: 21,506 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 388.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Screw compressor, Kaeser BSD75SFC Inverter integrated 37 kW Fpodpfx Aieztr I Djvjn 10 bar 6.47 m3/min Year of manufacture: 2015 Operating hours: 21,506

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,596 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor GA132VSD Atlas Copco Fpjdpox Rwz Tsfx Aivsn Integrated frequency converter 132 kW 8.5 bar 26.06 m³/min

Condition: good (used), Code: 0386 Brand: BOTTARINI AIR KRONE - ITALY Model: KS 22 - CE Standard Silenced screw air-compressor with tank and dryer for craft and industry - CE Standard Features: Palletised design, this means that it can be placed anywhere using a simple transpallet. No bolting down is required. Panel-enclosed design that allows for easy access from all sides for routine maintenance Clearly visible and functional control panel features a pressure gauge, air pressure, running time counter, a digital temperature regulator, and a timer. Light on/off button and fault indicator lights Technical data: Motor power 20 Hp 10 Bar 2 m³/min Air delivery 70 CFM Vertical tank 500 liters Fpedpfxsy Spkij Aiven Dryer Overall dimensions Compressor mm 700 x 700 x 1000 h - 210 kg Overall dimensions Dryer mm 500 x 500 x 600 h - Kg 50

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Fpedpfx Aow Rd Avsivjn Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Type: S220 Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.

Condition: like new (used), Year of manufacture: 2023 Type: SMART 7 Serial number: 202210301 Fodozwxp Aopfx Aivjpn Operating hours: 1,160 h Load hours: 452 h Pressure: 7.5 bar Flow rate: 1,060 l/min Connection: 7.5 kW Pressure vessel Pressure: 13.8 bar Temperature: 0 to 150°C Condition: as new Weight: 240 kg Dimensions: 900 x 600 x 1,040 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Fpedezvllnepfx Aiven Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384

Condition: excellent (used), Year of construction: 1999, PROD. GRASSAIR TYPE S88.07 S/N 88070799n416 YEAR 1999 POWER (kW) 30 CAPACITY (m3/min) 4.50 PRESSURE (bar) N/A HOURS (RUNNING/TOTAL) 6437/10922 INVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Fedoz Dh Uxepfx Aivjpn CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA45VSDFF air compressor, API481000, water-cooled MANUF. ATLASCOPCO TYPE GA45VSDFF S/N API481000 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.61 PD (bar) 12.75 HOURS (SERVICE/TOTAL) Fpjdpoz D D Hqefx Aiven VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER yes HEAT EXCHANGER yes COOLED (AIR/WATER) water WITH TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Year of construction: 2022, feed pressure 10 bar liter capacity 2,71 m³ / min motor speeds: 3000 U/min dimensions 1300 x 1000 x 1900 mm total power requirement 18,5 kW weight of the machine ca. 500 kg Features: - Focus Control 2.0 control system Fpodpfx Aiowq Sz Isvsn - Network pressure sensor - Belt-driven drive system - Soundproofed

Condition: excellent (used), Year of construction: 2010, S016246 S/N CAI406542 YEAR 2010 POWER (kW) 11 CAPACITY (m3/min) 1.25 PRESSURE (bar) 12.75 HOURS (RUNNING/TOTAL) 18576 FREQUENCY CONVERTER no BUILT-IN DRYER yes, R134a 0.48kg EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Fodpfx Asz Dgcusivjpn NEW/USED USED

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Table tilt via rack and handwheel TECHNICAL DATA Fodpfx Aisvk Sfbevspn Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fedpey Ehcdefx Aivspn Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: AII 298286, overall weight: 585 kg, Speed-controlled screw compressor, Atlas Copco GA 30 VSD FF, with integrated refrigeration dryer, year of manufacture 2003. Serial No. AII 298286, rated power 30 kW, weight 585 kg. Maximum operating pressure 12.75 bar, maximum delivery rate 75 l/s (4.5 m³/min). Fpsdpfx Aez A Un Asivsn Control system: Atlas Copco Elektronikon II. Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: excellent (used), S015019 PROD. BOGE TYPE C25 FD S/N 5068559 YEAR 2013 POWER (kW) 18.5 + 0.75kW CAPACITY (m3/min) 3.10 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 34833 FREQUENCY CONVERTER yes Fsdpfx Aijz Dwd Nsvepn BUILT-IN DRYER yes HEAT EXCHANGER yes COOLED BY (AIR/WATER) air/water ON TANK no DOCUMENTS no NEW/USED USED

Condition: new, Year of construction: 2026, PROD. MARK TYPE MSM3 D 200 S/N ITJ1061384 YEAR 2026 POWER (kW) 3 OUTPUT (m3/min) 0.33 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 INVERTER NO BUILT-IN DRYER YES, R513a, 0.17 kg EXCHANGER NO COOLED BY (AIR/WATER) Air WITH TANK YES, 200 L DOCUMENTS YES Fpjdpfxjz I Riye Aivjn New/Used NEW

Condition: excellent (used), Year of construction: 2016, S016860 PROD. ATLASCOPCO TYPE GA160 S/N APF208686 Fpsdpfx Aisz Dgbqsvsn YEAR 2016 POWER (kW) 164 CAPACITY (m3/min) 21 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 3 NEW/USED USED

Condition: as good as new (ex-display), Compressor, rotary screw compressor, high pressure gas compressor, industrial refrigeration compressor, Howden MK1S,Used machine Manufacturer: Howden Compressors Limited Type: MK1S WRViHS/365193/58/028 Serial No: N12533 Fedpfx Aioy Snk Ujvopn -max. inlet pressure: 2.9 bar g -max. working pressure (outlet): 35.5 bar g -casing design pressure: 42.0 bar g -hydraulic test pressure: 63.0 bar g -max. continuous speed: 2970 RPM -setting: variable volume ratio (Vi setting) -place of manufacture: Glasgow, G52 1BE

Condition: excellent (used), Year of construction: 2023, volume flow: 1.06 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, pressure: 10 bar, SCC SMART 7 screw compressor 7.5 kW motor Fodpfx Aijz N Ah Eovspn Capacity: 1.06 m³/min Pressure: 10 bar Year of manufacture: 2023 Operating hours: 902 Compressor has been serviced, with filters and oil changed.

Condition: new, Year of construction: 2014, functionality: fully functional, Oil separator cartridge 6.2013.0 Original Kaeser spare part Fsdpfsvkfzcox Aivspn Suitable for Kaeser compressors: CS 75, 76, 90, 91, 120, 121 From stock We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.