Used Hydraulic Filter for sale (19,811)

Condition: used, Technical details: tank capacity: - l total power requirement: 2,2 kw Nsdpfsu Nz Ugex Amnslb volume capacity: max: 1329 m³/h filter: Patronenfilter air-pressure connection: 6 bar weight of the machine approx.: 88 kg dimensions L x W x H: 1,15 x 0,60 x 2,35 m Cartridge filter/ smoke gas separator with spark pre-separator (H2O) for combustible dusts. Sheet metal construction. Pressure 2,250 Pa Temperature max. 65°C Compressed air tank size Ø 150x 480mm with 1x hose connection Ø 10mm and 1x screw connection inside with shut-off valve 1/2 inch Intake Ø 200mm, floor height = 940mm Exhaust air on ceiling side, 500 x 500mm with tile filter Spark pre-separator medium water Dust collection container size L:360 x W:465 x H:280mm, floor mounting (removable) *

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Nedpfx Amsu N A Eaonolb Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) Nlodpfxsvc Awxo Amnjb *

Year of construction: 1998, condition: used, Technical details: air flow rate: 1200 m³/h suction stud diamter: 360 x 350 mm drive power: 0,11 kW connected load: 380V V Nsdpfxswfr Dlj Amnolb weight: - kg total power requirement: 0,59 kW dimensions L x W x H: 600 x 550 x 560 mm

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW Nsdpevc Ax Njfx Amnslb weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Technical details: Nsdpju N Eriofx Amnelb feed pressure: 60 bar drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar drive power: 11 kW 5 hydraulic power units for sale. - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Prices vary according to aggregate size. *

Condition: used, Year of construction: 2001, Technical details: pressure capacity: 145 bar charging voltage: 24 V / 12 V V weight: 185 kg dimensions L x W x H: 1,0 x 0,5 x 0,8 m Hydraulic pressure 145 bar Nsdpfx Aju N E Hgemnslb Input 230 v / AC Output 12 V / 200A or 24 v / 100A *

Condition: used, Technical details: tank capacity: 17 l motor: 1380 Flow rate: 2,54 l / min pressure capacity: : 340 und Pw: 310 bar total power requirement: ca. 1,5 kW weight: ca. 21 kg dimensions L x W x H: 0,5 x 0,2 x 0,6 m Nlsdpfxju N E H He Amnob 4x directional valve 1x pressure relief valve 2x pressure switch 1x pressure gauge 2x bubble accumulator *

Condition: used, Year of construction: 1993, Technical details: Nodpfxsu Rni Hs Amnolb sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm Nlsdpfsu Nfp Iex Amnjb height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm Njdpeu Nfudjfx Amnslb daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: tank capacity: 800 l Nedpfxeu N Ervo Amnjlb overpressure : zul./max.=ca.100 bar motor: 5 weight: ca. 2,4 t Hydraulic Pressure Storage Plant - aggregate= LxWxH=2,48x1,73x2,13m - oil tank :LxWxH=2,0x1,1x0,5m - 5 motors ( from 3,8 up to 66 kW) - coolant: nitrogen - 5 pumps iD. *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades Nledpfx Amju Icpcjneb *

Condition: used, mileage: 690,027 km, power: 368 kW (500.34 HP), first registration: 01/2019, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,960 mm, total width: 2,550 mm, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, lane keeping assist, navigation system, parking heater, retarder, seat heater, spoiler, traction control, = Additional options and equipment = - Adaptive cruise control Nlsdpfoy Sn Rhex Amnsb - Electrically folding exterior mirrors - Passenger seat - Roof spoiler - Driver's cab - Remote controlled central locking - Heater - Tipping hydraulics - Automatic climate control - Air suspension - Engine brake - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Lane keeping assist - Auxiliary heater (parking heater) - Stationary air conditioning - Blind spot mirror - Two separate beds = Remarks = Tipping hydraulics = Further information = Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steered; Left tire tread depth: 50%; Right tire tread depth: 50%; Suspension: Leaf spring Rear axle: Tire size: 315/80R22.5; Twin tires; Left inner tread depth: 50%; Left outer tread depth: 50%; Right inner tread depth: 50%; Right outer tread depth: 50%; Suspension: Air suspension Number of cylinders: 6 Unladen weight: 8,470 kg Payload: 11,030 kg Gross vehicle weight (GVW): 19,500 kg APK (Dutch MOT): valid until 07.2026 Type number: R500 / 4X2 / RETARDER / HYDRAULIC = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), We speak Russian. We strive to provide correct information, but no rights can be derived from the texts provided.

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW Nsdpfx Aol Nbqcsmnjlb mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Hydr. hacksaw (Made in Croatia) Type BS 320 Year of manufacture approx. 1980 Sawing area round Ø 320 mm sawing area square 280 x 280 mm Saw blade 550 x 45 x 2,25 mm Material infeed height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. motor power 1,8 and 2,4 kW pole changeable Mains connection 400 Volt, Hz - Miter adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt steps - Hydraulic saw bow lowering - hydraulic cutting pressure adjustment via throttle valve - Coolant device in machine base Space requirement hacksaw L x W x H 1900 x 1350 x 1500 mm width without fence 800 mm Nlodpolqadhofx Amnsb weight approx. 750 kg good condition

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Nodpfou D Tz Usx Amnslb Very good condition 3 pieces available, price per piece

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Njdpjv Ev Dqefx Amnjlb Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: used, axle configuration: 3 axles, first registration: 07/2024, total length: 13,610 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R22.5, wheelbase: 9,460 mm, color: blue, Year of construction: 2024, Dutch registration SAF axles Friction-steered Reverse with remote control Wideners Wide marker boards Stainless steel toolboxes Toolbox on the neck Spare wheel = Further Information = Axle configuration Tyre size: 245/70R22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tyres; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Middle axle: Twin tyres; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Rear axle: Twin tyres; steered; left inner tread: 50%; left outer tread: 50%; right inner tread: 50%; right outer tread: 50% Weights Unladen weight: 9,580 kg Payload: 41,420 kg Gross Vehicle Weight: 51,000 kg Maintenance APK (Dutch roadworthiness inspection): valid until 07/2026 Nedoy Sm Thjpfx Amnjlb Identification Type number: 3ASD-3A / 1X LIFT-AXLE / ELECTRI = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki We strive to provide accurate information, but no rights can be derived from the information provided.

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Nlsdpfx Amer R Ewloneb Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Nlsdpfx Amjdzp Trensb Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW Nledoq A I Upjpfx Amnsb - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Nledpfx Aoyupulemneb Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) Nlsdpfjwva I Hex Amnjb - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Njdpfx Aevq Rtksmnelb Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.