Used Homag Edge Banders Homag Kal310/6/A20 2013 for sale (53,366)

Condition: used, plate thickness 6 mm blade length 200 mm angle adjustable from - to fest 90 Grad table surface area 750 x 500 mm total power requirement 3,0 kW weight of the machine ca. 0,62 t dimensions 1,2 x 0,8 x 1,2 m Combination machine: edging and notching - foot switch - Emergency stop switch - Documentation Dcodpfozkbmwox Adhon

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 3 / 12 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x kW 4,0) Glueing Unit (Hot Melt Glue & PUR-Glue) 283.1513 Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels) No. 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Rough Trimming unit 08.055 (2 x kW 1,0) Copying unit by N.C (fine and contour trimming) SKF-L (2 x kW 0,18) +(2 x kW 0,4) Profile edge scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.617-2 ( 2 x kW 0,18) Dcoded Nt N Hopfx Adhon Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270° OPTIONAL: Panels in-feed system 65.152 (Sliding table, mm 500 x 500) Panels Return System "GELDMEIER" Mod. ? (code Z02009)

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine Dcedpfx Adsb Sc Stshjn -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: PUR Corner Rounding Unit: yes Dedpfxoyilxme Adhocn Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a Dcedpougpwnefx Adhsn cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 2016, functionality: fully functional, 400 kVA transformer station, year of manufacture 2016, make Scheidt; 400 kVA oil/hermetic transformer, make CG Power, year of manufacture 2013, type DECkC0, 20 kV ± 2x2.5% / 400V with HV plug-in bushing; including switchgear. Dcedsx Dahtopfx Adhsn

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 2 mm, feed rate X-axis: 12 m/min, total height: 1,300 mm, total length: 4,500 mm, total width: 650 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, TECHNICAL DATA Overall dimensions (mm): 4500*650*1300 mm Total power: 9.37 kW Dcjdpfxezhvgge Adhjn Feed rate: 12 m/min Thickness of the component to be veneered: 10–45 mm Thickness of the veneer: 0.8–2 mm Length of the component to be veneered: ≥80 mm Width of the component to be veneered: ≥60 mm Working pressure: 0.6 MPa Weight: 1300 kg SPECIFICATIONS: Delta touchscreen (7 inches) Preliminary milling Gluing Edge trimming unit Finishing milling Corner rounding Radius sanding Polishing unit Frequency inverter

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Dsdpfx Aju Racxedhecn Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: refurbished (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3,0 - 12,0 Panels thickness (min/max) mm 8 - 60 Dcodpfxsdfgfpj Adhsn Numerical Control ICOS Feeding speed (fixed) m/min 16 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (2 x kW 3,0) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x kW 0,66) Fine Trimming unit 08.055 (2 x kW 1) - 30° Multi Function Unit (Profile contour Trimming unit) 08.346 (2 x kW 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 (2 x kW 0,25) Free space

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the piping shown in the image, connected to 200mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Upper pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing section with automatic edge feeding for roll material up to 3 mm Pressing zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, beveling, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual as a folder All indexable inserts of the milling units and trimming blades have been replaced or re-sharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profile milling unit has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses have been replaced. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Dodpfezn Afpox Adhocn Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Dcodott Iudepfx Adhsn

Year of construction: 2010, condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Dedpohw Db Iefx Adhjcn Radius R2mm. HSK63 holder. Available immediately.

Condition: used, functionality: fully functional, machine/vehicle number: 2-017-95-2630, Motor spindle for CNC machine Weeke BOF and BAZ. - Available 7 pcs (in that quantity 2 pcs with C axis); - 12000 - 24000 Rpm; Dcedoxnbmfspfx Adhen - 16kW - HSK 63

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Dcodpfx Asytr Hbsdhon Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG Dcsdpfx Adjb Uhk Ushjn - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Year of manufacture: 2007 Dcodpfxsy Akytj Adhen Voltage: 400 V Power consumption: 46 A Fuse: 63 A Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for 1st, 3rd, 4th, 5th, 7th, and 8th unit) Tools included: No (for 6th unit)

Condition: used, functionality: unexamined, Ferwood code: AGG0145 - Manufacturer code: 2-056-10-3300 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Dodpownrdqsfx Adhscn

Condition: excellent (used), LINE (half line) of Double-side Sizing-Milling & Edge Banding, with max working width mm 2500, with automatic fast handling system. Composed of the following machines: Dsdpfernrrbjx Adhjcn A) DOUBLE LOADER (BRIDGE-FRAME) "BARGSTEDT" TBH 270 / D / 25 / 12 B) TURNING DEVICE FOR PANELS (LENGTHWISE TO CROSSWISE) "HOMAG" TDL /310 /25 /12 C) Double-side SIZING and EDGE BANDING machine "HOMAG" Mod. KFL 526/9/A3/25 D) TURNING DEVICE FOR PANELS (CROSSWISE TO LENGTHWISE) "HOMAG" TDL 510/25/12 E) DOUBLE UNLOADER (BRIDGE-FRAME) "BARGSTEDT" TSH 270 / D / 25 / 12 With LINE CONTROLLER - WOODLINE CONTROL PC52

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Dcedpfey S Edxex Adhen Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, mileage: 632,800 km, power: 213 kW (289.60 HP), first registration: 10/2014, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, MAN A37 Lion’s City NL 293 Excellent condition vehicle from a German bus operator. Engine: MAN Euro Emission Standard: Euro 6 Transmission: Automatic Seats: 37+1 (high/fixed) Standing places: 56 Safety * Retarder * ABS, ASR, EBS * Fog lights Passenger compartment * Auxiliary heater * Air conditioning * Driver’s microphone * Stroller space * Wheelchair ramp * Wheelchair space * 1 folding seat * Stop request system * 2 electrically operated roof hatches * 2 folding windows Exterior * LED matrix lighting system by Lawo with control unit * 2 x double-width doors (inward-swinging) * Kneeling function, raising function Driver’s area * Radio CD MP3 * Sun visor * Electrically adjustable exterior mirrors Dodpfx Ajz Exp Asdhscn * Fog lights * USB charging ports Other * Wheel covers Errors and omissions excepted. Images and text may differ from the vehicle. All information without guarantee. Inspection possible at any time by prior appointment! For further information: also available via WhatsApp. Information in Polish: WhatsApp. Your French-speaking contact: Georges Spengelin

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Djdpozuyh Uefx Adhecn Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Djdoyq Avhspfx Adhecn FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, edge thickness (max.): 3 mm, workpiece weight (max.): 50 kg, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (roll stock) - Material thickness: 0.4 - 3 mm Maximum edge cross-sectional area (plastic): 135 mm Maximum edge cross-sectional area (veneer): 100 mm Maximum roll diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edging up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edging up to 3 mm Cross processing speed: up to 30 m/min for panel sizing Cross processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Dcsdpfx Adsx Ezz Hohjn Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separating agent spray unit Glue application unit A3 with 2 rollers Profile milling unit FF12 top/bottom with motors 12,000 rpm Finishing unit FA11 top/bottom Steplessly adjustable positioning cams with a maximum cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Dcedozp R I Iepfx Adhsn terms of payment: 100% prior to delivery

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Djdpfxozxn Ecs Adhocn Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA