Used Holzhäuer Cone Splitter Log Splitter Ks-T4 for sale (5,808)

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: Lasdpfx Afsy D Rxrjkjf - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: good (used), Year of construction: 1994, Working width 500 mm Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Lsdpfx Aezfqknjfkoaf Number of knives 4 St. Feed speed 7/14 m/min. machine weight ab. 1050 kg

Condition: used, maximum load weight: 14,225 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 6,611 mm, loading space height: 4,000 mm, total width: 8,511 mm, total height: 2,550 mm, Equipment: ABS, DOLL - 2-Axle Short Timber Trailer in "Bogie" Design, Type A2G-10L500 (A131) Technical Data: Dimensions: Trailer overall length: 8,511 mm (with drawbar length 1,900 mm) Loading length: 6,611 mm Front overhang: 760 mm Rear overhang: 856 mm Vehicle width: 2,550 mm Wheelbase: 4,995 mm Loading height, top edge of frame, loaded: 1,187 mm (with tire size 275/70 R 22.5) Overall height: max. 4,000 mm Weights: Permissible total weight: 18,000 kg Axle load (2 x 9t): 18,000 kg (technical 24,000 kg) Unladen weight approx.: 3,350 kg (without bogie and stakes) Payload approx.: 14,650 kg Standard equipment: A2G DOLL - 2-axle short timber trailer in "bogie" design - straight top chord Stable welded construction with 2 longitudinal beams and a straight top chord. - Bogie with ball bearing swivel - 1 piece chock with bracket - Lateral impact protection according to ECE?R 73 Rear underrun protection: Aluminum underrun protection, according to ECE?R 58 All lighting and license plate holder protected and integrated, according to ECE?R 48 Wheel covers: Full plastic fenders above the wheels, mounted at the front on the bogie and at the rear on the main frame, with DOLL splash guards behind the axles. Frame cover: Continuous aluminum duet sheet cover (3/5 mm) screwed between the top chords. Drawbar GZY27: Drawbar with silent block bearings and drawbar support, type GZY 27 Drawbar eye: Length: D-value: Maximum front axle load: Maximum total weight: Ø 50 mm (heavy-duty ECE) 1,900 mm 125 kN 10 t 27 t Connection cable to the truck: Laid along the drawbar (air, light, ABS). Cable routing: Protected routing of brake and electrical cables on the main frame. Clamp bracket: Inclined clamp bracket at the front, reinforced. Splash guard: Continuous splash guard at the end of the vehicle, pivoting, with ?DOLL? logo. Chassis / Frame: 12 t Axle: 2 single axles, manufacturer BPW, 12 t with drum brakes, both axles with ABS and automatic slack adjusters, including safety cables. Suspension type SL, with 2 x 43mm trailing arm spring. Air suspension: Air suspension without lifting and lowering. Weight indicator without Smartboard: EBS-E weight indicator for trailers with air suspension, consisting of 2 pressure sensors for determining the axle loads. The axle loads are transmitted to the truck via CAN-BUS, for weight display on the truck display. (Truck equipment not included in the scope of delivery!) Braking system: Electronically controlled 2-line pneumatic braking system (EBS-E). Brand-name manufacturer, load-dependent, including ABS. EBS system completely installed, spring-loaded parking brake, operable by means of a parking release safety valve, and from the driver's cab (truck-side installation not included in the scope of delivery!) Air tank made of aluminum. Brake connection: 1 piece Duomatic coupling head. Tires: Tires (85.50 kg / piece): 8 tires 275/70 R 22.5, manufacturer Continental Hybrid HS3 on steel rim 8.25 x 22.5. Bogie / Stakes: Bogie: 6 pieces ECCO steel bogie body with 2° stake inclination type Kombi 7 (80.0 kg), with bracket - clamp attachment mounted on the main frame. Including 1 pair of hooks for load securing. Stakes: ECCO aluminum stakes type ALU 7, screwable, fixed-length stake. Basic height 2,550 mm (21.0 kg). Lodpfx Afozq Hbgekjaf Maximum loading capacity per stake pair 7t. Electrical equipment / Lighting: Lighting system: Conventional wiring of the trailer to increase the quality standard. - Long service life - Insensitive to moisture and dirt - Minimal mainten

Condition: used, Pilous CTR750EV bandsaw, very good condition, 5.5 kW, S6 7.5 kW, 3.6 m cutting length, 460 kg Lsdpewzzf Djfx Afksaf Price changes reserved, errors, misprints, and typographical mistakes excepted.

Condition: used, machine/vehicle number: G-BBS112186P, Hydraulic log band saw Forestor CTR800H including the following accessories: 3m extension section, chain log turner, hydraulically rotatable log lifter, hydraulic log lifter with drive, saw band tensioning device, 11 kW motor, pre-cutting device, ammeter, saw band guide electrically adjustable, Lasdpfovw Eb Asx Afkef LG Automat, irrigation pump with automatic switch-on Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, maximum load weight: 32,600 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting timber and long materials. * Chassis length approx. 13510 mm (head frame-head frame) * Chassis width approx. 2540 mm (outer frame-outer frame) * Sturdy steel bulkhead approx. 2,500 mm high * 16x OptiPa A7 one-piece aluminum stanchions * Steel floor 4/6 mm tear plate cover * Technically permissible total weight 43,000 kg * Unloaded ride height approx. 1400 mm with saddle height 1200 mm * Max. fifth wheel load approx. 16000 kg * 2" kingpin in accordance with SAE standard, interchangeable from below * 16x Optipa quick-release fastener system embedded in the outer frame and 8x as storage for stanchions distributed centrally over the entire length * 3x 9t axle with large disc brake and air suspension unit for 9t load capacity each Total lift approx. 180 mm * Lifting and lowering device with rotary slide valve * Axle lift first axle, automatic function, with starting aid * Smartboard/TIM/Infocenter * EBS brake system make Knorr or Wabco of our choice with Roll Stability program * Brand tires 385/65 R 22.5 Ljdpfx Afon Hrrijkoaf * LED work lights * LED lighting system * 2x toolbox * CDP with zinc phosphating plus powder, maximum corrosion protection (only if powder paint is available) For further information please do not hesitate to contact us

Condition: used, Log feeder for medium-sized logs Lodpfoy Szwzox Afksaf 6 chains 3 carriers

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg Lajdpfx Afeztanrjkof ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: used, mileage: 800,000 km, power: 375 kW (509.86 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special equipment: Front axle load 9.0 t, Audio system: CD radio (Bluetooth), Right exterior mirror with maneuvering position, 220 Ah battery, CB radio, Aluminum compressed air tank, Additional compressed air tank, Air horn, Electrical pre-wiring in the cab 24V / 100 A, Cab: steel-sprung, Comfort, Suspension: Front springs 9.0 t, 4 leaves, Additional parking brake on the front axle, Vehicle without rear window, 16-speed gearbox - Type: G 280-16, Rear axle differential gear 300, 12.7 cm info display with video function, Interior filter for construction site vehicles, Communication interface, Fuel tank: 390 L, Aluminum, left, Alloy wheels 11.75x22.5 (ALCOA Dura-Bright, on front axle), Alloy wheels 9.00x22.5 (ALCOA Dura-Bright), Air intake behind the cab, Reinforced engine brake, Reinforced engine compartment encapsulation, Auxiliary drive MB 123-10c, Parameterizable special module, Spare wheel, Acoustic reversing warning (external warning signal), Seats in the cab: Driver's seat, sprung comfort seat, Seats in the cab: Driver's seat backrest foldable, Exterior sun visor, Sunshade roller for side window, driver's door, Voltage converter 24V / 12V 10 A, Stowage flap outside left, 12V socket in the co-driver's footwell, Additional 24V socket in the co-driver's footwell, Turbo-retarder coupling, Preparation for reversing camera, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x4, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Arocs, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Compressed air connection in the cab, Cab: Width 2.30 m, Cab: Movable cab entry, Cab: Tilting mechanism hydraulic, Cab: M ClassicSpace, Cab floor with engine tunnel 170 mm, Cab: Mounting height 600 mm, Suspension: Leaf / Air, Power windows, Windshield tinted, Generator 100 A, Urea tank (AdBlue): 60 L, Manually operated roof hatch (steel), Interior filter: Pollen filter, Body / Superstructure: Tipper, Steering assist pump unregulated, Air compressor 2-cylinder, Heated air dryer, Engine 12.8 L - 375 kW R6 Diesel (OM 471), Frame lowering without bellow residual pressure regulation, Ramp mirrors, Waste heat recovery, Disc brakes with full protection, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Co-driver's functional seat, Stabilizer front axle, Cab socket 24V, Tachograph / EC control unit, Rear underrun protection fixed, Preparation for toll collection, Front axle straight, Water pump regulated, Permissible gross weight 26.0 t, Oil cooler gearbox * Mileage: approx. 800,000 km * Engine: OM471 Diesel Ljdpfx Afjzu U H Eokeaf * Power: 375 kW / 510 hp * Displacement: 12,809 ccm * Transmission: Automatic transmission * Retarder: available * Axles: 6x4 * Front: Leaf suspension * Rear: Air suspension * Body: Timber transport / stakes * Body length: 6.20 m * Body width: 2.47 m * Unladen weight: 14,230 kg * Permissible gross weight: 26,000 kg * Technically permissible total mass: 28,000 kg * Payload: 11,695 kg * Color: Black * Emission standard: Euro VI * VIN: WDB9642241L982193 ----* Condition / Note: * ATTENTION!!! * The gearbox was removed together with the clutch. * Significant signs of wear were found on the retarder coupling and the retarder gear. Therefore, a repair of the vehicle is necessary. The worn and damaged components can be clearly seen in the photos.---- * TÜV (technical inspection) valid until 09/2026 * First registration: 09/2015

Condition: used, mileage: 50,790 km, power: 405 kW (550.65 HP), first registration: 02/2024, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2028, brakes: retarder, color: red, gearing type: automatic, Year of construction: 2024, Equipment: air conditioning, crane, Internal vehicle number: G300122 Available immediately at our location in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G300122 * Purchase price: 219,900.00 EUR * Down payment: 10% Laedpfjwr Sihex Afkjf * Term: 60 * Monthly installment: 3,400.55 EUR Residual value: 40,980.00 EUR If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 120,150 km, power: 375 kW (509.86 HP), first registration: 01/2021, fuel type: diesel, overall weight: 44,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 08/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: air conditioning, crane, Internal vehicle number: G300384 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Volvo FH 510 8x4 Timber Truck with PENZ Crane and JANZEN Trailer | Euro 6d Total price for truck and trailer: €109,900 plus VAT. For sale is a used Volvo FH 510 8x4 timber truck with a PENZ 10Z7.90 timber loading crane, manufactured in 2021. Included in the offer is a matching JANZEN SYSTEM T19 timber trailer, also manufactured in 2021. This German vehicle features a 510 hp diesel engine, automatic transmission, automatic climate control, and a liftable and steerable fourth axle. Technical data for the truck: * Manufacturer/Model: Volvo FH 510 * Vehicle Type: Timber truck with loading crane * First Registration: 01/2021 * Year of Manufacture: 2021 * Mileage: 120,150 km * Power: 375 kW (510 hp) * Engine Displacement: 12,777 cm³ * Fuel: Diesel * Transmission: Automatic * Emission Standard: Euro 6d * Environmental Badge: 4 (Green) * Number of Axles: 4 * Axle Configuration: 8x4 * Fourth Axle: Liftable and steerable * Suspension: Leaf/air * Permissible Total Weight: 44,000 kg * Unladen Weight: 15,370 kg * Payload: 28,630 kg * Automatic Climate Control * Color: White * Technical Inspection: New * Vehicle Number: G300384 * Condition: Used * German Vehicle Technical data for the crane: * Manufacturer: PENZ * Model: 10Z7.90 * Type: Timber loading crane Technical data for the trailer: * Manufacturer/Model: JANZEN SYSTEM T19 * Vehicle Type: Timber transport trailer * Year of Manufacture: 2021 * Number of Axles: 2 * Unladen Weight: 3,270 kg Lodpfx Afjxmug Nekjaf Inspection possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. Financing example: * Internal number: G300384 * Purchase price: €89,900.00 * Down payment: 10% * Term:

Condition: used, maximum load weight: 15,730 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2021, next inspection (TÜV): 08/2028, Year of construction: 2021, Internal vehicle number: G300385 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 3,270 kg Loading area: 5,500 mm Drum brakes Lodpfx Aexnuk Rjfkoaf Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window * Storage compartment outer flap, left * External sun visor, transparent * Air horn * Rotating beacon * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Hot water auxiliary heater, cab * Electric auxiliary air conditioning * Construction site filter * Storage compartment lid, driver and passenger side * Drawers, under bed & under dashboard * Stowage flaps, above windshield * Sliding roof, electric * Refrigerator, in drawer, under bed ----Electrical system and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel stowage, right * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reversing warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assistant * Active Brake Assist 4 Lasdpfx Asx Tnitofkjf * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooling system * Water pump, regulated ----Drivetrain: Twin-plate clutch * Transmission G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle steered & liftable * Rocker arm coupling with Doumatik ----Palfinger M10L80 crane mounted on 2-axle truck: * 2 hydraulic supports * 4 adjustable timber bunks (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hrs * Next inspection: * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters * AdBlue tank: 60 liters * Technically permissible total weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next technical inspection due: 05.2026 ----Vehicle number/Vehicle: 11675----Errors and prior sale reserved----Advertisements and various lettering have been digitally removed. We will be happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: ----* Trade-in of your old vehicle * TÜV/technical inspection * Complete export handling * Arranging financing * Application for export license plates * Vehicle relocation * Vehicle registration * Vehicle recovery and transportation ----YOUR VTS TEAM

Condition: used, maximum load weight: 31,820 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/1980, loading space length: 9,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 900 mm, Year of construction: 1980, Equipment: ABS, tail-lift, Müller-Mitteltal T4 Lowboy Trailer * SAF axles with drum brakes * Twin tires * Low platform with extended loading area * Hydraulic loading ramps, adjustable (2 units) * Drive-over gooseneck * Additional supports at the rear * Turntable design ----Dimensions & Loading Area: Loading area approx. 9,800 mm * Loading area width: 2,550 - 3,000 mm * Loading area height: 900 mm Ljdpfx Aoy Skl Ijfkjaf ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tires: 235/75R17.5 ----Vehicle number: 11892----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. -----We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. -----?YOUR VTS TEAM

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, next inspection (TÜV): 11/2026, total width: 2,550 mm, total height: 3,900 mm, * Tire size: 385/65 R22.5 * Technically permissible total weight: 19,000 kg * Unladen weight: 2,950 kg * Overall length: 7,650 mm * Next inspection due: Vehicle number/Vehicle: 11676. Errors and prior sale excepted. Advertisements and various lettering have been digitally removed. Ledpoydhfusfx Afksaf We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport ?YOUR VTS TEAM

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 Features and technical specifications: - Grinding unit can be swivelled using a hand crank - The machine frame, made of welded steel, guarantees high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for better sanding results - Oscillation can be switched on as required - Grinding base with graphite coating for a longer service life of the grinding belt - Height-adjustable grinding table to utilise the full width of the grinding belt - Additional table for grinding radii with integrated extraction ports Ledpfx Ajzk Nrujfkoaf - The spring-loaded belt tensioning system automatically compensates for differences in belt length - With adjustable stops, ideally suited for veneer sanding - Excess veneer can be sanded down effortlessly - With castors - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Grinding surface length: 800 mm - Grinding surface width: 150 mm - Grinding unit swivel range: 0–45° - Work table length: 950 mm - Worktable width: 450 mm - Work table height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: at short notice Location: Flörsheim

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation Laedpfxozrui Ij Afkef - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8017 TECHNICAL DATA - track width 335mm - arbor width 400mm - max. blade diameter 350mm - blade arbor diameter 80mm - max. cutting height 120mm - table width with clearance 700mm - table length 1720mm from above: - guides/pawls - roller, sliding pressure, metal - guides/pawls - roller, sliding pressure, metal - arbor with saw blades - sliding pressure arbor, metal 2 pcs from below: - pneumatic guide rail - sliding metal roller - guides/pawls - track - sliding metal roller, output - electric body lifting 0.35kW - manual arbor lifting with saw blades - central lubrication - stepless feed rate adjustment 1.5kW - main motor 30kW - laser 3 pcs - floating blade - additional sleeve for multi-blade saw - blade cleaning - diameter of dust extraction nozzle 260mm - overall dimensions L/W/H 2300x2000x2150mm - weight approx. 3000kg ADVANTAGES – German made – Floating blade – Laser 3 pcs – Blade cleaning – Additional sleeve for multi-blade saw – Pneumatically adjustable guide rail – Stepless speed adjustment – Used multi-blade saw, very good condition Net price: 136900 PLN Net price: 32595 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations) Lodpezrmqwsfx Afkoaf

Condition: used, maximum load weight: 33,780 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller timber semi-trailer with bolster and stakes Ledpfszpcp Rox Afkjaf * BPW axles with air suspension and disc brakes * 1st axle liftable * Spare wheel holder * Tyres 385/65R22.5 * Aluminium rims * Work lights * 2x storage compartments * Jost landing gear For further information, please feel free to contact us.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C91003178, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,400 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Lajdpfx Aszlhfvjfkef Spindles: 1x22T Control: TC15-2D graphics Light barrier: Lazersafe IRIS Backgauge: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: manual type WILA / Trumpf / Type B / R2 Front folding support table Light work area front and back 1x set of bending tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9S1077, functionality: fully functional, operating hours: 40 h, stroke length: 270 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Ledezlhfiepfx Afkoaf Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100376, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Laodpfxezlhdlj Afksf Front foldable support table Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9s10075, functionality: fully functional, operating hours: 40 h, power: 5 kW (6.80 HP), total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, warranty duration: 36 months, back gauge adjustment: CNC-controlled, number of axes: 3, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Ledpfxezlhc Ij Afkeaf Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9S1073, functionality: fully functional, operating hours: 40 h, stroke length: 270 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment! Laedpfx Aezlhchjfksf

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100372, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Laedszlhb Ropfx Afkof Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Front foldable support table Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!