Used Hermle Tool Cutter for sale (38,429)

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 Dcjdpfx Ahsxmagzsgji table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 6,5 x 4,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change - OPTIONALLY available without pallet changer

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,132 h, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, table width: 465 mm, table length: 800 mm, table load: 200 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HERMLE C600V was manufactured in 1999. It features a fully enclosed design with dual front sliding doors and an ergonomic tool changer system. The machine is equipped with a HEIDENHAIN control unit, ensuring precision and reliability. If you are looking to get high-quality machining capabilities, consider the HERMLE C600V vertical machining centre we have for sale. Contact us for further details. Dsdpfx Ahsy T Htkjgoci - Control On: 48,840 hours- Machine On: 48,303 hours- Program Run: 19,244 hours- Drive On: 42,175 hours- Axes in Motion: 19,519 hours- Tool Magazine 1-10: 58 hours- Tool Magazine 11-20: 622 hours- Tool Magazine 21-30: 40,269 hours- Current Axis Coordinates: X = -236.820, Y = +421.759, Z = +186.835- Enclosure Style: Fully enclosed with dual front sliding doors and red ergonomic handles- Electrical Supply Connection: Overhead industrial power sockets (METEENCE units visible: 2x blue 230V outlets, 3x red 400V CEE industrial outlets)- Tool Changer System: Chain/pocket style automatic tool changer visible via top rear access panel

Condition: excellent (used), For sale, Form thermostat - Tool Temp TT-188 Max. heating temperature - 90°C Medium - water Power: 9850 Watts The device has: - vacuum pump vaccum - vacuum tank - function of sucking the medium out of the mold - the device can be integrated with the machine, maintenance-free Dcjdpfjvzb Nqsx Ahgoi

Condition: excellent (used), Year of construction: 1998, Hermle UWF 802 M Hermle UWF 802 M with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Travel distances X: 500 mm, Y: 430 mm, Z: 400 mm Table size 800 x 390 mm Spindle connection ISO 40 Spindle speed 71 to 3550 rpm, 18 steps Feed rate X and Y 2 to 1600 mm/min, stepless Feed rate Z 2 to 1000 mm/min, stepless Rapid traverse X and Y 1.6 m/min Rapid traverse Z 1 m/min Spindle drive 3 kW Mains connection 400 volts, 50 Hz - Spindle speed via 18 gear stages - Vertical milling head, swiveling to the right and left - Hydro-mechanical tool clamping, vertical and horizontal - Automatic central lubrication - Coolant system located next to the machine - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Space requirement L x W x H 2000 x 1800 x 1950 mm Weight approx. 1750 kg Accessories and equipment: Dodozbrz Ijpfx Ahgjci Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with Heidenhain TNC 124 NC control, cycle-controlled, year of manufacture 1998, in very good condition. The machine is fully functional, of course. All slides move very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see for yourself what condition it is in.

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Dedjy Uddpspfx Ahgjci Cooling: 50,000 kcal/h Max. pump pressure: 4 bar | 100 l/min

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Dcsdpfex Emfksx Ahgoi Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Dcedpoy Uddcefx Ahgsi Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: used, Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Manufacturer: Tool-Temp Type: TT 134 Overall dimensions: 390 x 1030 x 1070 mm Year: 2012 Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indication Automatic water filling Remote and internal temperature control Automatic air vent Water and oil medium operation Max. Temperature: 140 °C | 18–24 kW Cooling: 50,000 kcal/h Dcsdpfxex Emd Te Ahgsi Max. pump pressure: 4 bar | 100 l/min

Condition: used, Year of construction: 1986, x-travel 500 mm y-travel 360 mm z-travel 400 mm Control Siemens 810 tool taper SK 40 Dcsdpfx Ahoyt R Eiegei table surface area 800x390 mm T-slot - width 14H7 mm number of T-slots 6 T-slot - distance 63 mm turning speeds 20-4000 U/min transmission ratio 4 Feed 1-2000 mm/min rapid traverse 5 m/min total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5x2,9x1,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM After capital renovation 3 months warranty for parts Dcedpfxeyn Dy Nj Ahgoi

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Dcedpfxocw Dg Dj Ahgsi Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. Dcodpeygx Hnofx Ahgei The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 1996, Technical details: Dsdpfsu Nc T Rjx Ahgoci x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm control: Heidenhain TNC 425 spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: 75 mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: 90° Vertikal-Spindel ° distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm turning speed range: 20 ... 4500 U/min tool changer with: 32 tools (Typ HTC 32) feed:: 1 ... 5000 mm/min Table dimensions: 850x440 mm table swivelabel +/-: nein = starr ° table load: 500 kg total power requirement: 15 kW weight approx.: 3500 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet LxWxH: 1,6 x 0,6 x 1,7 m Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be demonstrated under power. i.D. *

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° Dedpfxju Nc U Ie Ahgsci feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m total power requirement: 13 kW Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: IBAG SKI 25 control: Heidenhain TNC 425 Djdpfxju Nc Uhe Ahgeci quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg tool holder / places: 32 places für IBAC SKI 25 weight approx.: 3600 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre capacity Accessories: - 3-D push-button Heimer - Vertical head Hermle - Tool holders according to availability i.D. *

Condition: excellent (used), Year of construction: 1996, x-travel 800 mm y-travel 600 mm z-travel 500 mm Dsdpfxey Tyznj Ahgsci

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Djdey S Dddepfx Ahgjci

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Dedey Suavepfx Ahgjci

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Dcsdpoy St Urjfx Ahgoi

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 Dedpfx Ajcxxntohgoci turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm Dcedpfx Aezcmz Eehgei

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Hermle C 250 V, Year of manufacture: 2025, Control system: Heidenhain 7, Travel range X/Y/Z: 600/550/450 mm, Tool changer: 30-position, Tool holder: HSK 63, Spindle speed: up to 16,000 rpm, Fixed table, Table size: 800 x 616 mm, High-pressure coolant system: 40 bar, Paper band filter system, 3D measuring probe: Blum TC, Blum LG 53 WZ for measuring / breakage detection, Chip conveyor, Dcjdpey Uwhuofx Ahgji Enclosure roof: manual.

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Spindle hours approx. 14,000 (replaced 11/2017) Drive operating hours approx. 68,500 Traverse paths: 850x700x500 mm Rapid traverse: 45 m/min Speed: 18,000 rpm HSK 63 Tool changer with 38 stations Laser tool measurement/breakage monitoring Djdpoy Er Ukofx Ahgjci NC tilting rotary table D=420 mm Control: Siemens 840D Internal coolant supply 80 bar Paper band filter Chip conveyor Electronic handwheel module Oil mist extraction Chip flushing gun Thermal compensation Heidenhain probing system

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min Djdpfxjy Nnxas Ahgsci spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min Dcedpfey Nnw Nox Ahgji rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant