Used Hans Weber Maschinenfabrik Twin Screw Extruder Weber Ds-85 for sale (15,988)

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, table load: 20,000 kg, spindle speed (max.): 3,500 rpm, number of axes: 3, This 4-axis Burkhardt-Weber MC100 was manufactured in 1998. It features a working range with an X-axis travel of 3,000 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,500 mm. The machine has a maximum table load capacity of 20,000 kg and a spindle speed of 3,500 RPM. If you are looking to get high-quality milling capabilities, consider the Burkhardt-Weber MC100 horizontal machining centre we have for sale. Contact us for further details. • B-axis (NC rotary table): 360° continuous Fsdpfx Alezg Il Eofjgf • Tooling standard: High-torque configuration for large-scale milling • Additional notes: • Retrofitted in 2008 Technical Specification Taper Size BT 50

Condition: ready for operation (used), Tecalemit TX34221 YD grease pump / central lubrication system with manual lever – 2.85 liter tank capacity, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgedpjzd I E Hefx Alfef

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Iveco 180E32K Wheelbase: 4,185mm, New vehicle, not yet registered. 2-year factory warranty from initial registration. Color: White, Code 50105 IC 194. Transmission (9 gears), Euro 6. Ready for DELIVERY The following accessories are included: 00015 – Axle ratio 5.29 00131 – Differential lock 00166 – Tubular rear bumper 00541 – Battery disconnect switch 08289 – Preparation for toll system 05899 – Right-hand driver's seat armrest 00640 – Mechanical tilting roof 07747 – Dirt-resistant, easy-to-clean interior 00553 – Headlight protection grille 02085 – Trailer socket for 24-volt operation 00430 – Trailer version for towing 05210 – ZF power take-off 06319 – 360 ccm air compressor 06403 – Tipper version 00219 – Two wheel chocks 00568 – 143 Ah batteries 00590 – Seatbelts 00632 – Sun visor 00693 – Electric windows 01483 – Preparation for PTO 02096 – Heated dryer 02181 – Central engine exhaust 02211 – Warning triangle 02463 – Cruise control 02650 – Manually adjustable air conditioning 02662 – Anti-splash mudguards 02688 – Heat-reflecting glass 02714 – Electrically adjustable and heated rearview mirrors 06150 – Rear cross member, D-value 100 KN 02912 – LDWS (lane departure warning system) 02289 – Heated fuel filter 04572 – Expansion module Fsdexybrrepfx Alfogf 05456 – Rearview mirrors for body mounting, 2500 mm 05534 – First aid kit 06555 – Fog lights 06620 – Comfort driver's seat 06629 – Headrests 06617 – Passenger seat for 2 persons 06891 – Immobilizer 07440 – Weight limits 7,500-12,000 kg 75181 – Audible reversing alarm 08277 – Heated urea tank 08297 – EVSC (electronic stability control) 75056 – LED daytime running lights 01395 – Bluetooth radio 75499 – 200-liter fuel tank 05267 – 30-liter AdBlue tank 75502 – Air filter unit on the right, in the rear of the cab 77023 – EBS (electronic braking system) 06314 – 70° alternator 06318 – 225 ccm air compressor 20790 – Tires 315/80 R 22.5 07700 – Jack 02443 – Leather steering wheel with controls 00191 – Radiator protection 00160 – Front bumper, sheet metal 00744 – Window behind the cab 02210 – Spare wheel 02721 – Spare wheel carrier on the side of the chassis 08554 – Semi-elliptical leaf spring suspension with trapezoidal spring on the rear axle 08551 – Semi-elliptical leaf spring suspension with trapezoidal spring on the front axle Emails will not be answered. If interested, please call us. Sales only to businesses or for export. Subject to prior sale and errors.

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Films PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Fgedpoqa Dq Dsfx Alfjf Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.

Condition: reconditioned (used), Horizontal Press Baler DIXI 60 SLD Year of manufacture: 2014 Semi-automatic 60-ton baling system for economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard boxes Tetra packaging Foils PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Feed opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of bindings: 3, with wire with quick release eyelets Drive power: 7.5 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Fgjdponfux Ujfx Alfsf Net price plus VAT and possible transportation.

Condition: new, functionality: fully functional, power: 2.7 kW (3.67 HP), fuel type: gasoline, color: blue, operation weight: 62 kg, Year of construction: 2026, Equipment: UVV, Weber SRV 590-II Rammer – NEW | 700 blows/min | 62 kg operating weight | 280 mm shoe width | Honda GXR 120 petrol engine with 2.7 kW Item number: WEB170160 Technical Data: Manufacturer: Weber MT Model: SRV 590-II Condition: NEW Operating weight: 62 kg Blows per minute: 700 min⁻¹ Shoe width: 200 mm or 280 mm Engine: Honda GXR 120 petrol engine Engine output: max. 2.7 kW Fuel: Petrol Starting system: Recoil start Features & Equipment: - Proven rammer for professional compaction applications - Reliable Honda GXR 120 engine – powerful & durable - 200 mm or 280 mm shoe width – ideal for trenches & confined job sites - High impact rate for efficient compaction - Compact & robust design – optimal for construction site use - Quality by Weber MT – immediately available Applications: ✓ Cable & pipeline construction ✓ Landscaping & gardening ✓ Compaction in trenches & narrow areas ✓ Municipal operations & construction companies ✓ Fiber optic & network installation Location: Warehouse D 46514 Schermbeck (NRW) – Inspection & collection possible Delivery across Germany & internationally on request Fgodpezh Dy Isfx Alfof Pricing ex works Maassenstraße 91, D 46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further models available! SRV 620, SRV 660, etc. also in stock ➡️ New & used machines, accessories & spare parts Buy Weber Rammer | SRV 590-II NEW | Petrol Rammer | Honda GXR 120 | 280 mm shoe width | Weber MT Compaction Technology Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! On request, we are happy to offer you a virtual machine inspection via video call.

Condition: used, functionality: fully functional, Grinding Machine Weber MSG 460 2 2 This universal Weber knife grinder has been specifically designed for sharpening circular knives. These knives require precisely sharpened edges, optimal cutting angles, and accurate cutting edge geometry. The machine ensures this with consistent, repeatable accuracy throughout the entire service life of the cutting tools. The short setup time, combined with the non-driven grinding wheels, makes this an efficient machine for small to medium-sized meat processing companies. Specifications: Gbe Uc Ijzf Adtezu Rsp - Knife diameter working range: 420–460 mm - Grinding angle adjustment: 15°–35° - Voltage: 380 V (3 + N, 50 Hz) - Power: 0.18 kW Fgodpfx Alszf Adtofof - Weight: 91 kg - Machine dimensions (W × D × H): 570 × 670 × 1510 mm

Condition: ready for operation (used), Fanuc A20B-1000-0850 / 09B board SN:YUY666-2544, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Fgedex Erh Repfx Alfef

Condition: ready for operation (used), Indramat DDS03.2-W050-B controller, serial number 268533-08038, used, in good condition, 100% functional. Scope of delivery as shown in the photos. Fjdpfx Alsk Uzafsfsgf

Condition: ready for operation (used), Indramat DDS03.2-W030-B digital A.C. servo controller, SN: 268532-07748, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgsdpfx Ajx Etw Hjlfjf

Condition: ready for operation (used), Rexroth DDS03.2-W030-BE12-01-FW controller, MNR: R911265358 SN:268532-06490. The controller has been factory overhauled by the manufacturer, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fjdox Dw Spjpfx Alfegf

Condition: ready for operation (used), Rexroth DDS03.2-W050-BE32-01-FW Controller, MNR: R911270416, SN:268533-04059. The controller has been factory overhauled by the manufacturer, used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Fedpfxex Dw Sve Alfogf

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Fsdpfx Aox Dxq Hslfjgf

Condition: ready for operation (used), Fanuc A20B-1000-0850 / 09B board, SN:128021, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos. Fsdjx Erh Djpfx Alfogf

Condition: new, Diamant Weber WM 306791 A/R0 3 Diamond tool, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Fodpfx Alei D Upkjfsgf

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Fgedpfx Aszp Ipislfef

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Fgjdozp Ilqopfx Alfsf Engine power: 11 kW

Condition: ready for operation (used), Year of construction: 2006, A complete Weber slicing and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2006. 2) Weber SCA scanning unit, year of manufacture: 2006. 3) Weber MCS 902 slicer, year of manufacture: 2006, product cross section X/Y: 380mm/125mm, max. product length: 1600mm, slice thickness range: 0.1mm-50mm. 4) Weber inspection and reject unit. 5) Weber transfer station. 6) CFS PowerPak 620, year of manufacture: 2005, film width range: 320mm-700mm, forming depth: 150mm. 7) 2x ELS OP2-SL6215-SMSK302 cross web labeling stations. 8) Videojet Excel 273se printer station. 9) Bizerba MD-SA-F1160/500/200 tunnel metal detector. This is a complete line including an edge trim unit and rewind station. Documentation available. An on-site inspection is possible. Fsdpfx Aszli Ufjlfjgf

Condition: ready for operation (used), Year of construction: 2013, A complete Weber slicing and packaging line is available. 1) Weber Type 904 slicer, cutting system: crescent blade, speed: 2000rpm, slice thickness range: 0.5mm-100mm. 2) CFS PowerPak 560 horizontal thermoforming packaging machine, year of manufacture: 2011, retrofit: 2013, film web width: 560mm, max. feed length: 650mm, max. forming depth: 130mm. 3) 2x CFS TL 150 cross-web labeling machines, year of manufacture: 2011, max. label width: 150mm, max. labeling capacity: 200/min. 4) Loma EMC in-line metal detector, year of manufacture: 2013. This is a complete slicing and packaging line with peripheral equipment. Documentation available. An on-site inspection is possible. Fedpfozli T Iox Alfsgf

Condition: ready for operation (used), Year of construction: 2007, A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible. Fsdpfx Alozli T Uofogf

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Fgsdezli Ulspfx Alfef

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included Fgedpfxswivdkj Alfof EXCELLENT CONDITION

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Fgjdozizkyspfx Alfjf Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: good (used), We are offering for sale a used compensation plate from the manufacturer Polypal. The scope of delivery includes: 1x compensation plate, used Fsdpfxog Siiqs Alfjgf Manufacturer: Polypal Type: SKUP Material color: Sendzimir galvanized Dimensions: approx. 130 x 85 mm Thickness: approx. 1.25 mm Weight/piece: 0.119 kg

Condition: good (used), Technical specifications for the balancing plate: Manufacturer: Polypal Included in the scope of delivery: 1x balancing plate, used Overall width: approx. 130 mm Overall depth: approx. 85 mm Material thickness: approx. 1.50 mm Fgedpfx Aji Hkm Uelfsf Bore hole diameter: approx. 15 mm Number of bore holes: 2 pcs. Weight: approx. 0.12 kg | per piece