Used Hacksaw - Automatic for sale (23,398)

Condition: used, Year of construction: 2005, Giardina single-arm automatic reciprocating spray machine for the automatic application of stains, primers and lacquers to timber and flat panels. Manufactured by Giardina Officine Aeromeccaniche S.p.A. (Figino Serenza, Italy) and supplied/integrated by Mared (Sweden). Suited to a timber coating shop, joinery or panel-finishing operation. Used, ex-production machine. Sold as seen. Crodpezlzfpsfx Ac Tjg Collection: (CH62 3QD). Collection only — the buyer is responsible for disconnection, dismantling, loading, rigging and transport. Assistance with loading available on site by arrangement.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Cedpfx Aozuzw Djc Terg Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm Cedezuzbcepfx Ac Tsrg FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes Crodpjyy Nnqjfx Ac Tsg - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals Crodpszuymkofx Ac Tjg - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" Credpfx Aomu Rtuec Tsg *

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit Csdpfx Aezuygqoc Terg • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Crodpfet Evzrex Ac Tog Manufacturer - Sorma Group. Model - PK8. Serial number - 1095. Date of manufacture - 1996. Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5334 mm cutting width 340 x 340 mm dimensions of saw-band 5334 x 38 x 1,3 mm min. cut-off length 6 mm multiple feeding length 5400 mm cutting speed 20 - 130 m/min power capacity 5,5 kW voltage 380 V Crjdpfx Ajt Tqlbec Tog total power requirement 8,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,85 x 2,30 x 2,10 m Horizontal automatic band saw.

Condition: excellent (used), CNC Flexible Automatic through-feed DRILLING LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CDL B) 1° Motorized Roller table "MAHROS" with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) S - N° 6 mobile consoles (workbenches) controlled by CN on the X-axis - N° 4 upper drilling units - N° 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) Cedpjzxn N Ijfx Ac Torg E) 2° Roller conveyor "MAHROS" with 90° motorized belts (from longitudinal to transverse) F) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SDL, with "WANDRES" panel cleaner

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Credpozil S Ijfx Ac Tog Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Codozil Suspfx Ac Tsrg Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Crodpfx Acezquywe Tog Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,600 mm, total height: 1,450 mm, fuel: diesel, overall weight: 1,495 kg, continuous power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), cubic capacity: 5,320 cm³, fuel tank capacity: 240 l, battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance – everything must go! HELVETICA POWER ® 125 KVA / 100 KW emergency power generator, diesel generator, power generator ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new goods!!! ⭐️ "Diesel engine by RICARDO ("KOFO" Premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, Noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the Premium series – a top-of-the-line device with top components. Warranty · Guarantee · Service ⭐️ One-year factory warranty! ⭐️ Optional: 2-year warranty / guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge - worldwide delivery on request Other models & configurations Crsdozwfpijpfx Ac Tjg ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heating ⭐️ individual configuration is possible at any time Technical data Rated power: 100KW/125KVA 50Hz 220V / 400V - three phases water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) large tank for 8 hours of operation Size: 2600x1150x1450mm Weight: 1495kg including sockets: 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, pay attention to the relevant guidelines to be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup power supply, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small unit, industrial unit, professional generator, high-performance unit, quiet generator, silent generator, soundproof generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power generator, power device, emergency power device, diesel unit, construction site unit

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: water, total width: 1,150 mm, total length: 2,500 mm, total height: 1,300 mm, fuel: diesel, overall weight: 1,410 kg, cubic capacity: 5,320 cm³, noise level: 68 dB, power: 80 kW (108.77 HP), battery voltage: 24 V, Equipment: documentation/manual, Warehouse clearance, everything must go: HELVETICA POWER® 100 KVA / 80 KW emergency power generator, diesel generator, power generator ⭐️ CE-compliant according to applicable regulations ⭐️ with 100% "brushless" copper alternator, Stamford type: "CE"-certified high-quality synchronous alternator with 100% copper winding! ⭐️ digital control with remote control for operation as an emergency power generator – new! ⭐️ "Diesel engine from RICARDO ("KOFO" premium series) ⭐️ including ATS unit for emergency power operation ⭐️ Super-Silent type, noise (LP1m) < 68 dB ⭐️ Diesel particulate filter and air filter in stock About the engine manufacturer Ricardo ⭐️ Ricardo has been building ship diesels for almost 100 years and is a leading engine manufacturer in this field. ⭐️ This engine comes from the premium series – a top-of-the-line unit with top-quality components Warranty · Guarantee · Service ⭐️ One year manufacturer's warranty! ⭐️ Optional: 2-year warranty/guarantee, which goes far beyond the usual (can be extended if required). ⭐️ Our insurance partner: Allianz Suisse / Allianz Deutschland (for Europe) ⭐️ Switzerland-wide and Europe-wide service available. Payment · Delivery ⭐️ Payment: upon purchase 🚚 Collection: Konstanz warehouse (Germany) 🚚 Delivery: possible throughout Germany (mainland) for an extra charge – worldwide delivery on request Other models & configurations ⭐️ Are you looking for a different unit? ⭐️ More or less kW, alternative engine (e.g. Cummins, Deutz, Volvo) ⭐️ larger tank, additional tank or tank and water heater ⭐️ individual configuration is possible Technical data Rated power: 80 KW/100 KVA 50 Hz 220V / 400V - three-phase water-cooled, with 1500 revolutions with AVR (for load-dependent speed control) Csdpszwfk Tofx Ac Terg large tank for 8 hours of operation Size: 2500x1150x1300mm Weight: 1410kg including sockets: 1x 230 V / 16 A 1x CEE 400 V / 32 A 1x CEE 400 V / 32 A 2x CEE 400 V / 63 A Other When using your power generator, please pay attention to the relevant guidelines that must be followed. Keyword list: power generator, generator, emergency power unit, emergency generator, power generator, energy generator, power unit, unit, mains replacement system, NEA, emergency power, backup power, backup electricity, power supply, power source, self-sufficient power supply, island operation, construction power, construction site generator, event power, camping power, outdoor power supply, diesel generator, gasoline generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, AC generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, quiet generator, silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home emergency power, commercial power, industrial power, agricultural generator, construction site equipment, workshop power, server emergency power, PV emergency power, hybrid generator, ATS, changeover switch, power distributor, CEE

Condition: used, mileage: 391,403 km, power: 221 kW (300.48 HP), first registration: 04/2013, fuel type: diesel, tire size: 315/70, tire condition: 40 %, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2013, Tyre size: 315/70 Tyre profile: 40% Crjdpfx Aozux Itec Tsg Front axle: Steering Rear axle: Double wheels

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Cjdpfx Acey Ndyae Terg Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: used, mileage: 165,203 km, power: 213 kW (289.60 HP), first registration: 07/2015, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, = Additional options and equipment = - Air conditioning - Webasto heater = Further information = Damages: none = Company information = Crsdpfx Aezux Sxjc Tjg We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring an extensive parking area serving as our showroom. We always have a large selection of buses in stock—various brands, capacities, models, and price ranges. We can find the right touring coach, school bus, or city bus tailored to your requirements or budget. All information is provided without guarantee. Subject to errors, prior sale, and typos. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Csdpfx Aozxc Ncsc Terg Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Csdpfx Ajvc Akloc Terg Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. Csdpfx Asdzp T Nec Torg The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Codpfxozd Uqcj Ac Terg Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: used, Automatic lathe Manufacturer: STROHM Model: M125 Crsdpsyllr Iofx Ac Tog

Condition: used, Year of construction: 2004, Technical details: Basket size LxWxH: 530 x 320 x 200 mm Max. basket weight: 50 kg capacity: 4 Körbe/h; baskets/h No. of washing chambers: 1 No. Of tanks for washing: 1 No. Of tnks for conserving: 1 Cleaning medium: Tetrachlorethen Electrical heating power: 42 kW Machine size LxWxH: 4 x 3 x 2 m Credpfezu St Nox Ac Tsg

Year of construction: 1990, condition: used, Cutting angle: 90°-45°, operating hours: approx. 4420h. Equipped with automatic material feed as well as roller conveyors on the left and right with ball-bearing rollers and storage compartments beneath the roller conveyors for short material sections. Including spare saw blades. The coolant was changed approx. 5 operating hours ago. An on-site inspection is possible. Cjdpfezx Ehhsx Ac Torg