Used Grenzebach Rfs for sale (239)

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, Year of construction: 2020, We are offering this used MCF RF 1500 SS mobile concrete mixing plant, manufactured in 2020, for sale. Capacity: 1000 liters If you have any questions or require further information, please feel free to send us a message or call us. Nlsdpfx Ahjzrgxbsfof

Condition: like new (used), Year of construction: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Complete HPLC System – 2023 For sale is a high-end Shimadzu LC-2050C 3D liquid chromatograph, additionally equipped with a Shimadzu RF-20AXS fluorescence detector. Both instruments were manufactured in 2023. The set is unused and in very good cosmetic condition. System Configuration • Shimadzu LC-2050C 3D – Integrated HPLC System • Built-in PDA (Photodiode Array) detector • Shimadzu RF-20AXS – External FLD (Fluorescence Detector) • Integrated autosampler • Sample cooling • Column thermostat • Four-component low-pressure gradient • Integrated touchscreen panel • Dell computer • UPS / Emergency power supply • Accessories and cables as shown in the photos Shimadzu LC-2050C 3D – Key Parameters Pump • Flow rate setting range: 0.0001–10 mL/min • Four-component low-pressure gradient • Gradient setting range: 0–100%, step 0.1% • Maximum pressure: • 50 MPa at flow rates of 0.0001–3 mL/min • 44 MPa at flow rates of 3.0001–5 mL/min • 22 MPa at flow rates of 5.0001–10 mL/min • Integrated mobile phase degassing system Autosampler • Automatic sample injector • Sample injection volume range (standard configuration): 0.1–100 µL • Sample injection volume accuracy: ±1% at 50 µL • Sample cooling/thermostating capability • Sample cooling temperature range: 4–45°C PDA Detector The LC-2050C 3D version features an integrated PDA (Photodiode Array) detector, enabling spectral recording and analysis of multiple wavelengths. Thanks to the PDA detector, the system allows not only for standard chromatographic analysis but also for spectral evaluation of detected substances. Shimadzu RF-20AXS Fluorescence Detector The system has been additionally equipped with a high-sensitivity RF-20AXS fluorescence detector, significantly increasing the analytical capabilities of the entire set. RF-20AXS Parameters • Light source: Xenon lamp • Additional low-pressure mercury lamp for wavelength accuracy control • Wavelength range: 200–750 nm • Spectral bandwidth: 20 nm • Wavelength accuracy: ±2 nm • Wavelength repeatability: ±0.2 nm • S/N for the Raman peak of water: ≥2000 • Standard flow cell: 12 µL • Maximum cell pressure: 2 MPa • Cell thermostat • Ability to monitor two pairs of excitation/emission wavelengths simultaneously The combination of PDA + FLD (Fluorescence Detector) provides a wide range of analytical capabilities and allows for the determination of both standard UV/Vis absorbing compounds and substances requiring highly sensitive fluorescence detection. Device Data Shimadzu LC-2050C 3D • CAT. NO.: 228-65822-58 • Year of manufacture: 2023 Shimadzu RF-20AXS • CAT. NO.: 228-65305-58 • Year of manufacture: 2023 Application Njdpfozv Saljx Ahfjlf The system is intended for, among others: • Pharmaceutical laboratories • Quality control • Chemical laboratories • Food industry • Environmental research • Research and development laboratories • HPLC analyses requiring PDA detection • Trace analyses using fluorescence detection Condition Year of manufacture: 2023 Device is unused. Very good cosmetic condition – consistent with the photos. Sale of a complete set: Shimadzu LC-2050C 3D + RF-20AXS + Dell computer + UPS + accessories shown in the photos. Additional photos, serial numbers, and information about the device can be provided upon request.

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left Nsdpfxozinzrj Ahfjlf - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, workpiece length (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Unit with only 50 operating hours! The new price was €280,000! Currently, the unit is only partially operational, as it is not currently connected to the cooling system. TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min Processable screw length: 25 - 40 mm MACHINE DETAILS Automation and feeding Feeding: Hopper conveyor Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Nests per station: 2 Quenching medium: Water Quenching water tank: Present Discharge: Magnetic discharge conveyor Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper conveyor Inclined conveyor Linear sorter 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge conveyor Nsdpfx Aozmwcajhfslf Demagnetization unit Cartridge filter Temperature monitoring Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,830 h, load capacity: 1,600 kg, lifting height: 5,470 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 Nljdszf Saqopfx Ahfsf Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 48V Battery type: Lithium-ion Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: The vehicle will undergo a safety inspection according to UVV regulations. Before delivery, the machine will receive a service and be cleaned. Upon request, the machine can be painted for an additional charge. In addition to this model, we have approximately 120 other forklifts of all weight classes in stock at our warehouse in Meschede-Calle. Visit our website – rf-stapler. Lease-purchase and financing options are available at favorable terms. We are also happy to buy your used forklift, even if you do not purchase a vehicle from us. Our forklift specialist workshop specializes in the repair, service, refurbishment, and overhaul of your forklift. We can also display your vehicle for sale at our location. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin.

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Nlsdpfx Aeu Rc Anshfef Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Nsdpfx Ahju Rc Hyofjlf Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: ready for operation (used), Festo ELGA-TB-RF-70-800-0H+MF / 1371245 toothed belt axis, used, in good condition, 100% functional, delivery as per photos. Nodpfsx Ernkox Ahfjlf

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 26 kW (35.35 HP), type of input current: three-phase, type of cooling: air, overall weight: 358 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,300 mm, total height: 1,600 mm, warranty duration: 12 months, heating capacity: 30 kW (40.79 HP), Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Nodsx Ux T Sjpfx Ahfslf Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2004, Gathering machine Kolbus ZU 840 Year: 2004 Description: - Number of gathering stations: 16 - ATC thickness control Nlsdpfxewut D Eo Ahfof - Hand feeding station: 2 - Set up element - Excluding pump(s) - Excluding delivery For coupling with an existing book block production line. Compatible with: Sigloch SB, Müller Martini Collibri, Kolbus RF book block production line. Maximum size range: 420 x 320 mm Minimum size range: 105 x 105 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), functionality: fully functional, operating hours: 30,604 h, laser hours: 21,552 h, laser power: 2,000 W, sheet thickness steel (max.): 16 mm, sheet thickness aluminum (max.): 5 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 250 mm, No reserve price – guaranteed sale to the highest bidder! Regular maintenance: Fully serviced by LVD every 6–12 months TECHNICAL DETAILS Control: Fanuc 160i L Sheet size: 2,500 mm x 1,250 mm Travel paths: 2,600 x 1,300 x 250 mm Laser Laser power: 2 kW / 2000 watts Laser model: GE-Fanuc RF CO2 Laser Maximum cutting thickness (steel): 16 mm Maximum cutting thickness (stainless steel): 6 mm Maximum cutting thickness (aluminium): 5 mm Optics & focusing Nljdoxv Skwspfx Ahfsf Quick-change lenses: 5” and 7.5” Focusing head: manual MACHINE DETAILS Parts counter: 193,870 Power-on hours: 77,278 h Operating hours: 2,320 h Cutting hours: 21,552 h Laser power-on hours: 30,605 h Machine dimensions: 4,610 x 4,970 x 2,200 mm Weight: 11 t EQUIPMENT - Pneumatic ball support system - Capacitive height sensing system - Laser eye system for precision - High-pressure Clean-Cut function - Scrap/small parts compartment - Extraction system - Chiller unit - Operating manual

Year of construction: 2012, condition: excellent (used), Bystronic Xpert Press Brake 150ton Nlodpfxjip Npfs Ahfef Xpert 150 /3.1 6axis in total 4 Axis Back Gauge Hydraulic RF-A Upper tool clamping Integrated Hemming table for producing flashings and safety edges in sheet metal Year 2012 Machine will come with set of upper & lower tooling.

Condition: used, functionality: fully functional, machine/vehicle number: D435T08867W, Year of construction: 2022, load capacity: 1,600 kg, lifting height: 7,750 mm, fuel type: electric, mast type: triplex, construction height: 3,141 mm, fork length: 1,200 mm, drive type: Elektro, Reach truck Chassis number: D435T08867W Load center: 600 Fork width: 120 mm Fork thickness: 35 mm Mast type: Triplex Condition: As new Technical condition: very good Front tire size: 343x140 Rear tire size: 285x100 Battery voltage: 48V Battery capacity: 775Ah Battery manufacturer: Hyster with Aquamatik Battery year of manufacture: 2022 Nljdpfx Asyul Hqohfjf Description: 11 km/h maximum travel speed, start via key switch, battery compartment, 1223x427x784mm, battery removal from above, 700mm without load guard, hydraulic control with 4 levers, simultaneous hydraulic functions, lifting and extension, 4 hydraulic functions, standard display, driver protection roof, 2175mm, operation with rocker switch, sprung fabric seat MSG65 with headrest Side shifter 3rd valve, 4th valve, roof cover Free lift, damping via sensor with distribution box, document and beverage holder, A4 clipboard, stretch film holder, universal holder, panoramic mirror, holder with RF terminal, sprung fabric seat MSG65 with headrest, yellow rotating beacon - activation via ignition switch and switch, 1 front LED work light, 12-volt DC voltage converter, blue LED spotlight - activation when driving forward.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,186 h, load capacity: 2,000 kg, lifting height: 4,620 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, drive type: Treibgas, LPG Forklift Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Operational and fully functional Technical Condition: Normal Front Tire Type: Superelastic Front Tire Condition: 60 - 80% Nlodpfx Aszbvzfshfjf Rear Tire Type: Superelastic Rear Tire Condition: 60 - 80% Description: The vehicle will be UVV-inspected. Before delivery, the machine will receive a service and be cleaned. Painting is available upon request for an additional charge. In addition to this model, we have around 120 other forklifts of all weight classes in stock at our warehouse in Meschede-Calle. Visit our website - rf-stapler. Leasing and financing on favorable terms are always possible. We are also happy to purchase your used vehicle outright, even if you are not buying from us. Our master forklift workshop specializes in repairs, maintenance, refurbishment, and overhaul of your old forklift. We can also offer to sell your vehicle on consignment in our facility. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, windscreen, half cab, road approval (StVZO), full free lift.

Condition: used, Controller TMP process chamber Controller TMP for wafer handler/10pos. cassette front loader 5KW DC power supply (AE) 5kW RF power supply (Huettinger) Nodpfx Asuhcpyshfelf Process pump Leybold D65 + 250/500 roots blower Vacuum handler for cassette system 1x 1000ls turbopump Leybold 1x LN2 / meissner stage

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. Nsdpfx Aexykctehfelf The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: used, Type: RF 1 Machine No.: 2656 Nlsdjzl Ewpspfx Ahfef Year of manufacture: 1965 Motor power: 1.0 / 1.4 kW Spindle mount: MK 3 with drawbolt thread Table size approx.: 450 x 150 mm Estimated weight approx.: 600 kg Dimensions (W x D x H approx.): 1 x 0.6 x 1.6 m

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Nlodpsx Dng Dofx Ahfef Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Njdpeyhggrofx Ahfjlf Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/1993, loading space length: 7,010 mm, loading space width: 2,480 mm, total length: 10,610 mm, total width: 2,490 mm, wheelbase: 6,210 mm, color: other, Year of construction: 1993, Axle configuration Max. front axle load: 10000 kg Njdpfxezacfue Ahfelf Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 6.220 kg Carrying capacity: 21.780 kg GVW: 28.000 kg Functional Height of cargo floor: 92 cm Maintenance, history and condition APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good Identification Registration number: WK-10-RF = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device Nledjyy A Iqepfx Ahfef MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: reconditioned (used), Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Nsdpfx Ajxpn Tuehfelf Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, functionality: fully functional, machine/vehicle number: H2X387G04616, Year of construction: 2016, operating hours: 5,445 h, load capacity: 3,000 kg, lifting height: 3,390 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,266 mm, drive type: Elektro, Electric 4-wheel forklift truck Fahrgestellnummer: H2X387G04616 Load center: 600 Mast type: Standard Technical condition: good Front tires type: Superelastic Front tires Condition: 80 - 100% Nlodpfx Asun A Evehfjf Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Battery Volt: 80V Battery Ah: 775Ah Battery year of construction: 2016 Description: The vehicle is UVV - checked. Before delivery, the machine is serviced and cleaned. On request, the machine can be painted for an additional charge. In addition to this vehicle model, we have approx. 120 other forklift trucks of all weight classes in stock in our warehouse in Meschede-Calle. Visit our homepage - rf-stapler installment plan & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our master forklift workshop specializes in repairing, servicing and overhauling your old forklift truck. We are also happy to display your vehicle for sale. Rotator, sideshift, fork positioner, front work lights, half-cab, safety light,

Condition: used, functionality: fully functional, machine/vehicle number: H2X386J09971, Year of construction: 2018, operating hours: 6,593 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,010 mm, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: H2X386J09971 Mast type: Triplex Technical condition: good Front tires Type: Non Marking Nledpfoun A S Aex Ahfof Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery Volt: 48V Battery Ah: 625Ah Battery year of construction: 2018 Description: The vehicle is UVV - checked. Before delivery, the machine is serviced and cleaned. On request, the machine can be painted for an additional charge. In addition to this vehicle model, we have approx. 120 other forklifts of all weight classes in stock in our warehouse in Meschede-Calle. Visit our homepage - rf-stapler installment plan & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our master forklift workshop specializes in repairing, servicing and overhauling your old forklift truck. We are also happy to display your vehicle for sale. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, half-cab,

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 6,849 h, load capacity: 2,500 kg, fuel type: gas, mast type: simplex, drive type: Treibgas, LPG forklift Load centre: 500 mm Mast type: Standard Technical condition: good Front tyres type: Super elastic Front tyres condition: 20 - 40% Rear tyres type: Super elastic Rear tyres condition: 60 - 80% Nljdpsy A T Imsfx Ahfsf Description: The vehicle undergoes safety inspection (UVV certified). Prior to delivery, the machine receives a full service and cleaning. Repainting is available for an additional charge upon request. In addition to this model, we have approximately 120 other forklifts of all weight classes in stock at our warehouse in Meschede-Calle. Please visit our website - rf-stapler. Leasing and financing options are available at attractive rates. We are also happy to purchase your used vehicle outright, even if you do not buy from us. Our forklift master workshop specialises in repair, service, refurbishment, and overhauls of your forklift. We can also offer to sell your vehicle on consignment through us. Sideshift, 3rd valve, front windscreen,