Used Gema Gema Volstatic Mrs Powder Coating System Powder Coating Booth for sale (42,857)

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. Gsdpsv Da Dlefx Aivokc The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Conveyor could also be used for Ink Jet Printing of underside of packs Gedpfxjwufb Ae Aivjkc Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Ready to ship worldwide

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. Gkjdpfozyu Nqsx Aivjc The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: excellent (used), Year of construction: 2018, Soco T55 Random Carton Case / Carton Sealer / Box Taper With top and bottom tape heads With outfeed gravity roller conveyor 400 V, 3 Ph, 10 A Plastic rollers, roller width: 600 mm Height adjustable legs Dimensions: 980 mm x 800 mm Conveyor dimensions 500mm long Gsdjhlp E Hopfx Aivokc

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Gkedpfsxa H Ewsx Aivjc (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,200 mm, total height: 2,400 mm, total width: 1,700 mm, overall weight: 1,500 kg, EASY-TO-TRANSPORT ELECTRIC OVEN – NO ASSEMBLY REQUIRED!!! This system comprises an industrial electric oven with internal dimensions of 1700 × 3200 × 2100 mm, engineered to deliver consistent and reliable thermal processing for demanding applications. The key feature of this oven is that it can be transported in its assembled state, eliminating the need for on-site assembly. The oven is powered by a high-efficiency electric heating unit (2200 × 2100 × 300 mm), equipped with 3 resistance blocks (a total of 9 heating elements), providing a total installed power of 27 kW. This configuration ensures uniform heat distribution and provides sufficient energy for stable and efficient operation under continuous workloads. To optimize internal air circulation and thermal performance, the system incorporates 2 Ø350 mm impellers, driven by 2 electric motors of 1.5 kW each (2 HP). This setup guarantees enhanced airflow dynamics, contributing to homogeneous temperature distribution throughout the chamber. The oven is fully insulated using 180 mm high-density thermal panels, significantly reducing heat loss while ensuring maximum energy efficiency and complete chamber sealing. This construction supports stable operating conditions and minimizes energy consumption. Additionally, the unit is equipped with an advanced control panel featuring all essential functions and operational parameters. The interface is designed with a strong focus on user-friendliness and operational flexibility, allowing the operator to easily adjust and control the system according to specific production requirements. Gjdpfoyzw Ihox Aivokc Why this system excels: High power output (27 kW) Optimized airflow system (dual motor + impellers) Heavy-duty insulation (180 mm panels) User-friendly and fully functional control system Designed for reliability, efficiency, and industrial performance.

Year of construction: 2002, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V02SC0039, System Ceramics Spa – EASYLINE F50V60 (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: EASYLINE F50V60 Condition: Used – fully refurbished Status: In good working condition Automatic system designed for checking the dimensional quality of tiles and subsequent boxing. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Gkjdsz Df Ucjpfx Aivoc Contact us for further details, photos, videos and technical specifications.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Gjdpfsq Ngafjx Aivokc Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: Gkjdpfewzl Hxjx Aivsc The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation Gkedpfequ R Najx Aivoc This machine is connected and ready for testing in our machine hall.

Condition: new, Year of construction: 2026, functionality: fully functional, This system pertains to an industrial oven with overall dimensions of 5000 × 2500 × 3200 mm, engineered to provide high-performance thermal processing with maximum efficiency and reliability. The unit features a gas-fired boiler system integrated with three high-performance electric motors, ensuring optimal power delivery and consistent operation under demanding conditions. These are coupled with three Ø452 mm impellers, specifically selected to achieve superior airflow characteristics and maximize mechanical efficiency throughout the chamber. The oven structure is fully enclosed with 180 mm thick high-resistance insulated panels, designed to minimize thermal losses, ensure energy efficiency, and provide complete chamber sealing. This construction guarantees stable internal temperature conditions and optimal process control. Additionally, the system includes an advanced control panel interface that supplies all essential operational data and adjustment functions. The interface is developed with a focus on user accessibility and ease of operation, enabling standard personnel to efficiently manage the system without compromising precision or performance. Gkodpfx Aioyzw E Hsvec

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set Gsdpfx Aijyvv Trovokc KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: used, Year of construction: 1981, GEMA LZ 170 Lead Screw and Feed Screw Lathe Lead Screw and Feed Screw Lathe GEMA Type / Model: LZ 170 Condition: Used Year of Manufacture: 1981 Technical Data Center Height 180 mm Diameter over Slide 230 mm Distance Between Centers 1000 mm Spindle Bore 40 mm Gkedjzvfalspfx Aivsc Bed Width 240 mm Spindle Speed, 20 Steps 25 - 2000 rpm Motor Power 3.2 / 4 kW Tailstock Arbor MK 3 Quill Travel 120 mm Weight approx. 950 kg Dimensions (L x W x H) approx. 2200 mm x 800 mm x 1300 mm Equipment: - 3-jaw chuck Röhm, Ø 160 mm - Quick-change tool holder System Multifix Size B, without inserts - Chuck guard with limit switch - Machine light - Coolant system - Machine feet Inquiry item! Transportation costs will be quoted separately.

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Gkedpfx Aijy Aagisvoc Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Godozvp Uyjpfx Aivjkc

Condition: like new (used), Soco Case / Carton Sealer & Packing Station (Like New) Model T10 With infeed and outfeed gravity conveyors Top and bottom tape heads Gkjdpforza Ncox Aivsc Top box flap closer facility Adjustable box side guides Box holder on infeed conveyor for packing station use All mobile on castors In excellent working condition, Like new

Year of construction: 2002, condition: good (used), functionality: fully functional, Hydraulic Lifting table with 4000 Kg lifting capacity. Driven rollers on top. Length 5.4m width 1.3m Gsdpfx Aisz I I I Tjvjkc Extra roller conveyor length 3.1m Width 1.3m with Sew motor 1.1 Kw

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Gksdpfxjzzz Euj Aivoc Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 9.424 kg Functional Generator capacity: 300 kVA Dimensions of cargo space: 465 x 230 x 250 cm CE mark: yes Gjdpew A Havofx Aivokc Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2026, power: 500 kW (679.81 HP), motor manufacturer: Battery System: LIFePO4, Field of application: Construction Empty weight: 14.240 kg Generator capacity: 500 kVA Dimensions of cargo space: 465 x 230 x 250 cm CE mark: yes Frequency: 50 Gkjdpfxsw A Hbgo Aivec Voltage: 400 Drill equipment: Tank, Control Panel Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), motor manufacturer: Cummins, General information Field of application: Construction Weights Empty weight: 7.500 kg Functional Generator capacity: 375 kVA Dimensions of cargo space: 395 x 210 x 245 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 650 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Gksdew Dx Uhopfx Aivoc

Condition: new, 0 20000 kg height of stroke 130 mm Total height 327 mm weight 33 kg dimensions 250 x 280 x 330 mm Hydraulic machine jack Foot height 26mm Gksdpfxjvu E T Tj Aivsc

Condition: new, 0 2 x 6000 kg gear diameter 75 mm Total height 105 mm weight 26 kg dimensions 300 x 200 x 250 m Heavy-duty castors, 2-part Total load capacity 12t. Gjdpfsvu E Uqex Aivjkc with turntable

Condition: used, Year of construction: 2009, working width 1150 mm working area: 5700 m²/Std. total power requirement 3,0 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,6 x 1,2 x 1,6 m Gksdpfoxpxrnex Aivec Sweeper with charger

Condition: used, This listing is for the BioBase BNP32/BNP48 Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use The BNP32/BNP48 system is a fully automated clinical nucleic acid extraction platform that delivers walk-away automation, designed to minimize user intervention and reduce extraction-to-extraction variability. Ideal for both clinical and research settings, it ensures consistent performance and high-quality purified eluates. In addition to efficient nucleic acid extraction, the system offers: Gjdoxv Dl Hopfx Aivokc Onboard primary-sample handling Mixed-batch sampling Support for up to 32 or 48 samples per run, depending on the model Key Features Sample Capacity: Up to 32 (BNP32) or 48 (BNP48) samples per run Sample Volume: 20–500 µL per sample Processing Volume: 60–1000 µL Extraction Time: 8–60 minutes per round, depending on reagents Magnetic Bead Recovery: Greater than 98% Reagent Compatibility: Open system compatible with magnetic bead-based reagents Temperature Control: 8 independent heating modules with customizable lysis/elution temperatures Mixing Modes: Oscillating mixing (low/medium/high speeds) Program Storage: Stores up to 50,000 programs; USB import/export supported Touch Screen: 7-inch user-friendly interface Safety Features: Auto-pause on door opening, resumes upon closure