Used Gefran Power Controller for sale (61,956)

Condition: used, Year of construction: 2015, bed width 350 mm turning length 1.000 mm control Manual plus 620 Heidenhain greates pass round over bed 430 mm Swing dia. over traverse guideway 220 mm turning speed range - main spindle 1 - 3.600 min/-1 power capacity - main spindel 9 / 11 kW max. Torque ca. 200 Nm spindle head DIN 55027 / 6 spindle diameter in front bearing 110 mm spindle bore 80 mm usable bar diameter max. 80 mm System MultiFix Shank diameter 20 x 20 mm x-axis 230 mm z-axis ca. 1.000 mm diameter of quill 70 mm quill stroke 150 mm taper of center MK 5 hollow fix: 12 -150 mm hollow var: 12 -125 mm rapid traverse X: 10 / Z: 7 m/min feed power X: 4 / Z: 5 kN weight of the machine ca. 3,2 t dimensions of the machine ca. 2,8 x 2,1 x 1,9 m Lathe cycle controled SEIGER - SLZ 420 E / 1000 - WITHOUT three-jaw chuck - Impulse lubrication Flow rate: 0.1 l/min, Pump pressure: 30 bar, Tank capacity: 2 dm³ Ksdpfx Absyvkr Ajlslt

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Max. rpm A: 60 min/-1 centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production Kjdpfx Abow E Npxolelt - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: like new (used), Year of construction: 2011, operating hours: 370 h, functionality: fully functional, continuous power (apparent): 500 kVA, rotational speed (max.): 1,500 rpm, Tecno-Gen diesel generator powered by an FTP IVECO CUSOR 13 diesel engine. Coupled to a Brushless MeccAlte alternator. Power: 417/500 kVA, 400 volts, 50 Hz, 1500 rpm. Equipped with a tropicalized, water-cooled radiator mounted on the engine. All components are housed in a soundproof and waterproof enclosure. Klsdsy Tqblepfx Ablst Control panel and day tank are integrated. Built in 2011, with only 370 operating hours. This emergency backup generator set, which has been very well maintained and is in excellent condition, is now available.

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: SMC, Maintenance unit filter control valve -Soft start valve: AV4000-F04-5Y0-X260-Q Kedpfx Aox Ryhcsblolt -Pressure switch: I SE30A-01-P -Filter control: AW40-F04H-A -Switching valve: VHS40-F04A -Individual components: see photos -Price/Fee: complete -Dimensions: 340/120/H250 mm -Weight: 2.3 kg

Condition: used, Colour: Grey Kedpfx Aowh Nuyoblolt - Documentation available: No - CE certificate present: No - Serial number: 50172 - Power [kW]: 5.0 - Number of outputs [pcs]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Klsdpfxjy Nz Dij Ablot Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Kedpfxey R Npie Ablelt Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, OKUMA POWER SUPPLY 5000T Klodpfxey Suyvo Ablst E0451-521-038 . 03487

Condition: ready for operation (used), Siemens 1FT6084-8AH71-3EG1 synchronous servomotor, serial number: YFM712281102003, used, good condition, 100% fully functional, scope of delivery as per photos. Kjdpjy Srkrefx Ablelt

Condition: ready for operation (used), Siemens rotor for 1HU3076-0AC01 motor, used, in good condition, 100% functional, scope of delivery as per photos. Kjdpsy Srliofx Abljlt

Condition: ready for operation (used), Siemens 1FT6082-1AF71-2AH1 servo motor SN: YFUNO3733201001 with encoder I-2048 and 24VDC - 20.6W - 3039401, used, in good condition, 100% functional, delivery scope as per photos. Kljdpfxey Srklo Abljt

Condition: ready for operation (used), Siemens stator for 1FT6086-8AC71-3AA1 motor, serial number: YFNN14040903, used, in good condition, 100% functional, scope of delivery as per photos. Ksdpfx Asy Srl Aobljlt

Condition: ready for operation (used), Siemens stator for 1HU3076-0AC01 – Z motor, serial no.: 8C87787702001H, used, in good condition, 100% functional, scope of delivery as per photos. Kedpfjy Srl Njx Ablolt

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Kedpfxeyl Avws Ablelt

Condition: ready for operation (used), ABM Greiffenberger ZBF12NHR-S0 / G80F / 4D808-4 geared motor, serial number: 191378798 / brake TS 10.00 Nm 230V~ 0.26A, used, good condition, fully functional, delivery as per photos. Kledpfx Absy Sdrheljt

Condition: new, Siemens 1FT5074-0AF01-0 - Z servo motor SN:YFU4311120601001 with 1FU1050-6MF 13.3 mVmin - Z = K18 (radial shaft seal, oil-tight, IP65 / K42 (smooth shaft) / K31 (second nameplate) K83 (terminal box rotated by +90 degrees), unused with storage marks, 100% fully functional, delivery as per photos. Kjdsy Sdr Iopfx Abljlt

Condition: ready for operation (used), Siemens 1FT5102-0AC71-2 - Z motor SN: E1W68186402001 with 1FU1050-6GC, 20.0 m/min, used, in good condition, 100% functional, scope of delivery as per photos. Ksdpfx Ajy Sdtleblolt

Condition: ready for operation (used), Siemens 1FT5074-0AF01-2 AC VSA motor SN:EC510205346009 with 1FU1050-6GC, 20.0 m/min, used, in good condition, 100% operational, scope of delivery as shown in photos. Klodpfsy Sdr Uex Abljt

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2 - Z Motor SN: E0Z10008531005 without encoder - with 1FU1050-6HC 20.0 mV/min and EBD 0.8M 24V - 18W holding brake - Z = G45, used, in good condition, 100% functional, delivery as per photos. Klsdpfx Abey Sdrzelet

Condition: ready for operation (used), Siemens 1HU3058-0AC01 - Z Permanent Magnet Motor SN: 8C87787701001 without encoder, used, in good condition, fully functional, scope of delivery as per photos. Klodpjy Sduijfx Ablet

Condition: ready for operation (used), Siemens D - Motor 22kW / 2800rpm - 400V / 690V B5, used, in good condition, 100% functional, scope of delivery as per photos NOTE: Please enquire separately for packaging and shipping costs! Kljdpfx Absy Sduvsljt

Condition: ready for operation (used), Siemens 1FT5074-0AF71-2 - Z servomotor SN: E9L82106001004 with 1FU1050-6GF 13.3 mVmin and EBD 2 M 24V - 23W holding brake - Z = G45 (holding brake integrated), used, in good condition, 100% fully functional, delivery as shown in the photos. Klodey Sdtfspfx Ablst

Condition: ready for operation (used), Siemens 1FT6082-1AF71-2AG1 motor SN: EJ960113803001 with optical encoder 2048 PPR, used, in good condition, fully functional, scope of delivery as per photos. Klsdpoy Sdtxsfx Ablst

Condition: used, Year of construction: 2003, Technical details: Kedpfoy Tnaxsx Abljlt turning diameter: 720 mm turning length: 2000 mm control: 4110 total power requirement: 40 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4,5 x 2,3 x 1,9 m turning length: 2000 mm centre height: 345 mm internal taper -metric: 100 mm spindle bore: 92 mm tailstock-quill taper dia.: 100 mm turning diameter over bed: 720 mm

Condition: used, power: 215 kW (292.32 HP), fuel type: diesel, first registration: 05/2018, Year of construction: 2017, operating hours: 12,770 h, Used Liebherr L576 X Power wheel loader – Total weight 29,000 kg – Operating hours 12,776 – Engine 215 kW – Speed 40 km/h – Axle load distribution 15,500 kg – = Further Information = Engine displacement: 10,520 cc Unladen weight: 29,000 kg Kjdpjy Sv Hwsfx Ablolt Gross weight: 29,000 kg CE marking: yes Reference number: 93 Serial number: VATZ1333LZB046212 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.