Used Fuji Tekko Slitter Rewinder for sale (397)

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Ndodpfxsvakdzj Almea Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: used, Year of construction: 1996, Year: 1996 / overhauled in 2008 Technical specifications and equipment: • 8 printing units Material width: 620 mm Printing width: 600 mm Print repeat lengths: 250 – 520 mm Materials processed: • PA: 20 – 60 µm Nsdpfxexfvrwo Almjda • LDPE: 20 – 150 µm • HDPE, OPP and similar films: 12 – 80 µm, max. 120 µm • Laminated films • Paper: 25 – 120 g/m² Mechanical machine speed: up to 200 m/min (depending on substrate) Main equipment: • Impression cylinder with new nickel-plasma coating • Impression cylinder temperature control unit • Non-stop unwinder with web tension measurement and control, including splice table, roll diameter 600 mm, core ID 76 mm • Nip roller before 1st printing unit • 8 doctor-blade printing stations • Speed assist system • Drive elements from the printing unit to the bridge • Intercolor dryers • Web guiding before printing • Bridge with bridge dryer • Web video inspection system • Edge guiding before rewinding with 3 slitting discs and suction • Non-stop rewinder with pneumatic slitting and web tension measurement and control, roll diameter 600 mm, core ID 76 mm • 8 chamber doctor blades plus 8 additional coated doctor blades • 8 electric pumps, new • 8 ink vessels (10 L each) with hose connections, new • 8 ink catch trays plus 4 extra trays • 1 service trolley for anilox roll and sleeve handling • 1 service trolley for chamber doctor blade and ink tray handling • 8 printing sleeves, new, print length 320 mm, make: Rotec Conductive Blue Light • 8 format gears, new, print length 280 mm • 8 ceramic anilox sleeves, new. Base bodies ordered from Apex. Company Wareg will obtain required sleeve type directly from Apex; only for UniFlex sleeves will Wareg incur the additional costs. • ATEX-compliant • New Siemens S7 control system

Condition: used, Year of construction: 2008, Technical data: Printing Section - 5 × UV Flexo Printing Units - 5 × UV Dryers - Web Inspection: BST PowerScope 300 – Web Inspection System Unwinder - Max roll diameter: 1250 mm - Heavy-duty construction with pneumatic shaft and web tension control - Integrated splice table and web guiding system Rewinder - Max roll diameter: 1250 mm (≈ 40 inch) Nodpfx Alsxlrd Nomeda Cold Foil / Lamination Module - Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turnbar (Web Inversion Unit) - Allows reverse-side printing or lamination — flexible for multi-layer label applications Remailing Section - 24” - Supports reprocessing or secondary processing of pre-printed materials Additional Modules - Ben Bunch 500 - Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) - Cross Cutting Cylinder (inline sheeting or perforation — precise longitudinal or transverse cutting) - Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: used, Year of construction: 2007, The machine has undergone extensive modernization, including: • Regi-Star 20 register control upgrade • IPQ Check Pro 100% print inspection system HELIOSTAR S DRIVE RETROFIT The original gravure cylinder drive system has been upgraded to the latest Heliostar S configuration, including: • New gravure cylinder drive motors • Upgraded inking roller drive system • New cylinder chucks with adapters • Chuck drive supports • Chuck sensor system • New gravure cylinder bearings • Upgraded sidelay register components Ndjdpfx Aszrugtelmja • New sidelay register drive units • New sidelay register safety guards • Mechanical retrofit and mounting components • Electrical accessories and complete technical documentation FEATURES • Excellent mechanical condition • Outstanding cosmetic condition • Fully operational and production ready • Extensive modernization program • High-performance automatic turret unwind and rewind • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • BST 100% web inspection • Suitable for high-quality flexible packaging production TECHNICAL SPECIFICATIONS Specification Details Printing Process Rotogravure Number of Colours 8 Web Width 1,020 mm Maximum Print Width 1,000 mm Print Repeat Range 450 – 1,050 mm Unwind Diameter 1,000 mm Unwind System Turret flying splice with reel lift Drying System Gas heated Corona Treater Yes Ink Viscosity Control Yes Edge Guide System Yes Inspection System BST Rewind Diameter 1,000 mm Rewind System Turret flying splice with reel lift (76 mm & 152 mm cores) Machine Features • 8-colour high-performance rotogravure printing press • Automatic turret unwind and rewind with flying splice • Gas-heated drying system • Integrated corona treatment • Automatic ink viscosity control • Web edge guiding system • BST web inspection system • Suitable for high-quality flexible packaging and converting applications • Robust W&H engineering for reliable, high-speed production Applications Ideal for printing: • Flexible packaging • Food packaging • Industrial packaging • Laminating films • Printed plastic films • High-quality packaging materials

Condition: used, Year of construction: 2019, Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Ndjdpfoyiu I Tsx Almea Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Primary Unwinder Max roll Ø: 1000 mm | Core: 76 / 152 mm | Max weight: 1000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Secondary Unwinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Web width: 1330 mm | Max lamination width: 1315 mm | Min web width: 500 mm Hydraulic loading, BST OPG web guide, photocell edge detection Rewinder Max roll Ø: 1500 mm | Core: 76 / 152 mm | Max weight: 2000 kg Web width: 1330 mm | Max lamination width: 1315 mm Working Width: 1315 mm Materials: ALU, LDPE, LLDPE, OPA, PET, PAPER, BOPP Unwinder Diameter: 1000 mm Rewinder Diameter: 1500 mm Mechanical Speed: 500 m/min Adhesive Systems Single-component Monodispenser (VEA) for paper laminations Two-component solventless PU dispenser Heating belts for 200 kg adhesive drums Materials: ALU 6.35–50 μm | LDPE/LLDPE 30–200 μm | OPA 12–50 μm | PET 10–30 μm | Paper 40–200 gsm | BOPP 12–80 μm Controls & Accessories PLC Siemens Simatic DP IM 151-8F PN/DP CPU ET200S Semi-automatic roll trolley 1000 kg

Condition: ready for operation (used), Year of construction: 1999, A Weier generator is available. Power: 1650kW, Voltage: 690V, Speed: 1575rpm, Design: B3, Current: 1517A, Power factor: 0.91, Insulation class: H, Lubricant quantity: 88cm³, Lubrication interval: 3600h, Weight: approx. 5900kg. The generator originates from an RCC plant, however without control or regulation electronics. The generator was completely overhauled, including rewinding and ceramic bearings. An on-site inspection is possible. Nedpfxszd Eiie Almeda

Condition: ready for operation (used), Year of construction: 2006, A complete Weber slicing and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2006. 2) Weber SCA scanning unit, year of manufacture: 2006. 3) Weber MCS 902 slicer, year of manufacture: 2006, product cross section X/Y: 380mm/125mm, max. product length: 1600mm, slice thickness range: 0.1mm-50mm. 4) Weber inspection and reject unit. 5) Weber transfer station. 6) CFS PowerPak 620, year of manufacture: 2005, film width range: 320mm-700mm, forming depth: 150mm. 7) 2x ELS OP2-SL6215-SMSK302 cross web labeling stations. 8) Videojet Excel 273se printer station. 9) Bizerba MD-SA-F1160/500/200 tunnel metal detector. This is a complete line including an edge trim unit and rewind station. Documentation available. An on-site inspection is possible. Njdpfjzli Ufsx Almeda

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Ndjdjy Uydfspfx Almsa

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Nedjxz Ewnspfx Almeda

Year of construction: 1970, condition: ready for operation (used), A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible. Nsdpfxew R Dhre Almeda

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic Italian Pack traysealer machine is available. Packaging output with VAC/GAS: 4-5 cycles/min, packaging output with SKIN: 3 cycles/min, vacuum pump output: 63m³/h, max. packaging depth: 120mm, film diameter range: 250mm-340mm, max. film width: 370mm, machine dimensions X/Y/Z: approx. 1100mm/1100mm/1400mm. Including automatic film rewinder. Documentation available. On-site inspection is possible. Nsdpfswt Dabjx Almjda

Condition: ready for operation (used), Year of construction: 2005, A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible. Nsdpfx Alevva E Hjmoda

Condition: ready for operation (used), Year of construction: 2018, A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible. Ndjdewufzcepfx Almsa

Condition: ready for operation (used), Year of construction: 1996, A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible. Ndjdsx I Rprepfx Almea

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Nedjyt N Dqspfx Almeda

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Ndodpfoxmkctox Almea

Condition: used, Year of construction: 2014, Folding machine MBO Navigator K8 S-KTL/6 Year: 2014 Description: Njdpfx Aoy Rlv Solmeda - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Pump Folding unit MBO K8 S-KTL/6 - Parallel fold unit with 6 buckle plates: 78 cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Alpha 500 Plus

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. The machine is equipped with: • Unwinding unit • BST web guide • UV LED drying (5) • Turning bar • Offset units: 5 • Flexographic unit • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains Nedpfxozrxdps Almsda • CCD plate punching table • Automatic registration

Condition: good (used), Year of construction: 2008, Format: max 820 x 1,750 mm Format (pallet feeder): max 820 x 1,200 mm; min 150 x 270 mm Format (round pile feeder): max 820 x 1,750 mm; min 150 x 150 mm Folding capacity: max 205 m/min Length with pallet feeder: 5,180 mm Length with round pile feeder: 7,680 mm Width: 3,210 mm Cross-fold: max 16 pages Nodpfx Aorbzv Ielmoda Features Feeder: Control: - Vacutable - Vacubelt - Counting device 1st folding unit: - Upstream slitter shaft - 4 buckle plates - Motorized buckle plate adjustment - Spiral rollers - Slitter shaft cassette MWK - Noise protection device 1st cross fold: - Cross fold folding knife - Pocket after the cross break on the right - Slitter shaft after the cross break - Spiral rollers 2nd cross break: - Cross break Folding knife left - Spiral rollers

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates Ndjdodyk Rlspfx Almea • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention Ndedpec Idn Ujfx Almea 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts Nsdpfxodymm Ho Almeda • noise prevention delivery • belt delivery

Condition: ready for operation (used), Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately Nsdsd N D Niepfx Almeda

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: Njdpfxjfbff Uj Almoda 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Nsdpsddh Evefx Almsda Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery