Used Forte Saw for sale (5,594)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Ledpfxexnlgce Al Ishh Storage location: Garbsen

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Depth of Cut: 60mm Lhodeyzf E Ujpfx Al Ijh Motor Power: 5.3HP Saw Blade Dia: 250mm Saw Blade Bore: 30mm 400V 50Hz

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Lhodpfx Alswx I Hve Ijh Push length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

Condition: used, cutting height (max.): 1,200 mm, cutting width (max.): 1,200 mm, cutting length (max.): 6,000 mm, spindle motor power: 5,000 W, fixed bench, pivoting head Lhsdpfx Aljyzrcms Ioh chain with diagonal vertical movement automatic cutting waste collection mat

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. Ljdpfezbytlex Al Ishh When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. The saw angle is read on the scale disc.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well-maintained Ledoycm Avspfx Al Iehh Features and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring unit with automatic shifting grid with complete length stop with strip stop Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2025, Used machine Year of manufacture: 2025 Condition: as new, delivered in 12/2025 Equipment and technical specifications: - Heavy-duty worktable made from strongly ribbed cast iron for maximum stability and durability - Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation - Precision sliding table made from anodized aluminum – smooth-running guided via high-quality ball contact system - Carbide guideways – for lasting precision and minimal maintenance - Tilting cast iron saw assembly with double segment guidance – exact zero-point tilt for highest cutting accuracy - Heavy-duty parallel fence with round bar guide - Equipped with movable eccentric clamp - Integrated miter cutting device on the sliding table – for fast and precise miter cuts Lhsdpfxjy Sva Ds Al Ish - Scoring unit with belt drive - Sliding table length: 2600 mm - Cutting length: 2600 mm - Sliding table width: 360 mm - Table length: 940 mm - Table width: 560 mm - Cutting width with parallel fence: 900 mm - Max. crosscut width to the left of saw blade: 3200 mm - Saw blade tilt: 90 – 46° - Max. cutting height at 90°: 100 mm - Max. cutting height at 45°: 71 mm - Saw blade diameter: 315 mm - Saw blade speed: 4000 rpm - Scoring saw blade diameter: 120 mm - Scoring saw blade speed: 9000 rpm - Motor: 6 kW - Weight: approx. 560 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: High-performance multi-blade saw Heavy-duty cast iron construction Robust transport chain consisting of directly interconnected precision links Wear-resistant guide surfaces of the transport chain with an extremely low coefficient of friction Automatic chain lubrication Four-point saw arbor bearing for maximum stability Saw bushing with conical seat and self-centering function Four pressure rollers for precise cuts, even with thin workpieces Four slitting and anti-kickback finger rows Cutting height up to 110 mm with a 350 mm saw blade diameter Minimum cutting length 250 mm Clamping width of the saw bushing 300 mm Minimum and maximum saw blade diameter 200/350 mm Saw arbor speed 4200 rpm Feed rate 4-48 m/min Transport chain width 300 mm Saw bushing diameter (with 2 wedges 20 x 5 mm) 70 mm Work table height 750 mm Dust extraction port diameter 200 mm Air volume at 25 m/s 3500 m³/h Motor 25 kW Feed motor 1.1 kW With laser guide 1800 kg Sound emission 98.3 dB W (A) at idle without dust extraction In operation: 107.1 dB W (A) Workplace-related emission level 81.8 dB W (A) at idle without dust extraction In operation: 91.2 dB W (A) Availability: short-term Ljdpfx Alezbv Hzs Ijhh Storage location: 63934 Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm Lhedpfx Aeykvw Sjl Ieh - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Saw blade diameter: 300 mm - Saw blade speed: 4750 rpm Lhodpfxey Dkg Nj Al Ioh - Motor power: 4.5 kW - Motor speed: 2880 rpm - Max. cutting width: 5300 mm - Max. cutting height: 2100 mm - Max. panel height: 2200 mm - Max. processing thickness: 80 mm - With small parts support - Dimensions: approx. 6500 x 1300 x 2880 mm - Weight: approx. 900 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 with electric motor-driven height and tilt adjustment for the main saw blade, dimension entry via keypad digital display of tilt angle and cutting height CE version Lsdpfoy Ih R Tox Al Iohh Cutting length 3000 mm with central and end position locking Cutting width 1000 mm with digital display and fine adjustment Cutting height up to 175 mm with a saw blade diameter of 500 mm (the scorer must be removed for this) Motor 5.5 kW with 4 speeds 3/45/6000 rpm manually adjustable with automatic brake and digital speed display 2-axis scorer with electric motor-driven height and lateral adjustment Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2001, Used machine Lhjdpfoxvnpcex Al Ijh Year of manufacture: 2001 Features and technical data: - Cutting length: 4300 mm - Vertical cutting height: 2150 mm, horizontal cutting height: 2100 mm - Maximum cutting depth: 60 mm - Saw blade diameter: 250 mm; bore: 30 mm - Motor: 4 kW - Speed: 5100 rpm - Material support with rollers - Fixed support elements for secure positioning of workpieces - Middle support: stable support elements at working height, individually manually foldable - Measurement reading for: - horizontal saw cuts via scale - horizontal saw cuts via strip stop from 50–500 mm - vertical saw cuts via stop from 0–1300 mm - Air connection for pneumatically retractable slatted frame (required air pressure: 6 bar) - Scoring system: by double cut of the main saw blade; the plunge depth of the saw blade is limited simply by adjusting a stop, so the saw blade scores the workpiece in the direction of feed Availability: short term Location: Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Special SCM guide system for the saw carriage. The curved design between the ball bearings and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scoring unit can be easily swung in and out from the outside; a special plate enables precise positioning. The rip fence is extremely robust and can be used for both longitudinal and mitre cuts; quick reset to the starting position. The precise flip stops allow for direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilting: 45° Max. main saw blade diameter: 300 mm Max. scoring saw blade diameter: 100 mm Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4,000 rpm Scoring saw speed: 8,000 rpm Cutting width with parallel fence: 1,000 mm Extraction port diameter: 100 mm Motor: 4 kW Weight: 425 kg Availability: short notice Lhsdpfx Aljy Nugde Ijh Location: Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Features and technical data: - Equipped with electric height and tilt adjustment for the main saw blade, dimension input via keypad - Digital display for tilt angle and cutting height - CE version Lhsdpfx Asy Siz Iel Ieh - Cutting length: 3000 mm - With center and end position locking - Cutting width: 1300 mm - Fine adjustment on parallel fence - Saw blade diameter max. 450 mm - Motor: 5.5 kW with 4 speeds (3000/4000/5000/6000 rpm), manually adjustable - With automatic brake and digital speed display - 2-axis scorer with electric height and lateral adjustment - RAPIDO scoring system - DUPLEX double-sided mitre fence Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 The machine will be completely overhauled Equipment and technical data: Cutting range: Cutting length: 4300 mm Cutting height: 2100 mm Cutting depth: max. 60 mm Extraction: Saw unit: 120 mm Frame end: 100 mm Workpiece support: Stable plastic support ensures optimal positioning even for narrow workpieces Chips are conveyed away through slanted slots Lifting roller transport system: Manual operation for smooth and material-friendly transport Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Ljdpfx Ajyxx U Del Ijhh Circular saw blade: Carbide-tipped, 250 mm, alternate top bevel, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: Including workpiece support for narrow sections (4 fields) With strip stop Extraction system according to BG guidelines TRK (below 2 mg fine dust per m³ air) Dimensions: approx. 5,100 x 1,100 x 2,600 mm Weight: approx. 1,100 kg Availability: by arrangement Location: 63934 Röllbach

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data Cutting length: 5300 mm Cutting height: 2200 mm (edging height 2110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit: 120 mm - Frame end: 100 mm Workpiece support: - Stable plastic support for optimal stability, also suitable for narrow workpieces. - Chips are removed via diagonal slots. Roller transport system: Manual for easy and gentle material handling Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Saw blade: Carbide (HM), 250 mm, hollow ground, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: incl. workpiece support for narrow parts (5 positions) with strip stop Ljdsy Scl Tspfx Al Iohh with Supercut scoring unit Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Lodpfjx Hbruox Al Iehh Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: Cutting length: 3600 mm Cutting height: 1644 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Motor: 3 kW Incl. intermediate workpiece support on all sections Incl. narrow part device Incl. manual length stop Dimensions approx.: 4620 x 1500 x 2460 mm Location: Röllbach Lhedpfx Aeyxyabjl Ieh Availability: short notice

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fully automatic vertical machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control for vertical and horizontal cuts, with ALU folding stops and ALU center support, with SUPER-CUT scoring unit Motor 3 kW - 400 V Lsdsx Rr D Aopfx Al Iehh Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: very well maintained Equipment and technical data: Saw unit can be tilted up to 45° 3 speeds: 3500/4500/5500 rpm Motor: 7.3 kW S6 Cutting length: 3200 mm Cutting width: 1250 mm Cutting height max.: 133 mm Electric height adjustment X-Motion screen control with 5.7" monitor Controlled parallel fence Parallelogram guard, height-adjustable, can be swiveled out of the working area, saw blade diameter max. 400 mm Dust extraction connection 80 mm Scoring unit 1.1 kW, 8500 rpm with 2 axes Crosscut fence with 2 digital jaws Tool compartment for 5 saw blades Graduated scale index with length compensation for extension table Parallel fence with digital display and automatic length compensation when the saw blade is tilted, fence ruler length 1200 mm, can be swiveled out Availability: short notice Lhodezbv Hhopfx Al Ish Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Sliding carriage: 5000 mm Motor: 11 kW / 15 hp Cutting width: 1050 mm, without scoring blade, prepared for scoring blade Ledpfey Tl Exex Al Iohh Tip Servo Drive Laser-cut seam indicator Electromotive height and swivel adjustment Dimensions: 5000 x 1400 x 1900 mm Weight: approx. 1100 kg Location: Nattheim

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Cutting capacity up to approx. Ø 260 mm Robust cast construction Manual feed and hydraulic cutting cycle Swivel head for angular cuts Lsdpfxowbfhce Al Iehh Integrated coolant system Ideal for workshops and industrial use

Condition: good (used), Year of construction: 2021, machine/vehicle number: 161000228, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 280 mm, rotational speed (max.): 4,100 rpm, total length: 10,000 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 700 kg, saw blade speed: 3,200 rpm, ELUMATEC TS 161/21 Undercarriage Circular Saw Lhjdpfx Aljzdyrre Ieh - Power: 1100 W - Swivel range: 90° to 45° to the left and 90° to 0° to the right - Includes digital length stop with HECHT manufacturer's control system, as well as a bilateral roller guide, width: 90 mm Attention: the item must be picked up on a fixed date of July 2, 2026, at a time to be agreed upon. FCA D-72770 Reutlingen – loaded onto a truck.

Condition: good (used), Year of construction: 2022, machine/vehicle number: 6947, functionality: fully functional, power: 1.3 kW (1.77 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 1,700 mm, total length: 4,500 mm, total width: 900 mm, total height: 2,200 mm, overall weight: 1,000 kg, cutting length (max.): 3,600 mm, WINTER EASYCUT 3216 panel saw Ledpjzdypqjfx Al Ishh Attention: The item must be collected on July 2, 2026, at a date to be confirmed. FCA D-72770 Reutlingen - loaded onto a truck.

Year of construction: 2013, condition: good (used), SICA-TRS-SY 25-160 R, PLANETARY TUBE SAW Application: Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 25mm Max diameter 160mm Year of construction 2005 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Ljdpfx Asvn A R Njl Iehh The machine is my property.