Used Flott Sb 30 Mv Plus R3 for sale (30,985)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Lsdewc Nvgepfx Ad Ashf Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Ledpfx Ajrivfced Aohf Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2021, Multi-pallet fork Lsdpfx Adjymtxrj Aohf

Condition: refurbished (used), Year of construction: 2007, functionality: not functional, UNTHA RS30 SB-460 Year of manufacture: 2007 Used - Damaged Number of rotors: 4 Grinding chamber: 460 x 500 mm Lhsdsxn Iwkspfx Ad Ajf New blades: 1Z-66, 8Z-66 Motor power: 2 x 11 kW, 380 V, 50 Hz New sieve holes: Ø 30 mm Length/Width/Height: 1340/1250/1970 mm Weight: approx. 1100 kg

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Lsdoxvdryjpfx Ad Ashf Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 2011, operating hours: 875 h, Articulated Boom Lift Genie Z30/20N - Platform height: 9 m - Working height: 11 m - Lateral outreach: 6.5 m - Meter reading: 875 hours (read off) - Year of manufacture: 2011 - Drive: 48 Volt electric motor with integrated charger - Tyre size: 22x7x17 (tyres in poor condition) - Tread depth: 0 mm - Non-marking tyres - Wheelbase: 1580 mm - Drive configuration: 4x2 - Overall dimensions (L x W x H): 5300 x 1200 x 2020 mm - Weight: 6599 kg - Basket load capacity: 227 kg - Rotating basket - Hydraulic basket arm 1250 mm (rotatable) - Basket dimensions (L x W): 990 x 650 x 1100 mm Lodjyq Alispfx Ad Aohf - Basket and ground controls Further details and additional pictures available on request. This description does not constitute a binding offer and may contain errors. No guarantee on all details. Please also visit our homepage.

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Lhedpfeur A Uxjx Ad Ajf

Condition: ready for operation (used), Bosch SM 20/30 LN servo module 310606, used, was only briefly in test use, 100% functional, scope of delivery as per photos Ledpfji D Udgox Ad Aohf

Condition: ready for operation (used), maxon EC Motor 301782 Ø 30 mm 60 W with Hall sensors + Encoder MR, Type ML, 500 pulses, 3 channels, with line driver, 24V used, normal signs of use, 100% functional, scope of delivery as per photos Lhodpoi D I Itofx Ad Aef

Condition: ready for operation (used), Indramat KDV 4.1-30-3/S100 / 258255 power supply SN: 258254-01072, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Lhodpsx Etynjfx Ad Aof

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper AG 0303, unused in original packaging, 100% functional, scope of delivery as per photos Lhedpfx Aox Eudhjd Aef

Condition: new, Schunk PZN-plus 80/2 3-finger centric gripper HA 030135, unused in original packaging, 100% functional, scope of delivery as shown in photos. Lhodex Eudnjpfx Ad Aef

Condition: new, Schunk PGN100-Plus stroke 2, 2-finger parallel gripper 371 152 HA 050420, unused in original packaging, 100% functional, scope of delivery as per photos. Lhjdpfox Euc Rox Ad Aef

Condition: like new (used), Year of construction: 2021, operating hours: 9,525 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,400 mm, table length: 2,800 mm, table width: 3,100 mm, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece weight (max.): 52,000 kg, spindle nose: HSK 63A, controller manufacturer: Heidenhain, controller model: 640, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Gantry Milling Machine PARPAS Model DIAMOND LINEAR 30 Numerical control Heidenhain 640 Cross travel (X): 2,600 mm Longitudinal travel (Y): 3,000 mm Vertical travel (Z): 1,400 mm Feed rates: 60,000 mm/min Continuous orthogonal head (TOE29T) C axis: +/- 370° A axis: +/- 110° Tool holder: HSK-63A Spindle speed: 20,000 rpm Spindle power: 37 kW Table: 3,100 x 2,800 mm Lhedpfjwzv Umex Ad Aef Load capacity: 6 t/m² Tool magazine: 60 positions Equipped with: - 2 chip conveyors - HR550FS handwheel USED MACHINE YEAR 2021

Condition: new, Year of construction: 2024, * Ashita Power AG3-30 Emergency Generator 30kVA * 30kVA * 400V Lodpfx Aex U N I Hjd Aehf * 50Hz * R.P.M.: 1500 * Model: ZH490D ---- Internal vehicle number: 11373 Errors and prior sale excepted.

Condition: used, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2008, next inspection (TÜV): 04/2026, total width: 2,280 mm, total height: 2,500 mm, Equipment: crane, KLAAS-ALU Cranes Trailer with 2 axles Type: K 20/30 TS Permissible total weight: 3500 kg Axle load front: 1750 kg Ledpfxownu Hho Ad Aehf Axle load rear: 1750 kg 30 meters hook height 20 meters horizontal reach 4x hydraulic support points Load capacity: 1300 kg Year of manufacture: 2008 Operating hours: 2791 h Equipment: + Diesel drive + Wheel drive (mover) + Remote control We are happy to support you also with financing/leasing through our partners. All information without guarantee. Errors and intermediate sales reserved.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 15,542 h, machine/vehicle number: 37/7, control type: CNC control, controller model: RAS System 6000, working width: 3,200 mm, sheet thickness (max.): 2 mm, TECHNICAL DETAILS Working width: 3,200 mm Max. sheet thickness: 2.0 mm Backgauge: 3,050 mm Lhjdpewyv Rxjfx Ad Aef Control: CNC Control type: RAS System 6000 Motor power: 3.3 kW MACHINE DETAILS Dimensions & Weight Overall length: 4,400 mm Overall width: 2,100 mm Overall height: 1,500 mm Unladen weight: 3,500 kg Operating hours: 15,542 EQUIPMENT Documentation available CE marking available Transport packages: 3

Condition: new, Year of construction: 2025, * Ashita Power AG3-30 emergency generator 30kVA * 30kVA * 400V * 50Hz * 1,500 RPM * Model: YN27BNJ25 Lhedpfx Adex Tykpe Aef ----We have multiple units of this model in stock Internal vehicle number: 11287 Subject to errors and prior sale. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: ready for operation (used), Baumüller GNAFF 100 MV servo motor with fan SN:873036 ,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lhedpei D E Ehsfx Ad Ajf

Condition: ready for operation (used), Year of construction: 2015, A KUKA robot is offered. Axes: 6, control: KUKA KR C4, payload: 16kg, reach: 3102mm, repeat accuracy: +/-0.07mm, net weight: approx. 700kg, operating hours: approx. 44.000h. Documentation available. An on-site inspection is possible by appointment. Lhsdpfx Adjxnz U Ae Asf

Condition: used, Year of construction: 2010, type of input current: three-phase, input voltage: 400 V, overall weight: 251 kg, cutting current: 130 A, air pressure: 4.5 bar, open-circuit voltage: 400 V, protection type (IP code): IP22, input current: 46 A, We are offering this used Kjellberg HiFocus 130, year of manufacture 2010. Model: HiFocus 130 Minimum output current: 20 A Minimum output voltage: 88 V Maximum output current: 130 A Maximum output voltage: 132 V Duty cycle: 100% Lsdpfxsygimxj Ad Ashf No-load voltage: 400 V Number of phases: 3 Mains frequency: 50 Hz Mains voltage: 400 V Mains current I₁max: 46 A Mains current I₁eff: 46 A Protection class: IP22 Insulation class: F Cooling type: AF Weight: 251 kg Minimum power consumption: 0.7 kW Maximum operating pressure: 0.45 MPa Test voltage: 17 kV If you have any questions or require further information, feel free to send us a message.

Condition: good (used), I sell a depth gauge of the well-known company Mahr EX 30 . Very good condition. Ljdpfxju Swkcj Ad Aehf

Condition: new, Year of construction: 2026, 150 t 3100 mm 2600 mm 400 mm 200 mm 600 mm Lhjdpfx Ajwyd Thed Aef

Condition: used, Year of construction: 2022, input voltage: 230 V, type of input current: AC, total width: 1,085 mm, total height: 1,050 mm, total length: 1,550 mm, working range: 1,000 mm, input current: 16 A, input frequency: 50 Hz, We are offering this used Q400 Trotec laser and an Atmos Duo Plus 230 extraction unit, including laptop, year of manufacture 2022. Model: Trotec Q400 and Atmos Duo Plus 230 Extraction Unit Airflow: 2×320 m³/h Pressure: 8,500 Pa Input voltage: 230 VAC Current: 16.0 A Power: 2.4 kW Frequency: 50/60 Hz Protection class: IP40 Trotec No.: 42335 Wiring diagram: AD 1.0 Date of manufacture: 10/2022 Serial number: 01422-19284 Laser dimensions: Length 155 cm × Width 108.5 cm × Height 105 cm Extraction unit dimensions: Length 54.5 cm × Width approx. 65 cm × Height 105 cm Engraving area: 100 × 60 cm Ledpfx Adjygl Das Aehf Collection only. Viewing by appointment. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Working range laser: 8000 x 2500 x 150 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 15000 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Lhodoxra Rwjpfx Ad Aof Length: 20200 mm Width: 4150 mm Height: 2620 mm Machine weight: 32500 kg