Used Fliegl Dhks 390 -25 M³ for sale (76,257)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 14 kg, maximum load weight: 35 kg, overall weight: 50 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, tire condition: 100 %, Further Information Chassis Low-bed Semi-Trailer Steel welded construction, kingpin plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-side operation, with straight lower part, without shift equalizer Foldable rear support 2x wheel chocks with holders Side underrun protection made of aluminum Quarter shell mudguards in front of and behind the axle assembly With mud flaps behind each axle 1x storage box, w = 2,350 mm x l = 730 mm x h = 640 mm, bolted transversely to the front of the gooseneck, with 2 storage trays Extendable widenings to 3,000 mm (not at rear bevel end) (Track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber boards on the gooseneck, transverse at the front 70 mm timber boards for extension to 3,000 mm Excavator arm recess starting above the rear axles and extending to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low-bed 3 pairs of 10 t lashing eyes at the front gooseneck, 8 pairs of 10 t lashing eyes in the low bed, 3 pairs of lashing rails in the driving lane area of the low bed, 3 pairs of 10 t lashing eyes at the axle/rear area Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption With steering axle Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system, color-coded line routing for easier service. Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at front, without connection cable Attention: The trailer must only be towed by towing vehicles that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, without connection line With raise & lower valve, hold function in lowered position + auto-reset function Axle load detection via EBS CAN bus signal, displayable on the cab display (truck must be suitably prepared, no truck installation incl., not a calibrated scale) Vehicle Driving Stability System Trailer Infocenter for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights in LED 2 white/red lane guidance lights at the rear 2x 7-pin non-interchangeable sockets at the front, without connection cable 1x additional LED work light at the rear, switched via reverse light 1x LED rotating beacon with holder, switched via parking light (removable beacon) 2 pairs of warning panels, double, LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel / checker plate covering In the running lane area with 70 mm softwood flooring, in the wheel arch area steel / checker plate covering, low bed left and right in running lane area can be hydraulically raised, via truck auxiliary drive Rear bevel with 70 mm softwood decking Low-bed length approx. 6,300 mm Drop sides 25 mm aluminum hollow profile, 400 mm high, front and sides on gooseneck, plug-in Hsdsi Ri Hgopfx Ad Rjn Ramps Steel ramps, 2,800 mm long, 750 mm wide, side mo

Condition: used, axle configuration: 2 axles, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Air suspension rear - Air suspension front = Notes = Hodpfx Adoy Ada Ts Ren For inquiries about the vehicle, Mr. Seidel will assist you (by phone). Fliegl TPS 119 Flatbed Air suspension, 40 mm towing eye, Duomatic coupling, GFA axles, Knorr ABS, spring-loaded brakes, drive-on ramps, permissible gross weight: 11,900 kg, unladen weight: 3,250 kg, payload: 8,650 kg, cargo area dimensions: L 6,200 mm W 2,490 mm H 380 mm, tire tread depth: 1st axle 10 mm, 2nd axle 10 mm. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our homepage. ... Subject to errors, changes, and prior sale !!! - = Further information = Unladen weight: 3,250 kg Payload: 8,650 kg Gross vehicle weight: 11,900 kg Cargo area dimensions (LxWxH): 6200x2490x380 Last inspection: 2026-07 Please contact Tobias Ebert for further information.

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. Hedpjyt H R Ujfx Ad Ren The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, tire size: 235/75 r17,5, color: green, operation weight: 3,240 kg, Further information Welded steel construction, continuous tilting shaft at the rear with 80 mm ball tilting bearing, gear support foot at the front, folding rear support, wheel chocks with holder, steel underride guard, rear spray flaps across the entire width (not in conjunction with forklift bracket), quarter-shell mudguards, spare wheel, same make as basic tires, steel rim, loose, plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery)Note! Dropside touches storage box when folded down, lockable storage space for access ramps underneath the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (suspension bar for ramps at the rear) Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 300 mm BPW drum brake axles, laser-measured axle/chassis Reduction in tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) 2-line compressed air brake systemColor-coded cable routing for easy servicing, hand spindle parking brake Integral air reservoir, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connecting cable to the motor vehicle Hodpfxjk E Tdae Ad Ron 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck, hydraulic connection with SVK plug NW 10/3, incl. connecting hose, hydraulic actuation via truck power take-off Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, 5 tons each. Operating instructions: The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Hedpfx Adei Ri Eio Rjn Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, The images shown are archive photos. Further Information Chassis Center Axle Trailer Fine-grain steel welded construction Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Folding rear support 2 wheel chocks with holders Steel underrun protection, galvanized Quarter shell mudguards 1 plastic toolbox with shelf, dimensions: w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 open storage compartment for insert stakes, located under the loading area 4 pairs of stake pockets integrated into the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centered in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of insertable stakes, B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets/insert stakes are not designed for securing long loads, pipes, etc. by themselves without additional lashing Tandem trailer coupling Drawbar with certified 40 mm towing eye Drawbar mechanically adjustable in length 4 x 500 mm, from 1800 to 3800 mm, set to 1800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes Laser-measured axles/running gear to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line air brake system Spring-loaded parking brake Hsdpfx Aji Ri H Djd Rjn Integral air tanks 2 non-interchangeable trailer couplings at the front with connecting lines to the truck ABS and ALB, with ABS plug at the front with connecting cable Caution: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Floor About 30 mm thick phenolic plywood, designed for high point loads Note: Warping of the floor possible due to weather conditions! Platform length approx. 6,200 mm Operating Notes The specified gross weight is technically feasible; depending on the type of cargo, the gross weight may not be achievable in compliance with permissible axle, support, and saddle loads. Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame color: DB 7350 Nova Grey Attention: Archive photos!

Condition: used, Manufacturer: WIMACH-M Type: process vessel Single jacket Total volume: +/- 2750 Litres Useful volume: 2500 liters Hedpfxex R Dy Ao Ad Ron Stirring power : 0,77 Kw

Condition: used, axle configuration: 3 axles, first registration: 06/2015, color: other, Year of construction: 2015, = Additional options and accessories = - Lift Axle - Steering axle Hedoym Dchepfx Ad Rjn = Remarks = Fly, 2015, BPW axles, Axle 1 liftable, As 3 guided along, Unloaded by means of a sliding wall = More information = Rear axle 1: Lift axle Rear axle 2: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, The scope of delivery includes: 25x new leveling plates Suitable for manufacturer: Mecalux Material color: Sendzimir galvanized For frame profile: P 101 Material thickness: 1.00 mm Total width: 155 mm Hodowa Npzjpfx Ad Rjn Total depth: 110 mm Hole diameter: 15 mm Number of holes: 2 Weight | Unit: 0.130 kg Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, tire size: 445/45 r19,5, Year of construction: 2014, Further information Fine-grained steel welded construction 1 gear support foot at the front, with straight lower section and single-sided operation in FR right Wheel chocks with holder, aluminum side bumpers, steel underride guard Half-shell mudguards protrude slightly over the main frame, bumpers at the rear Tandem trailer towing device Towbar with tested 50 mm towing eye, forwarding agent version, under-coupler towbar Axles + suspension BPW disc brake axles, manufacturer's choice Air suspension with lift & lower valve Hodpfx Adjni Udzj Ron Wheels and tires 445 / 45 R 19.5, manufacturer's choice, steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake, Duomatic connection at the front, with connecting cable to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable Make Haldex, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Floor: Platform length approx. 7,300 mm, screen-printed floor Front wall: aluminum approx. 1,200 mm, steel corner stanchions in volume design Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin plug at the front, with connecting cable Approval / plates Country of registration: Germany, with Dekra approval and certificate 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT22001011091, empty load weight: 5,340 kg, maximum load weight: 12,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2021, tire size: 235/75 r17,5, Year of construction: 2021, Further information Chassis Central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at front Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflap Mudflaps in front of each axle and anti-spray mudflaps behind each axle Hjdpep N Dguefx Ad Ren 1x spare wheel holder for 1 spare wheel, with wheel mounting kit 1x spare wheel, brand same as original tires, steel rim 1x stainless steel toolbox, b=600/h=400/d=500 mm, with polished, lockable door Low-loader lashing rings 5 pairs of stake pockets recessed in outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 7 pairs of lashing mushrooms recessed on top and side in outer frame, each rated at 10 t 2 additional pairs of folding lashing rings recessed in low-bed area, each rated at 10 t (1 pair at the front and 1 pair in rear slope) Central axle trailer drawbar Drawbar with certified 50 mm towing eye Axles & suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Axle spacing 1810 mm (allows 10 t axle load, technical) Air suspension Brake system 2-line compressed air brake system, color-coded for easy service Spring-actuated parking brake Duomatic connection at front with connecting line to the towing vehicle EBS, electronic brake system with EBS plug at front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN-bus signal for display in cab, truck must be pre-equipped, no truck installation (no calibrated scale) Wheels and tires 235/75 R17.5 Fulda brand Steel rims, factory silver Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with holder, controlled via parking light (removable beacon) Floor 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear slope with Mega Grip surface made of serrated grating Low-loading platform including rear slope: 6500 mm Front bulkhead / corner posts 25 mm aluminum hollow section, 400 mm high, detachable Ramps Steel ramps, 3600 mm long, 750 mm wide, split with cable pull extension, laterally adjustable Ramp spacing, minimum gap approx. 600 mm, maximum outside width approx. 2880 mm Ramp surface with Mega Grip made of serrated grating Hydraulic operation via own electrohydraulic unit mounted in steel box; operation on right side of vehicle. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in combination with hydraulic ramp operation)

Condition: used, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, tire size: 385/55 r19,5, Further information Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, 14 pairs of lashing eyes embedded in the outer frame, 2.5 tons each, outer frame with Load-Lock profile for lashing strap attachmentNote! Cannot be used with drop sides! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation 2-stage pull-out ladder at the rear, side door locks, wheel chocks with holder, aluminium side collision protection, galvanized steel underride guard, quarter-shell mudguards in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, impact protection at the rear, spare wheel holder for 1 e-wheel, with wheel fastening set, plastic tool box SAF disc brake axles, air suspension 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, vehicle driving stability system, TPMS Haldex tire pressure monitoring system, in conjunction with Infocenter 24 volt, multi-chamber lights in LED, amber LED lighting at the side, 2 white position lights at the front in LED, 2 white/red lane departure warning lights at the rear in LED, 2 x 7-pin interchangeable sockets at the front, without connecting cable, LED safelight, top in corner stanchions at the rear Floor: screen-printed panels approx. 30 mm thick, cross joints with Omega inlay, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front end wall/front corner stanchions: 2,600 mm high, steel corner stanchions in volume design, release device for side tarpaulin on front wall, bottom inside at approx. 140 mm height with steel impact protection Center stanchions: 5 sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. (3 x in FR.- right and 2 x in FR.-left), 5 stanchion positions (3 x in FR.- right and 2 x in FR.-left), aluminum insertion slats Rear steel corner stanchions up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin with welded-in horizontal and vertical straps, reinforcements for stanchions Quick Lock system for side tarpaulin with central lock, one-sided in FR left, stainless steel tension locks in FR right, tarpaulin with recessed vertical slats as load securing tarpaulin, one-sided in FR left (then only 2 pairs of central stanchions in FR left) Roof: sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white, lifting roof, can be raised mechanically by approx. 380 mm, lifting roof can be opened when doors are closed Hedpfx Adokyrlzj Rsn Country of registration: Germany, test approval according to EC 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, reflective strips: white, continuous on the side tarpaulin at the bottom and at the top in the corners Reflective stripes: red, all-round on the rear porta

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, tire size: 385/55 r19,5, Fine-grained steel welded construction, fifth-wheel plate with replaceable double kingpin. Note! For frame neck height of 30 mm, the truck wheelbase must not exceed 3,700 mm! Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note! To attach straps in conjunction with sideboards, the sideboards must be opened! Not permitted in the neck area! 10 additional pairs of lashing rings recessed into the outer frame, each rated at 2.5 t, outer frame with Load-Lock profile for lashing straps. Note! Not usable with sideboards! 24 t, two-speed landing gear, single-sided operation, with straight lower section, without thrust compensation. Folding front supports extendable and tiltable outwards in front of the bulkhead. In driving position, set as far inward as possible (for detaching under load), without supports. Extendable ladder at the rear, side door retainers, chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of and behind each axle, antispray mud flaps behind each axle, rear underrun protection. Heavy Blocker rear underrun protection, heavy duty pallet stops on both sides, approx. 20–25 mm high, with lashing option every 200 mm. Load height is reduced by approximately 20–25 mm. Plastic toolbox included. SAF disc brake axles, air suspension, without lift axle. 2-line compressed air braking system, spring-loaded parking brake, 2 tamperproof coupling heads at the front, no connecting line, EBS (Electronic Braking System) with EBS socket at the front, without connection cable. Caution: The trailer may only be towed by tractors that ensure the effectiveness of ABS! With lift and lower valve, vehicle stability control system. 24 volt multi-chamber lights, yellow LED side marker lights, 2 white position lights at the front, 2 white/red contour lights at the rear, 2 × 7-pin and 1 × 15-pin tamperproof sockets at the front, no connection cable included. Floor: Front area with steel floor and anti-slip coating, phenolic plywood panels approx. 30 mm thick, transverse joints with omega insert, longitudinal bearers for high point loading capability, suitable for forklift axle loads up to max. 7,100 kg, steel/chequer plate surface in wheel area. Front bulkhead/corner stanchions: Height 2,580 mm, steel corner posts in volume design, release system for side curtain at front bulkhead, inner lower edge equipped with steel impact protection at approx. 140 mm height. Intermediate stanchions: 3 pairs of sliding posts adjustable along the full length, with four-fold insert pockets and long lower pocket, 3 pairs of upright positions, aluminium insert slats. Rear corner stanchions in steel up to lower edge of roof, curtain attachment with round tube and tensioning ratchet, rear portal doors, double-leaf with two internal locking bars per leaf. Hjdpokyrlwjfx Ad Rsn Curtain with welded horizontal and vertical belts, tension latches made of stainless steel, customer lettering on the rear portal. Roof: Sliding roof cover, rear end liftable, roof can be pushed from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, curtain colour: white. EcoLift - roof liftable by approx. 380 mm with gas spring assist, Anti-Ice system with central hose and automatic ventilation. Country of registration: Germany, type approval in accordance with EC 2007/46, load securing certificate according to EN 12642 XL (only valid in conjunction with 4

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm Hjdpfx Aoxqfyhsd Ron We have the possibility to stack trailers!

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm Hjdpfxjvzk Nao Ad Rsn 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT21801013661, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2024, total length: 9,770 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 265/70 R19,5", color: grey, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (basic version) approx.: 3,500 kg +/- build tolerance Payload approx.: 14,500 kg Axle load: 9,000 kg Overall length approx.: 9,770 mm Maximum overall width: 2,550 mm Roller track length approx.: 7,080 mm Loading height approx.: 1,150 mm Drawbar height approx.: 800 mm Drawbar length approx.: 2,500 mm Chassis: Turntable Waste Disposal Trailer Fine grain steel welded construction 2 longitudinal beams with cross members, upper side of longitudinal beams designed as a container roller track in wear-resistant version, loadable from the rear, with run-up slope. Suitable for roll-off containers of 6.0/6.5/7.0 m. Container locking system: - 2 pairs of locking hooks recessed in the floor - Pneumatic operation The container locking system is a 2-point, internally acting mechanism; containers with interior webs cannot be locked. (Suitable for transporting roll-off containers with subframe according to DIN 30722) (Roll-off containers are loaded and unloaded from the rear.) Heavy-duty turntable with robust ball bearing ring Wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of steel Half shell mudguards Lockable plastic toolbox, width=600 mm / height=425 mm / depth=460 mm Open storage box for container net Turntable trailer coupling Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension: SAF disc brake axles "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension with lift & lower valve Wheels and Tires: 265 / 70 R 19.5" (manufacturer's choice) 8 steel rims in twin arrangement, factory silver Brake System: 2-line compressed air brake system Spring-loaded parking brake Drive-away lock: When the container lock is open, the spring-loaded parking brake is activated. Vehicle – Driving Stability System: Hjdpsyxq H Eefx Ad Rsn Duomatic coupling at the front with connecting line to the truck, 24V EBS electronic braking system with EBS plug at front, with connecting cable Note: The trailer may only be towed by vehicles that can ensure the functionality of the ABS! Electrics: 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connecting cable 2 additional LED work lights at the rear, operated via reverse light The images shown are archive photos; the vehicle may still be in use!

Condition: used, Furniture trolleys, furniture and plastic rollers, furniture transport trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trucks, table trolleys, assembly trolleys -Allocation: 16 storage rows -Intermediate dimension: 80 mm -Back: storage compartment -Version: 4x swivel castors Hodef A E E Tjpfx Ad Ron -Price per piece -Quantity: 14 pieces -Dimensions: 1625/1345 / H1390 mm -Weight: 82 kg / piece

Condition: used, machine/vehicle number: WFDFLT21301009183, axle configuration: 2 axles, first registration: 12/2019, color: other, Year of construction: 2019, Please contact us for more information. Hsdpfxjx Sdaxs Ad Rjn

Condition: used, machine/vehicle number: WFDFLT21301008851, axle configuration: 2 axles, first registration: 06/2019, color: other, Year of construction: 2019, Please contact us for more information. Hodpfx Aexbf Dujd Rsn

Condition: good (used), Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: MO Weidmann, material lift assembly lift Hjdpfx Ajl U E Ttsd Ren -Load capacity: max. 225 kg -Lifting height: max 1.78 m -Equipment: with winch, with standard fork -Dimensions: 1240/690/H2230 mm -Own weight: 76 kg

Condition: ready for operation (used), Mitsubishi HD 101-12 servo motor Z636438 SN: N25439018,used, good condition, 100% functional, scope of delivery as per photos Hjdpfx Aeufcdxod Ren

Condition: ready for operation (used), Heidenhain UVR 130D converter, Id. 377 639-01 SN25616462H, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Hedsx Etrqspfx Ad Rjn

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Lift axle * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire size: 385/55R19.5 * Total length: 13,850 mm * Unladen weight: 6,067 kg * TÜV & SP: expired -----Subject to errors & prior sale Vehicle number 5726 WhatsApp support available! Hsdpfevhvcfsx Ad Rjn If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, overall weight: 39,000 kg, first registration: 08/2021, next inspection (TÜV): 10/2025, loading space length: 9,500 mm, loading space width: 2,450 mm, loading space height: 2,150 mm, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Fliegl Aluminum Tipping Semi-Trailer - 48 cbm - Lift axle - SAF axle - Swing doors - LED work lights - Next technical inspection due: 10/2025 - Safety inspection due: 04/2026 Subject to errors and prior sale. Internal vehicle number: 11351. Hedpfoxcr H Eex Ad Ren WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire size: 385/55R19.5 * Overall length: 13,850 mm * Own weight: 6,097 kg * TÜV & periodic inspection: expired -----Subject to errors and prior sale Vehicle number 5732 WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp Hsdpovhv H Rofx Ad Rsn