Used Farrag Tech Gmbh Card 70S for sale (73,978)

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW Rjdsg Ewwropfx Ammju *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Rjdpjw E H E Rofx Ammou Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm Rodpjwh Rp Ejfx Ammeu - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters Redpsxdm Awofx Ammsu - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg Rsdpjxtfv Isfx Ammeu - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity Rodpfsin Ewljx Ammeu - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel Rodpjddv Itofx Ammeu -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: used, Year of construction: 2007, operating hours: 6,383 h, functionality: fully functional, machine/vehicle number: 172, ATV Technologie GmbH Tabletop Quartz Tube Furnace, PEO 601 Model: PEO601 Condition: Used Technical Data: 230/400V AC 50Hz 16A 6.3kW 20-1000°C General Information: Year of manufacture: 2007 Rsdpfxew Dbrvo Ammou Serial number: 172 Operating hours: 6,383 Compact tabletop unit for Plasma Electrolytic Oxidation (PEO) or Micro Arc Oxidation (MAO) Equipment for firing or annealing electronic components Designed for surface treatment processes of aluminum, magnesium, and titanium Produces ceramic coatings on metal surfaces that are particularly hard, corrosion-resistant, and temperature-resistant Programmable firing furnace with precise temperature control Maximum temperature range: up to approx. 1,000°C Heating rate: approx. 100°C/min Processing chamber: diameter approx. 112 mm (4½″), suitable for wafers up to 100 mm Application in semiconductor, micro, and nanosystem technology Ideal for research, development, and small series production Microprocessor-based control with adjustable parameters (e.g., voltage, current, time) Integrated control panel with digital displays RS-232 interface for process data monitoring and control Optional connection for process gases (e.g., N₂, H₂) Accessories: Scope of delivery as shown in the photos

Condition: excellent (used), Year of construction: 2019, Laser source: Rsdpoxzuimsfx Ammou Manufacturer: SYNRAD, a Novanta Company Model: FSV40SFD Type: V40 Series: firestar Year of manufacture: 2018

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: Rodpjud H Dmefx Ammsu The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8 Rjdpfxjud N Hdj Ammou  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar Rsdpfxsw U N Ixs Ammju - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! Rodjxpvbtepfx Ammou TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: used, Year of construction: 2004, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: DRI 04320080, mileage: 100 km, overall weight: 7,000 kg, fuel type: diesel, color: blue, operation weight: 14,000 kg, maximum load weight: 15,000 kg, chain condition: 50 %, bar diameter (max.): 61 mm, pipe diameter (max.): 400 mm, Equipment: cabin, hammer hydraulics, rubber tracks, German horizontal directional drilling rig capable of drilling up to 200 meters in length, with a thrust/pull-back force of 15 tons plus impact (28 tons) with hydraulic hammer. Rubber tracks, max speed 3 km/h. Suitable for trenchless installation of pipes up to diameter 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, year 2004, 7,800 operating hours. Main components: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod containers, each with 48 drill rods x 3 meters = 144 rods (432 meters total) Control options: 1. Rod handling manipulator 2. Semi-automatic rod gripper and pulling system Mixing system (8056D) with hydraulic station (TT-M2) DRI 8904.B, Deutz 4-cylinder diesel engine, bentonite pump P-72, two bentonite preparation tanks (each 4,000 liters), two BÖRGER rotary pumps for mixing Rjdpjy H H Uuefx Ammju Connection cable for mixing unit Bentonite hose reel 2 x drill heads Ø110 reamer, 5t swivel Ø280 reamer with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, sleeve) Price incl. VAT.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 30214501, turning length: 2,000 mm, total length: 12,000 mm, WFL Millturn M60/2000 WORKING RANGE center distance mm 2000 swing over bed, turning diameter mm 690 MAIN DRIVE AC-drive with 2 gear steps drive power 100% duty cycle kW 40 max. speed min-1 3300 max. torque at the spindle 100% duty cycle Nm 1830 TAILSTOCK quill diameter mm 140 quill travel mm 160 quill force (adjustable) N 3500-31000 quill with installed live center MK 5 Rsdeu Hl R Topfx Ammsu TOOL HOLDER (single tool holder, turning-boring-milling unit) AC-drive drive power 100% duty cycle kW 30 speed range max. min-1 6000 max. torque at the spindle 100% duty cycle Nm 315 travel vertical to the X/Z-plane (Y-axis) mm 300[-125/+175] pivot capability of the milling spindle (B-axis) ° -110/+90 spindle head acc. DIN 69893 HSK-A100 spindle diameter in front bearing mm 100 DIMENSIONS length (max. tool magazine) m 11 width/height m 3,9/3,3

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 4 t, filling opening width: 730 mm, filling opening length: 400 mm, bale length: 700 mm, bale width: 350 mm, bale height: 500 mm, bale weight: 40 kg, total width: 988 mm, total height: 2,033 mm, total length: 752 mm, type of input current: AC, input voltage: 230 V, overall weight: 380 kg, noise level: 60 dB, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, Fully functional and tested vertical baler for packing small quantities of cardboard or plastic. Rjdovy Drxopfx Ammeu More information or photos by email or phone.

Condition: used, The trustee will sell Redpfx Aswaxw Ismmou The AMI Förder – und Lagertechnik GmbH manual sorter consists of, among others, – Three packaging lines, each 30 m long, with roller racks arranged along both sides of each line – A system of pneumatic belt and roller feeders with scanners – Meler Micron 5 – devices with a piston pump for glue application – Multibox type PCX 1816 cardboard folding/packing machine, year of manufacture 2007, machine manufactured in France – 2 pieces – Logopak labeller model 510+ III TB (SN PE00026247), year of manufacture 2018 – APS 10D 10 bar screw compressor (2 pieces) – screw compressors manufactured in 2017 – APX 24 dryer – working pressure (bar) 13, year of manufacture 2009. – Tank Komnino pressure type KP-1000-11/0.8 – year of manufacture 2014, serial number 1569 – Bizerba – labelling system – Roller conveyor line – line with roller conveyors with 7 storage fields for a maximum of 4 positions per field with an exit to 10 exit ramps The whole thing was dismantled by a professional company and put on pallets - ready for transport.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Overband Magnet Type UB 600 Operating voltage 3x400 V Frequency 50 Hz Rated operating current 5 A Operating speed 30 – 90 rpm Maximum sound pressure level 50 dB Machine weight 750 kg Location: Austria Available immediately Redpfx Amexy Hl Dsmeu

Year of construction: 2018, operating hours: 100 h, condition: used, functionality: fully functional, Force Maincylinder: KN 1.000 Redpfxolhqbre Ammju Capacity: car/hour 30 Measurement: 2,2x8 mxm Machine weight 18 to Place: Austria Available immediately

Year of construction: 2018, condition: excellent (used), functionality: fully functional, TYPE 318:: COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers following main advantages: - optimal rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Rjdpfx Aowbqx Hjmmju Drum diameter: 1600 mm Drum length: 4000 mm Drum height : 3270 mm TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates. Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency. The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum. The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses. The rpm of the drum is adjustable continuously. The drive is carried out by a three-phase motor 1.5 kW. Drum diameter: 1600 mm Electrical heating power: 126 kW Drum length:4300 mm Drum height : 2960 mm TYPE 361:: COOLING DRUM 1600 For cooling of sticky and hot extruded products under rotation for separation. The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC. Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed. Drum diameter :1600 mm Drum length: 4000 mm Drum height : 2890 mm

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Rsdpfoxd D Nzox Ammsu

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Westtech Woodcracker CS780 / incl. Power-Tiltator / incl. OQ 70/55 adapter plate / only 93 operating hours / year of manufacture: 2022 / immediately available / excellent condition! Price: €47,890.00 net / €56,989.10 gross Features: - Power-Tiltator, infinitely rotatable - Cutting diameter: 750 mm - Grab opening width: 1,600 mm - Own weight (basic - fully equipped): 2,000 - 2,200 kg - Recommended oil flow: 120 - 170 l/min - Recommended auxiliary circuit flow: 50 - 70 l/min Rodoyi R Dqjpfx Ammou - Recommended operating pressure: 280 bar - Carrier vehicle operating weight: 20 - 28 t - Tilt function for cutting process: automatic - Saw box: actively sprung - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. OQ 70/55 adapter plate We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We keep a large selection of various Westtech products in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide you with a tailored financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco Also, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Errors and prior sale excepted! Internal ID: 122025 = Additional information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Model - MIN.FM.Servo. Serial no. - 62006122. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Rjdpfx Amsza Eyujmou Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Model - ALritma S. Serial number - 2012050125405. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Rodpoy Uni Nofx Ammeu Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. Rjdpfoy Urtfjx Ammju All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.