Used Engel Es 1800/350Hl for sale (10,264)

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Pjdpfx Amjx Up U Topspr Unit 5550: 3700 cm3

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Ppodox Up Utspfx Ampsr Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Ppedjx Up Rnjpfx Amper Screw diameter: 120 mm Dosing stroke: 4,800 mm Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: good (used), Year of construction: 2006, operating hours: 107,027 h, functionality: fully functional, Clamping force 200 kN Psdpfsyvt Ugox Ampspr Screw diameter D55 mm Max. injection volume 511cm³ Mounting plates 860 x 860 mm Total weight 12.9 t

Condition: like new (used), Year of construction: 2007, operating hours: 33,988 h, Clamping force 50 kN Screw diameter D18 mm Ppsdpoyvt Rbefx Amper Max. injection volume 25.4 cm³ Mounting plates 500 x 455 mm Total weight 3800 kg

Condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich electric forklift -Type: GNM5460E-G18 -Motor: 24V/240W -Dimensions: 150/130/H365 mm Podpfx Aoi Dud Ssmpspr -Weight: 7 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, permanent magnet motor -Manufacturer: Engel, Permanent Magnet Motor Gear Motor with Brake -Motor type: GNM31650-G2.6-B5.2 -Voltage: 24 V / 50 W / 3000 rpm -Transmission: Type G 2.6 i= 30:1 -Shaft: Ø10 x 23 mm -Protection rating: IP54 -Brake: 0.5 Nm -Dimensions: 250/125/H95 mm -Weight: 2.4 kg Ppsdpfxei E Af Ao Amper

Condition: ready for operation (used), The conveyor belt of the company Engel is for sale Length : 3000mm Useful width : 400mm Höhenverstellbar: 1000mm-1250mm 2 swivel castors with brake 2 locking casters Ppsdpem E I Rlefx Ampjr

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ppsdpfx Amsyw Aa Usper Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Due to a company relocation in the field of cleanroom injection molding, I am offering for sale an ENGEL injection molding machine with only 11,300 operating hours, in like-new condition. Originally intended for another NYPRO facility, it is now being released for sale. Attached you will find: • Current photos of the machine • The order confirmation from ENGEL to NYPRO The original purchase price was approximately €330,000. The asking price is €87,500 including crane. Technical specifications can be provided upon request and are also listed in the documents below. The price includes: disassembly of the crane onto two Euro pallets, as well as removal of the machine from the cleanroom and loading onto your truck with a 15-ton forklift. Ppedpfswb Dl Tex Ampor If you are interested or have any questions, please feel free to contact me at any time.

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine: ENGEL DUO 5550/650 pico Control System: CC200 Year of manufacture: 2011 Operating hours: 61,606 h 1. Clamping Unit Clamping force: 6,500 kN Tie bar clearance (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Max. daylight between platens: 2,050 mm Max. mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm Max. injection volume: 2,740 cm³ Max. shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio: 20 Screw stroke: 430 mm Max. screw speed: 148 rpm Plasticising capacity: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: - 4 pcs. (installed on the fixed platen) 5. General Specification Two-platen machine (DUO series) designed for the production of large plastic parts. The design ensures high rigidity of the clamping system and allows operation with heavy moulds while maintaining a large opening stroke. The CC200 control unit enables precise process parameter control and integration with automation systems and peripherals. If you wish, I can also prepare: - a sales offer version (more marketing-oriented), Ppedpfjywrtwex Amper - translation into German or English, - or a market value assessment of this machine.

Condition: ready for operation (used), A large-format two-component injection molding machine Engel is available. Screw diameter: 120mm, metering stroke: 480mm, max. shot volume: 5430cm³, screw speed: 130rpm, L/D ratio: 20, plasticizing capacity: 132g/s, injection pressure: 1600bar, nozzle stroke: 950mm, nozzle force: 150kN, heating capacity: 80kW, pump capacity: 110kW, oil filling: 1600l, injection unit weight: 17t. Clamping force: 17000kN, opening force: 1230kN, opening stroke: 2550mm, mold installation height min./max.: 800mm/1600mm, max. platen distance: 3350mm, platen dimensions X/Y: 2640mm/2250mm, tie bar spacing X/Y: 1805mm/1405mm, tie bar diameter: 285mm, ejector stroke: 300mm, ejector force: 230kN, clamping unit weight: approx. 82t. Overall system dimensions X/Y: approx. 11500mm/7300mm, total system weight: approx. 100t. Documentation available. An on-site inspection is possible. Pedpsymfdgsfx Ampepr

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment features. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel sections with punched cross-members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch kingpin Underrun protection: * In accordance with EC regulations, bolted version Side guard: * In accordance with EC regulations Landing gear: * Landing legs with single-sided operation, static load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air-suspended axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Wheel connection: centre-guided 10-hole with ET 0 * Total air suspension travel approx. 200 mm (raising approx. 140 mm, lowering approx. 60 mm), controlled via rotary slide valve with detent function Ppsdpfowx Dcajx Ampsr Steering: * 1st axle as self-steering, 2nd axle fixed, 3rd, 4th, and 5th axles forced steered via linkage * Centralized grease points positioned externally Axle lift: * First and second axles automatically liftable, with additional manual override at the chassis Brake system: * Two-line compressed air brake system in accordance with EC regulations, with EBS and RSS, automatic load-dependent control, Wabco 4S/3M system * Spring brake cylinders as parking brake, tamper-proof coupling heads permanently mounted on the front cross member, without connection line to the tractor unit * Aluminum air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75x22.5 ET 0 rims – brand of our choice TPMS: * Tyre pressure monitoring system (TPMS) in accordance with ECE R141, with data transmission to tractor unit Mudguards: * In accordance with EC regulations, 1st axle front, 2nd axle rear, 3rd–5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray suppression flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of lashing rings in the side outer frame, evenly distributed (lashing capacity approx. 8 t) Stanchion pockets: * 10 pairs of stanchion pockets recessed into the outer frame * 6 pairs of stanchion pockets flush-mounted in the floor (outer longitudinal beam) Removable stanchions: * 16 galvanized plug-in stanchions, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stanchion magazine: * Each side, in front of the front wall, a magazine for 8 plug-in stanchions approx. 80/80 mm Front wall: * Bolted corner stanchions filled with aluminum box sections, interior with full-width and full-height steel collision protection plate Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame, flush finished Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber rear lamps * LED side marker lights * LED position lights, white, front * LED marker lights, rear * Number plate lights, 1x 15-pin and 2x 7-pin connectors at front cross member Equipment: * Two chocks with holders * Warning board according to ECE 70 * Work light at the lamp bracket (activated via reverse gear) * Holder for rotating beacon at the rear (includes beacon) * Each side left and right: 1 permanently mounted access ladder, including plug-in step * Smart Board * 'Vehicle swings out' sticker, load centre marking sticker Paintwork: * Chassis and front wal

Condition: ready for operation (used), Year of construction: 1998, Engel ES 330/80 HL .ST Pjdpfjvcrqnjx Ampspr Closing 80 tons Year 1998 Scrow 35 mm Spray softened 140 g

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: Ppedpfx Amswx Dctjper * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: ready for operation (used), Fagor MOCA-725 Vers. 09A Length scale with MC-A reading head Vers. 30A SN: 118001318050738 - total length: 82,5cm,used, good condition, 100% working, scope of delivery according to photos Podot Nbzfepfx Ampopr

Condition: ready for operation (used), Fagor MOCA-1145 length scale with MC-A reading head SN: 118001319060894 - total length: 125cm, used, minor signs of wear, 100% functional, scope of delivery as per photos Psdpfx Aet Iy Uzjmpjpr

Condition: new, Engel D 2965.1/2-G27-B5.15 motor, serial no. according to photo, unused, 100% functional, scope of delivery according to photos Ppjdpfxei D Hu Tj Ampor

Condition: new, Axesta Grossenbacher Axis Control IEEE 488 / 50 70 086 SN:9705180037, unused in opened original packaging, 100% functional, scope of delivery as per photos Ppedpfei D T Axex Ampjr

Condition: new, Axesta Grossenbacher Axis Control IEEE 488 / 50 70 086 SN:9705180044, unused, 100% functional, scope of delivery as per photos Ppedpfoi D T A Asx Ampor

Condition: new, Axesta 50 70 086 Axis Control SN:9705180034, unused in opened original packaging, 100% functional, scope of delivery as per photos Psdpfxei D T Aqe Ampjpr

Condition: ready for operation (used), Engel GNM 5440 motor 24 V SN:J33134 ,used, normal traces of use, 100% functional, scope of delivery according to photos Psdpfx Aji D Hvbjmpspr

Condition: ready for operation (used), Heidenhain ROD 700 18000 angle encoder Id. 203 741 61 SN:3514502H professionally fully overhauled and tested, with 6 months warranty, used, in good condition, 100% functional, scope of delivery as shown in the photos. Pjdpfjx Dwxpox Ampepr

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Ppedpfx Aox A Efhjmpsr TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Performance: 17,000 preforms/h MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Ppjdpfx Aoymn Insmper Operating hours: approx. 63,000 h Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel