Used Distributor for sale (376)

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle description for: TGS 35.520 8x2H-6 BL CH Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A) Commercial tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side exhaust silencer, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left 35 l AdBlue tank capacity, right Air compressor, 1 cylinder, 360 cc, with fuel-saving system Pneumatically controlled air dryer Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights Dsdpfx Aaowllmmo Ioku MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e Heated fuel filter, for fuels up to cleanliness class 25 Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge) Unlimited slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (overbending offset boom by up to 12°) Electronic overload protection with FX900 FASSI stability control FSC incl. LMB II Emergency stop, with optical alarm (90% and 100%) Pressure limiting and load holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied piped Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base Hydraulic outriggers, extendable on both sides, support width 8.84 m Supports operated via radio with proportional control block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hook and mounting clevises (short / 500 mm) Travel position: boom folded transverse to vehicle direction Note: Observe onboard voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 connection box Low profile foundation 180° hydraulically upward-and-outward swinging support legs / both sides Control system for auxiliary function - winch / xhe-dynamic Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work lights operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LEDs for 2 support legs, not mounted (crane) LEDs for 2 support legs, not mounted (additional outriggers) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Radio remote control V7 RCS Fassi radio remote control V7S: available with 6 or 8 functions, with linear levers or joysticks. V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Dedpfx Aow Sguwsa Ioku - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: used, mileage: 43,595 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 63,000 mm, total width: 25,600 mm, total height: 29,300 mm, Year of construction: 2009, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. [phone number]). Dsdpjz Dm Rxofx Aa Ijku Mercedes-Benz Atego 1018 A 4x4 with flatbed and tarpaulin !!! Available in multiple units !!!, A70 Front axle differential lock, A71 Rear axle differential lock, AF8 Axle ratio i = 4.875 (H4/H5), AH7 Rear axle H4, 7.7 t, ring gear 368, AK6 Front axle 6.1 t, B02 Anti-lock braking system (ABS), B43 Trailer brake, 2-line, B56 Front coupling head for air replenishment, B65 Air dryer, heated, BB6 Drum brakes on front and rear axles, BB9 Pipeline rupture protection for braking system, C42 Stabilizer bar, rear axle, under frame, CC9 Omission of protective device, side, CL9 Power steering LS 6/LS 8, CR4 Mounting parts on the frame/hole pattern, CU0 Foldable under-ride guard, rear (Meiller), D15 Roof hatch, swiveling, D17 Turntable, E10 Camouflage light circuit, E21 Battery(ies), reinforced, E30 Battery main switch, 1-pole, E31 Power socket, E40 Trailer socket, 7-pole, E41 Trailer socket, 12-pole, E55 Socket for trickle charging, 24 V, E70 Intercom system, with socket, NATO, EC6 Trailer socket, 15-pole, EM8 PSM, body and trailer CAN, ISO 11992, ES8 Additional socket 24 V/15 A, cab railing, F07 Cab, double cab, steel, F20 S-cab, 180 mm extended, F30 Cab tilting hydraulics, FE5 Electric window lift, driver and passenger door, FN1 Distributor cockpit, FQ7 Storage compartment above windshield, 2 compartments, FS9 Exterior mirrors, electric, driver side, FV7 Pre-equipment, installation package, FW2 Omission of immobilizer (transponder), FX7 Front mirror, aerodynamic, front, GC5 Transmission G 60-6/9.2-1.0, GS1 Manual gearbox, GV5 Transfer gearbox VG550 3W, H03 Air conditioning, H04 Additional thermal insulation, HF2 Pollen filter, I42 Tires 365/80 R 20 front axle, IA1 Wheel formula 4x4, IB4 Model series LKN, IC1 Flatbed chassis, ID1 Leaf spring suspension, IL1 Domestic (Germany), IL8 Left-hand drive version, IP6 Wheelbase 3260 mm, IU5 10.5-ton truck, IX4 Inline engine, 4 cylinders, IY2 Hydraulic fluid, Pentosin CHF 11 S, JD3 Tachograph, digital, EG, speed limiter + additional recorder, ADR, JK3 Instrument cluster, graphic display, fuel economy meter, JZ1 Tachograph manufacturer VDO, K40 Fuel tank lock, K45 Filter, fuel tank filler neck, K81 Fuel pre-filter, heated water separator, KBCA Air reservoir and air dryer offset in frame, KCAH Steel bumper, KCR5 Frame head reinforced for special superstructures, KCUN Overhang modification 1135 mm, KCYQ Towing eyes front and rear, screwable front (not according to STANAG), KD6 Exhaust gas monitoring for nitrogen oxides (NOx), KE8 On-board diagnostics 1.0 with NOx control, KFKV Cab tilting pump relocation, KFMP Cab installation package for BWFPS, KG0 Stainless steel muffler with SCR catalytic converter, KJ1 Main muffler, right, side on the frame, KK45 Filter for fuel tank filler neck, KKSN Main tank, right, 200 L, steel, (540x620x620), KKVD AdBlue tank, offset to the left, KLSH Protective grid for rear lights, KLSJ Protective grid for turn signal lights, KMJN Compact air filter, standing behind cab, KP1 AdBlue tank, 25 l, KP9 AdBlue container, plastic, KQ29 Trailer or towing coupling, manufacturer RINGFEDER, KQBA Automatic hook coupling; size: K2 D/UN763 (for drawbar eyes acc. to VG740, KTBB Weight variant 11 t (6.1/6.2), KZYC Painting, bare parts, L72 Electrical system, for external superstructure, M89 Intake air preheating for cold start, MB1 Engine brake, with constant throttle, MD4 Speed limiter 90 km/h, EG, MD9 Cruis

Condition: used, mileage: 233,232 km, power: 130 kW (176.75 HP), first registration: 01/2009, fuel type: diesel, empty load weight: 7,270 kg, maximum load weight: 220 kg, overall weight: 7,490 kg, fuel: diesel, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro4, suspension: other, number of seats: 2, total length: 7,700 mm, Year of construction: 2009, construction height: 3,380 mm, Equipment: ABS, air conditioning, airbag, central locking, differential lock, immobilizer system, Ruhtmann-Steiger Type T180 S7, .26112, Year 2009 Operating hours: 11,232 hrs Working height: approx. 18.10 m Lateral outreach: max. 12.70 m Basket capacity: up to 300 kg Standard equipment EURO 4 emissions standard, Axle configuration: 4x2, Electrically adjustable and heated exterior mirrors, 115 Ah battery, Cockpit distributor, Steel roof hatch, Cab: S (short), Suspension: leaf/leaf, 6-speed gearbox - Type: G 56-6, Urea (AdBlue) tank: 25 L, Urea (AdBlue) tank: plastic, Rear axle H 2, Crown wheel 325, Interior filter: pollen filter, Body/chassis: chassis, Atego 2 model update, Engine: 4.3 L - 130 kW diesel (OM 904 LA), Disc brakes, Side underrun protection, Cab seats: driver's suspension seat, Telligent brake system with ABS, Fixed rear underrun protection, Immobilizer, Perm. gross weight 7.49 t Special equipment Storage compartment on engine tunnel, Driver's side airbag, Dkodoyzkkpjpfx Aa Iju Audio system: CD radio, Rear axle differential lock, Aluminum air tank, Cab version: S (short with rear wall extension), PTO gearbox lock, Graphic info display with Eco meter, Air conditioning, Fuel tank: 105 L, Alloy wheels 6.75x17.5 (Speedline), 1-chamber heated air dryer, Fog lights, PTO MB 56-2B, Programmable special module, Brake system rupture protection, Rotating beacon left/right, Rear wall window, Cab seats: adjustable passenger seat, Voltage converter 24V / 12V 8 A, Rear mudguard splash protection, Reinforced rear axle stabilizer (for extremely high loads), Pre-wiring for phone/fax, Central locking with remote control, Auxiliary (air) heater Additional equipment Equipment has been determined via a VIN query; technical limitations may cause errors.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Dsdsynwxxepfx Aa Ieku Shipping by freight carrier possible, please inquire with your postal code.

Condition: used, Year of construction: 2022, OVERVIEW his TecnoBodega Ingeniería / TB Ingeniería C1EL self-adhesive labelling and capsule machine, manufactured in 2022, is designed for the application of front labels, back labels, tax stamps and capsules on bottles. The machine is suitable for compact bottling lines in wine, spirits, liqueur and beverage production. The machine is equipped with 3 labelling heads and can process bottle formats with a height range from 140 to 370 mm and a diameter range from 50 to 100 mm. It works with paper self-adhesive labels and supports label sizes from 40 to 105 mm in length and 18 to 150 mm in height. The system includes a bottle transport conveyor, infeed timing screw, independent self-adhesive labelling heads, capsule distributor and capsule application unit. It also features automatic speed regulation according to bottle flow and integrated machine safety systems. The machine is built in stainless steel with transparent safety guarding and is operated via a Weintek HMI terminal. The observed configuration includes label reel support discs, internal label dispensing heads, bottle guiding elements, timing screw and conveyor system. TECHNICAL DATA - Manufacturer: TB Ingeniería / TecnoBodega Ingeniería - Model: C1EL - Machine Type: Self-adhesive labelling and capsule machine - Year of Manufacture: 2022 - Number of Labelling Heads: 3 - Labelling Formats: Front label, back label and tax stamp - Label Type: Paper self-adhesive labels - Production Capacity: approx. 1,000 – 1,500 bottles/hour - Capacity for Shrink Capsules: up to approx. 2,000 bottles/hour on Bordeaux bottles Ø76 mm Dkodpfezdya Nex Aa Ieu - Bottle Height Range: 140 – 370 mm - Bottle Diameter Range: 50 – 100 mm - Core / Mandrel Diameter: min. 76 mm - Maximum Reel Diameter: 250 mm - Label Length Range: 40 – 105 mm - Label Height Range: 18 – 150 mm - Control Interface: Weintek HMI terminal - Included Components: Bottle conveyor, infeed timing screw, self-adhesive labelling heads with independent feed, capsule distributor, capsule application unit - Included Features: Automatic speed regulation according to bottle flow, machine protection and safety systems, compact line integration - Construction: Stainless steel frame with transparent safety doors - Safety: Emergency stop, safety guarding and warning labels - Condition: Used, installed in production environment

Condition: used, Year of construction: 2008, operating hours: 75,874 h, Compact hydraulic injection molding machine from KraussMaffei with MC5 control system and extensive peripherals. Manufacturer: KraussMaffei Machine type: Injection molding machine Model: KM 65-380 CX International size designation: 380 CX/65 Year of manufacture: 2008 Machine No.: 61011979 Clamping force: 650 kN Tie bar distance: 420 × 420 mm Max. mold opening stroke: 500 mm Min. mold mounting height: 250 mm Max. opening width: 750 mm Ejector stroke: 150 mm Control system: KraussMaffei MC5 Machine weight: 3,900 kg Operating voltage: 400 V Frequency: 50 Hz Fuse rating: 160 A Total current: 143 A Motor current: 37 A Peripherals: Frigel Microgel process cooler Frigel model: RCD80/12HHP Year of manufacture of cooler: 2014 Refrigerant: R407C Refrigerant quantity: 2.4 kg Cooling medium: Water Temperature range: -5 to +90 °C Max. pressure: 8 bar Weight of cooler: 240 kg Further visible peripherals: Distributor chute from M Fördersysteme, year of manufacture 2002 Djdpfxsz Au Hze Aa Isku Equipment: Material/parts handling and additional process peripherals as shown in the images. Location: Freiburg Available from APRIL 2027

Condition: used, mileage: 249,210 km, power: 320 kW (435.08 HP), first registration: 04/2011, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 7,560 kg, empty load weight: 18,440 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 2x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, electric glass roof, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, exhaust raised, automatic, fog lights, rotating beacon, storage box, leaf-air suspension, aluminum tank, noise reduction G1, last axle hydr. steered, U-protection, aluminum side bumpers, radio remote control, green environmental badge Dkedpfxjvhkmlj Aa Isu Wheelbase: 4200 mm Superstructure: Kroll suction and flushing superstructure approx. 12m³ (8500l sludge chamber/3500l fresh water) with radio control 9t front axle, axle load measuring device, rear axle H6 13t disk wheel 440, Telligent trailing axle hydraulically steered, disc brakes on front and rear axle, Telligent brake system with ABS and ASR, Front underride guard, additional stabilizer rear/trailing axle, sliding/lifting roof electric in glass version, starting aid, PSM, distributor cockpit, comfort locking system, Telligent gearshift II, pollen filter, reversing alarm, on-board diagnostics 2, transmission oil cooling, tank capacity: 300l, power take-off independent of transmission MB 1.4. High-pressure pump: Hammelmann, 1221 operating hours Vacuum pump: Wittig, 3340 operating hours ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, actuation type: electric, rotational speed (max.): 1,700 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 630 mm, table length: 800 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, Special Offer – 5% Discount Available! Industrial Radial Drilling Machine The Industrial Radial Drilling Machine is a robust and reliable solution designed for precision hole machining in production plants, maintenance workshops, and metalworking facilities. Its rigid construction ensures excellent stability, high accuracy, and dependable performance, even during demanding industrial applications. The machine is suitable for a wide range of machining operations, including drilling, reaming, countersinking, boring, and tapping. The large working range and adjustable radial arm allow efficient machining of large and heavy workpieces without repositioning. Main Features • Rigid industrial construction • Wide spindle speed range • High drilling capacity • Suitable for drilling, reaming, boring, countersinking and tapping • Stable and precise operation • Easy machine operation • CE certified Technical Specifications • Maximum drilling capacity: 50 mm • Distance from spindle nose to table: 400–1580 mm • Distance from spindle axis to column: 370–2000 mm • Spindle travel: 400 mm • Spindle taper: MT5 • Spindle speed: 25–1700 rpm • Number of spindle speeds: 16 • Column diameter: 350 mm • Main motor power: 4 kW • Table dimensions: 800 × 630 × 500 mm • Machine dimensions: 2500 × 1070 × 2840 mm • Machine weight: 3500 kg Applications Djdpfx Aeytf Thea Ieku • Drilling • Reaming • Countersinking • Boring • Tapping • Metal fabrication • Maintenance workshops • Manufacturing plants Delivery and Support The machine is supplied brand new and includes a 12-month warranty, warranty service, and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, mileage: 88,060 km, power: 115 kW (156.36 HP), color: yellow, gearing type: automatic, loading space length: 60,600 mm, loading space width: 24,500 mm, loading space height: 25,200 mm, Year of construction: 2020, Equipment: ABS, power assisted steering, For vehicle inquiries, Mr. Seidel will assist you (by phone). Mercedes-Benz Axor 816 4x2 box body for furniture transport A1M Front axle, 4.1 t; A2B Rear axle, crown wheel 325, hypoid, 6.2 t; A5L Axle ratio i = 3.417; B1B Electronic braking system with ABS and ASR; B1C Electronic compressed air supply unit, low; B1F Heating for the electronic compressed air supply unit; B2A Disc brakes on front and rear axles; B4A Condensate monitoring for compressed air system; C2J Wheelbase 4,220 mm; C5I Mounting parts for flatbed body; C6A Steering ZF 8090; C6Z Reinforced stabilizer, underframe, rear axle; C7A Rear underrun protection (ECE); C7M Side guard, weight-optimized; D1B Standard driver’s air suspension seat; D1S Standard passenger’s air suspension seat; D1Z Middle seat with 3-point safety belt; D3X Flat fabric seat cover; D4A Standard dashboard; D4W Electric windows, both sides; D6Y Pollen filter; D7L Overhead storage above the windscreen, 1 compartment; D8A Roof hatch/vent; E0Y Battery cover; E1E Maintenance-free batteries, 2 x 12 V/100 Ah; E1N Generator 28 V/100 A; E3F Additional 12 V/15 A socket on the beltline; E3I Additional 24 V/15 A socket on the beltline; E5A Switch No. 1 for bodybuilder electrical system; F1X S-Cab ClassicSpace, 2.30 m, tunnel; F6C Tinted windscreen; F6I Heated front mirror; F6J Electrically adjustable main mirror, driver’s side; F7W Single-step cab entry; F8E Central locking; F8L Immobilizer with transponder; F8X Rain/light sensor; G0U Economy driving mode; G1B G 70-6/5.94-0.74 transmission; G5G Mercedes PowerShift 3; I0E Tubeless tires 215/75 R 17.5 front/rear; I4A 4x2 axle configuration; I5Q 7.5-ton vehicle; I6W Leaf suspension, rear axle; J1A 10.4 cm instrument cluster; J1O 2nd generation digital tachograph, ADR; J1S Tachograph manufacturer VDO; J3N Fleetboard Eco Support; J5S Radio with USB port and Bluetooth; J9D Pre-equipment for toll registration; J9N Pre-equipment for Truck Data Center 6 (DTCO); K0E Plastic tank 120 l, left; K3T AdBlue tank 25 l; K5M Lockable tanks; K5S Protective cap for AdBlue dosing system; K7I Exhaust system on right frame, tailpipe inward; L1B Daytime running lights; L1H Halogen fog lamps; M0S Noise insulation to ECE; M1H Engine OM934, inline 4-cylinder, 5.1 l, 115 kW (156 hp), 650 Nm; M5C Engine version Euro VI, D; Q1J Front spring 3.6 t, parabolic; Q2A Rear spring 4.6 t, parabolic; Q8L Crossmember for G135 trailer coupling; R0Z Wheel nut cover; R1A 6.00 x 17.5 tapered rim; S1D Stability Control Assist (ESP); S1H Lane Keeping Assist; S1P Active Brake Assist; S5A Speed limiter 90 km/h / 56 mph, ECE; S5Z Cruise control; S8A First aid kit; S8C Warning triangle; S8D Warning lamp; S8E Warning vest; T0F Weight option 7.49 t (3.6/4.6); U2I EBS control code, 4th generation; U3F Control code, Global AdBlue Sensor (GMS DEF); V1D Atego new distributor; V1W Standard; V2T Atego model generation 1; V6C Minimum equipment for flatbed/box vehicles; V7C Dry freight box body; V8A VIN chassis number; X2E EU type plate; X2T Maintenance documentation; X2Y Registration certificate, Part II, prepared; X3O Mercedes-Benz OnRoadService; Y1C Control for paint tones, solid double-runner; Y1G Cab paint allocation, topcoat line 2; Z3H Side marker lights, 1st position; Z3I Side marker lights, 2nd position; Z4D Inline engine, 4-cylinder. Cargo space dimensions: L 6,060 mm, W 2,450 mm, H 2,520 mm Gross vehicle weight: 7,490 kg Unladen weight: 4,975 kg Dsdpfxoyxklno Aa Ioku Payload: ...

Condition: used, mileage: 134,077 km, power: 160 kW (217.54 HP), first registration: 10/2020, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2026, color: silver, gearing type: mechanical, emission class: euro5, total length: 6,470 mm, total width: 2,460 mm, total height: 3,000 mm, loading space length: 3,800 mm, loading space width: 2,335 mm, loading space height: 400 mm, Equipment: ABS, crane, Mercedes-Benz 822 Atego MEILLER 3Skipper with PK7002 Crane 4x2 Suspension: Leaf / Leaf Wheelbase: 3.30 m Payload: 1635 kg Palfinger Crane Type: PKG 7001 2x Hydraulic outriggers 2x Hydraulic supports 5+6th function control + Grapple MEILLER Type: Three-way tipper Length: 3.80 m Width: 2.35 m Height: 0.40 m Special equipment: Trailer brake 2-line, Trailer coupling: Towing hitch, Trailer coupling: Center axle trailer G 250, Trailer socket 12V / 13-pin, Trailer socket 15-pin 7+7-pin, Trailer socket 24V / 15-pin, Audio system: CD radio, Graphic info display with eco-meter, Hydraulic connection for tipping trailer, Dkedpfxez Iur Ej Aa Iju Hydraulic pump (Meiller pump - 5 pistons - 254 / 1), Air dryer 1 chamber, heated, Engine brake with constant throttle, Auxiliary drive MB 2C, Auxiliary drive MB 60-2C with MPA, Parameterizable special module, Spare wheel holder behind rear axle, Rear window, Voltage converter 24V / 12V 8 A, Additional equipment: Axle configuration: 4x2, Exterior mirrors electrically adjustable and heated, Battery 115 Ah, Cockpit distributor, Roof hatch (steel), Differential lock rear axle, Cab: S (short), Suspension: Leaf / Leaf, Generator 80 A, Gearbox 6-speed - Type: G 56-6, Urea tank (AdBlue): 25 L, Urea tank (AdBlue): Plastic, Rear axle H 2, Crown wheel 325, Interior filter: Pollen filter, Fuel tank: 105 L, Atego 2 model update, Engine 4.8 L - 160 kW Diesel (OM 924 LA), Auxiliary drive MB 1C, Disc brakes, Side impact protection, Seats in the cab: Passenger single seat, fixed, Seats in the cab: Driver's seat, comfort seat, Rear underrun protection, fixed, Immobilizer, Permissible total weight 7.49 t We will be happy to assist you with financing/leasing through our partners. All information without guarantee. Errors and prior sales excepted.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatic - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front support approx. 14,000 KG Flatbed body with side boards 6200x2550x600 mm Dkedpfxezcr N Is Aa Ieu Footsteps Diamond plate floor Removable side boards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x Outrigger pockets 6 x Lashing eyes 6500daN Toolboxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile with lashing eyes 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-over wireless remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupler between main boom and fly jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extending knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS wireless remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping Sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger span 10.00m, Outriggers can be operated via wireless remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Observe the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S wireless maxi - 8 linear levers Proportional control block for outriggers 180° hydraulically extendable support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for Jib mounted for 2 functions Control system for additional function rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane Automatic rope winch control AWC - (Automatic winch Control) for JIB Automatic rope winch control Work lights can be operated via display or wireless remote control 1 LED work light mounted on the knuckle arm 1 LED work light mounted on the Jib LED for 2 support legs, not mounted (crane) LED for 2 support legs, not mounted (additional support struts) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB "L42""" Additio

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Dkodpfxezcr N Ue Aa Iou Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Dkodpfxszcr Nze Aa Ieu Danfoss D900 control block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: used, mileage: 176,675 km, power: 210 kW (285.52 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 11,010 kg, maximum load weight: 6,990 kg, overall weight: 18,000 kg, tire size: 12R22.5, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, seat heater, Vehicle location: Bovenden, depot, 2 comfort seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, Telligent gearshift, 16-speed gearbox, ABS (anti-lock braking system), auxiliary drive, raised exhaust, differential lock, fog lights, rotating beacon, leaf spring suspension, low-noise G1, sunroof, green environmental badge. Wheelbase: 3900 mm, body: 2-way rail/switch cleaner TWO-WAY Z200 with sweeping machine FAUN Viajet 6H, approx. 6 m³/approx. 8000 operating hours, 7.5t front axle, H7 13t rear axle, crown wheel 300, drum brake on front and rear axle, Telligent braking system with ABS and ASR, stabilizer rear axle, steel bumper, front underrun protection, PSM, pre-equipment for toll collection, distributor cockpit, Telligent gearshift, additional thermal insulation, pollen filter, auxiliary hot air heater 2000W, reversing warning, On-Board Diagnosis 2, transmission oil cooling, driver airbag, driver and passenger seat air-conditioned, auxiliary drive independent of transmission MB 1.0. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dodpfxevvk Ryo Aa Ieku

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Dkjdpfx Aajh Ad Sae Ieu Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Used condition - system was serviced / overhauled in 2018 for 155000 euros (rails / hoists) Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: used, mileage: 311,170 km, power: 235 kW (319.51 HP), first registration: 01/2008, fuel type: diesel, empty load weight: 11,180 kg, maximum load weight: 6,820 kg, overall weight: 18,000 kg, tire size: 12R22.5, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 4,350 mm, loading space width: 2,320 mm, loading space height: 700 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, mtl. house, swing seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, cruise control, switch 16, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, rotating beacon, storage box, leaf suspension, tow bar air-light-hydr, low-noise G1, lashing eyes, U-protection, pendulum flaps, roof hatch, crane at rear, emergency stop, grapple control, foldable, 2-point hydraulic outriggers, radio remote control, 2x hydr. extensions, green environmental sticker Wheelbase: 3900 mm Body: Meiller 2-sided tipper body with rear crane Hiab XS 099ES-2 HiDuo (BJ. 2007) & radio control 7.5t front axle, rear axle H7 13t disc wheel 300, ABS can be switched off, Telligent brake system with ABS and ASR, disc brake with full protection on front axle, drum brake on rear axle, rear axle stabilizer, steel bumper, PSM, pre-installation for toll collection, distributor cockpit, reinforced clutch, Telligent circuit II, construction site filter, on-board diagnostics 1.0, transmission oil cooling, MB 124-10c MPA N/M speed auxiliary drive. Load diagram: 2m-4850kg, 3.8m-2640kg, 5.4m-1840kg, 7.3m-1360kg! Grapple available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedpfsvhiplsx Aa Ieku - .

Condition: used, Year of construction: 2006, Overview  Dodowhkywopfx Aa Ioku This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  - Capacity: 9,000 – 12,000 bottles per hour - Formats: 75cl glass bottles (cider, champagne type) - Dimensions: L 200 cm × W 150 cm × H 250 cm - Application: Cone application (distributor, oven, spinner) Scope of Delivery  - Cone distributor - Cone oven - Cone spinner - Operator platforms

Condition: used, Year of construction: 2016, Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  - Formats: Flat 38 mm plastic caps - Dimensions: L 210 cm × W 75 cm × H 300 cm - Power supply: 0.2 kW - Application: PET bottles Dsdpfxow T S Rae Aa Ijku Scope of Delivery - Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 - Centrifugal distributor | Sacmi | - | 1997 - Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997

Condition: used, mileage: 512,745 km, power: 300 kW (407.89 HP), first registration: 08/2009, fuel type: diesel, empty load weight: 8,750 kg, maximum load weight: 9,250 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, next inspection (TÜV): 08/2026, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Mercedes PowerShift II transmission, Sleeper cab, 1 comfort seat, Seat heating, Power mirrors, Heated mirrors, Power window left, Power window right, Air conditioning, Sun visor, Cruise control, ABS (Anti-lock Braking System), Traction control (ASR), Constant throttle, Auxiliary drive, Automatic transmission, Differential lock, Tool compartment, ADR equipment, Leaf-air suspension, Trailer hitch with air and electrical connections, Aluminum tank, Low-noise G1, Underrun protection, 2 compartments, Roof hatch, Remote control, Green emissions sticker. Dkjdpfxey Ezquj Aa Iju Wheelbase: 3900 mm, Body: Esterer tank body with 2 compartments, approx. 13,870 l (7440 l / 6430 l) for heating oil / diesel, Remote control, 7.5t front axle, H6 13t rear axle, Bevel gear 440, Disc brakes on front and rear axles, Telligent braking system with ABS and ASR, Front underrun protection, ADR type class AT, Parameterizable special module (PSM), Pre-equipment for toll collection, Distributor cockpit, Mercedes PowerShift, Pollen filter, On-board diagnostics 2, Transmission oil cooling, Transmission lock for auxiliary drive, Tank capacity: 300 l, Auxiliary drive MB 124-10b flange and N-speed with 2 shafts. ADR valid until 08/2026! Measuring system calibrated until 2027! Recurring tank inspection valid until 08/2027! Leakage and function test valid until 08/2030! VIN: WDB9300311L431088! In 2021, repairs were carried out on the engine for approximately €9,000.00 (cylinder head, etc.)! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 Dksdjz E U D Nspfx Aa Iou - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Dkedpfxezqc U No Aa Ieu Cutting system for all 8 outlets Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Condition: used, mileage: 206,495 km, power: 170 kW (231.14 HP), first registration: 12/2005, fuel type: diesel, empty load weight: 7,750 kg, maximum load weight: 2,750 kg, overall weight: 10,500 kg, tire size: 14.5R20, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,380 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, central locking, differential lock, fog lights, immobilizer system, low noise, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden Features: Cab, driver's suspension seat, double bench seat, seat heating, rear window, electric mirrors, heated mirrors, 6-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, frame cladding, differential lock, fog lights, storage compartment, leaf spring suspension, trailer hitch (air, light, hydraulic), tie-down points, underbody protection, hinged flaps, sunroof, yellow environmental badge. Wheelbase: 3600 mm Body: 2-sided tilting body, accident damage to the cab! 4.7t front axle, 7.7t H4 rear axle, bevel gear 368, differential lock in front and rear axles, ABS, drum brakes on front and rear axles, stabilizer on rear axle for extreme high loads, PSM (Pneumatic Suspension Management), distributor cockpit, pollen filter, reversing warning, auxiliary heater 2000W, engine brake with constant throttle, fuel tank capacity: 125l, auxiliary drive NA MB 60-2C MPA low position N-speed. Dkodpfjzhl T Nsx Aa Iju Loading height approx. 1410mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm Dkedpozwuu Ujfx Aa Ieu MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: used, empty load weight: 3,782 kg, maximum load weight: 14,218 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2017, loading space length: 7,100 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2017, gearing type: other, driver cabin: other, Equipment: ABS, compressed air brake, * German vehicle * 1st owner * Condition as shown in photos * KRONE axle(s) * Disc brakes * Loading dimensions: 7.10 m x 2.45 m x 1.00 m * Wooden loading floor with lashing rails * DIN-compliant lashing rings * Aluminum side walls Dkjdpfsxf H Ezex Aa Iju * Removable intermediate stakes * Longitudinally adjustable drawbar * Storage box * EBS * ABS * ABV/ALB (automatic brake force distributor/automatic load-dependent braking) If a new TÜV inspection is required, we are happy to provide a quote from one of our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV certification, without new safety inspection (SP), and without new accident prevention regulation inspection (UVV). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and examination of the goods, so that buyers do not have any misconceptions regarding condition and suitability. Inspection and examination are possible and expressly desired at any time by prior appointment. All information is provided without guarantee. No liability is assumed for errors or incorrect details in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.