Used Diosna 200 Sp A D for sale (93,946)

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Suction Excavator | 204214 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31334 Equippo" is commonly used when looking up more details online. Bsdpfxjx Rpdme Ac Tjdg 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Diosna SP 200 AD spiral mixer with 2 bowls 200 kg dough suitable for all types of dough, thanks to the gentle kneading capacity in flour 125kg Bdodpfx Aoiwg R Tjc Teg bowl contents 300 liter tool drive 11/18.5 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: used, Diosna SP 160 AF spiral mixer with 2 bowls 160 kg dough frequency controlled digital control panel suitable for all types of dough, thanks to the gentle kneading capacity in flour 100kg bowl contents 260 liter tool drive 5.5/11 KW bowl drive 0.66/1.3 KW Bedji Aqhxepfx Ac Tedg hydraulic drive 1.1 KW

Condition: used, Diosna SP 200 spiral mixer 200 kg dough Bsdpfx Acerxzbmo Todg suitable for all types of dough, thanks to the gentle kneading mobile with permanently installed bowl short kneading time due to large kneading area easy to use smooth surfaces, easy to clean large power reserves, convincing quality assurance capacity in flour 125kg bowl contents 300 liter

Condition: used, Diosna SP 160 AFL spiral mixer with 2 bowls 160 kg dough Bsdjtz Hz Ispfx Ac Todg digital control panel suitable for all types of dough, thanks to the gentle kneading capacity in flour 100kg bowl contents 260 liter tool drive 5.5/11 KW bowl drive 0.66/1.3 KW hydraulic drive 1.1 KW

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bdjdpob Eg Nksfx Ac Tjg Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Invoices are issued either with 0% as intra-Community delivery.

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle Bdsdey Sqrbepfx Ac Tog * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Bodpfxsmnqc Hs Ac Tedg Preferred sale to dealers, tradespeople, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Loading possible

Condition: good (used), 16 tool holders of this size. €50 each Sale only within EU member states! No private sale. Bsdpjyzd H Rofx Ac Tjdg Any warranty rights are excluded. We do not accept any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and equipment, nor for compliance with any safety or environmental protection requirements mentioned in accident prevention regulations.

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Bodpfoxn Namox Ac Tsdg Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Year: 2025 New / Ready for Operation We are a manufacturer of replacement blades and spare parts for crushers and shredders. Please provide the manufacturer's name and machine type when inquiring.

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED Bdsdpfjzmxmmex Ac Tsg SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: new, Year of construction: 2026, High quality of execution and the attention to detail of all elements ensure reliable and long-term use of this modern folding machine. The application possibilities have been expanded even further by using the foot pedal. You can therefore bend at any tool position and you do not have to constantly use the clamping lever on the right end of the machine. This increases both accuracy and speed when positioning the workpiece on the bending edge. With this foot swivel bending machine you can bend the sheet from three sides. In the machine construction there is a space of 6 cm up and down for curved processing. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shear (max. Cutting capacity 0.8 mm / steel) + 350 euros The machine complies with the CE guidelines and has a 12-month guarantee. Delivery time: 2-4 days Bdedoc Nxwhopfx Ac Tsg We are looking forward to your contact!

Condition: new, Generally overhauled machine Bsdpfxox N Edyj Ac Tjdg Price: 7.000EUR Spiral dough mixer 120 kg dough Diosna Power in flour: 75 kg Bowl contents: 180 liter Digital control keyboard with program memory Cover with safety switch Castors with brakes Voltage: 400V / 50Hz / 3 N/PE Electric power: 6.5kW

Condition: used, mileage: 440,411 km, power: 65 kW (88.38 HP), first registration: 05/2008, fuel type: diesel, overall weight: 3,000 kg, gearing type: mechanical, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Bdjdpfx Aokq Al Nsc Tog 13-pin trailer socket, 100 Ah battery, 1-pole battery disconnect switch, rear door (opening angle 270 degrees), wooden floor in the cargo area, spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seats in the cab: double passenger seat, front stabilizer, step for the rear door, lining in the cargo/passenger compartment: plywood Additional equipment: 3rd brake light, driver's airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assist, headliner in the cab, lockable glove compartment, body/superstructure: high-roof van, child safety lock, fuel tank: main tank 75 liters, continuous cargo area partition, load securing/tie-down points, headlight range adjustment, engine 2.1 liters - 65 kW CDI CAT, wheelbase 3665 mm, low emissions according to exhaust standard Euro 4 Group III, sliding door cargo/passenger compartment on the right, maintenance interval indicator Assyst, heat-insulating glazing, permissible total weight 3.00 t * WDB9066131S280012 * First registration: 20.05.2008 * Net price Tel./WhatsApp:

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, ----- Bdodpeyl Ubfefx Ac Tog

Condition: new, Year of construction: 2025, Bending machine press brake from Prod-Masz with side cutouts for bending from top to bottom. Thanks to him, you can finish your windowsill. In the machine construction there is a space of 6 cm up and down for curved processing. It is a modern sheet metal bending machine that bends sheet metal from three sides. Folding bench RED PLUS 2200 / 0.8 incl. foot control and transport wheels Technical specifications: - maximum working width: 2200 mm - Bending performance: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 145 degrees - the cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop Bedpfxocntm Ae Ac Tsdg rear frame for holding the sheet front depth stops - Weight: approx. 230 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Transport wheels incl. We are looking forward to your contact!

Condition: new, Year of construction: 2026, "Prod-Masz" your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their particular flexibility, performance and versatility. Folding beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cutouts to the side 60mm / 45 ° recess Price: 5100.00 EUR rotary shears + 350 Euro Delivery date: every week Bedpjcv S H Aofx Ac Tjdg We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = machining area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 kW laser power Bedjk Ran Ejpfx Ac Tedg (* Prices vary depending on the configuration and laser power; this is a brand-new laser machine manufactured by us.) Laser machining: simple and highly precise – laser cutting with high speed and quality.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Bdsdpfeh R Tvtox Ac Tsg chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,500 rpm, position of the milling head: Testa ad assi ortogonali indexati - TTL2 25 360, spindle diameter: 180 mm, travel distance W-axis: 1,000 mm, table load: 100,000 kg, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, table length: 3,000 mm, table width: 3,500 mm, quill travel distance: 2,500 mm, quill diameter: 180 mm, spindle stroke: 1,000 mm, workpiece weight (max.): 100,000 kg, torque: 9,050 Nm, CNC BORING MACHINE PAMA mod. SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Axis X: 13,000 mm Axis Y: 5,000 mm Axis Z: 1,200 mm Bedeyxg Hbjpfx Ac Tjdg Axis W: 1,000 mm Total axial travel (Z+W): 2,200 mm Working feed on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: Boring spindle diameter: 180 mm Spindle carrier ram dimensions: 400 x 440 mm Spindle speed (3 ranges) max: 2,500 rpm Spindle power (S1): 91 kW Spindle nominal torque (S1): 9,050 Nm Spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal axis indexed head – TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Speed ratio: 1:1 Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max spindle nominal torque: 1,000 Nm TH 100 rotary-travelling table: Table dimensions: 3,000 x 3,500 mm Table load capacity: 100 Ton Central T-slot size: 36h7 mm Lateral T-slot size: 36h12 mm T-slot pitch: 320 mm Longitudinal travel V-axis: 2,500 mm Feed/rapid traverse V-axis: 10,000 mm/min Chain-type tool magazine with 80 tools (capacity CU 145 R80) Machine weight approx. 160/165 Ton Complete with: - Hinged belt chip conveyor - No. 02 side chip conveyors for rotary table - Fixed closed accessory magazine with 2+1 positions - Fixed tool rack (ISO50, 6 positions) - Internal and external tool coolant system, 30 bar - Wireless workpiece probe (Renishaw) USED MACHINE YEAR: 2009

Condition: new, functionality: fully functional, Year of construction: 2026, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, table length: 12,000 mm, cutting speed: 30,000 mm/min, workpiece weight (max.): 1,200 kg, input voltage: 400 V, type of input current: three-phase, overall weight: 17,000 kg, warranty duration: 24 months, working range: 300 mm, RotaKat 3D is a pipe and profile cutting machine designed and manufactured in Poland! Round pipe cutting diameter: 20 - 300 mm Square pipe size: 20x20 to 300x300 mm Laser power: 2 to 12 kW Bdodpeyigcajfx Ac Tjg Control system: Beckhoff Guides: Bosch-Rexroth Servo motor: Beckhoff, Bosch Precision mechanics: Gudell, Bosch-Rexroth Loading length (depending on configuration): from 3 m to 15 m Unloading length (depending on configuration): from 3 m to 15 m Waste-free cutting! 2D and 3D cutting Cutting of round, rectangular pipes and L, H, C, I profiles Real-time correction of pipe and profile deformation using a laser scanner. Option for automatic loading and automatic unloading. The cutting system enables sequential cutting of pipes and profiles of varying dimensions loaded onto the feeder (according to the execution order of programs). The machine can be custom-configured to meet the client's specific requirements.

Condition: new, Fully automated machines for the trapezoid roll forming, in various sizes. Please, contact us in order to receive further information as well as the technical documentation. Bdjdpfxjyr Nkbe Ac Tjg

Condition: new, Fully automated machines for standing seam sheet metal profiling (CLICK), available in various sizes and designs. We offer several standing seam profiles. Delivery times and machine configurations are determined on a case-by-case basis for each order. Please contact us for additional information and technical documentation. Roll forming machine. Bjdpfx Acey Rkuyo Tsdg

Condition: new, Fully automated roof tile profiling machines available in various sizes and designs. Our range includes over 60 roof tile patterns. Delivery time and machine configuration are determined individually for each order. Please contact us for further information and technical documentation. Bedeyu Sz Ijpfx Ac Tjdg

Year of construction: 2026, condition: new, functionality: fully functional, Welding table 1200x800x15, 28mm system (milled and countersunk holes, diagonal grid with metric division) Tools included in the set: - small tower 300mm – 1 pc, Bodpfxeyk Epdo Ac Tsdg - crescent – 1 pc, - slotted stop – 1 pc, - large stop – 1 pc, - 90-degree stop – 1 pc, - three-hole angle bracket – 1 pc, - knurled pin – 2 pcs, - disc – 1 pc, - prism – 1 pc, - vertical clamp – 1 pc, - forged clamp 120x300 – 1 pc, - pipe clamp – 1 pc, - adjustable clamp – 1 pc, - automatic clamp – 1 pc, - wheels – 4 pcs.