Used Cormak Wood Splitter 8 Tons Lup8E for sale (44,299)

Condition: as good as new (ex-display), CC2-2.7H chain conveyor with drive Length: 2.7 m Width: 3 m, distance between chains: 1.5 m Height: 0.89 m Bjdezn I Tlspfx Anujwr

Condition: as good as new (ex-display), Bed segment for the LT15 Start/Classic machine Bwjdpszn I R Rjfx Anuor Cutting length: 2.7 m Bed width: 0.91 m 2 supports, 1 clamp Adjustable legs

Condition: as good as new (ex-display), Three-row sliding conveyor for boards. Material is fed from a sorting table. Length: 2.4 m Height: 700 mm Width: 2.2 m Distance between chains: 1 m, with the option to mount additional chains every 0.5 m. Bsdpfx Aozn I N Tsnujwr

Condition: as good as new (ex-display), Conveyor belt for WM3500/WM4000 machine Conveyor belt length: 2.9 m Bsdpfx Anjzn I Ivjujwr Width: 900 cm Height: 1.05 m

Condition: as good as new (ex-display), Segment for the LT15 Wide machine Cutting length: 2.7 m Width: 1.07 m Bodpfx Anjzn I Hljujwr Manual: 2 supports, 1 presser Price per unit.

Condition: as good as new (ex-display), Cutting segment for the LT15 Wide machine. Bsdjzn Izvjpfx Anuowr Cutting length: 1.95 m Bed width: 1.03 m 2 supports, 1 presser Adjustable legs The stated price applies to 1 unit.

Condition: as good as new (ex-display), Roller table for EG800 multi-blade saw Length: 1.6 m Height to the top of the roller: 900 mm Bjdpjzn Iyfefx Anuswr Width: 738 mm

Condition: as good as new (ex-display), Bed segment for LT15 machines Cutting length: 2.7 m Bed width: 0.98 m Bodszn Ixzepfx Anujwr Without supports, clamps, and legs.

Condition: as good as new (ex-display), Receiving table for LT series machines Length: 1.8 m Height: 765 cm Width: 638 cm Bwedpfxozn Iu No Anusr

Condition: as good as new (ex-display), Receiving table for LT series machines, with side sheet metal panel. Length: 1.8 m, with a 2.5 m sheet metal panel. Width: 627 cm. Height: 754 cm. Bwedpfxozn It Ej Anusr

Condition: as good as new (ex-display), Intermediate sliding door Length: 1.25 m Height: 862 mm Width: 2.3 m Bwedpfx Anjzn Irhsujr

Condition: used, Bed segment for the LT15 Start/Classic machine Cutting length: 1.95 m Bed width: 0.91 m Bodpfx Anjzn Ip Houswr 2 stops, 1 pressure clamp Adjustable legs

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Z - 200 mm Bwjdpjyr Dawefx Anusr • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: new, Year of construction: 2026, Electric Mast Pallet Truck 1500 kg / 3000 mm – Efficient Handling of Pallets and Warehouse Loads The electric mast pallet truck with a 1,500 kg load capacity and 3,000 mm lifting height is a versatile device designed for transporting, lifting, and placing loads on warehouse racks. It combines high load capacity, compact construction, and adjustable fork spacing, making it suitable for handling pallets and loads of various dimensions. Bsdpfxozq Au Nj Anuewr Main Advantages 1,500 kg load capacity – enables transportation and lifting of heavy pallets, materials, and production components. 3,000 mm lifting height – allows goods to be stored on racks and improves the use of available storage space. Adjustable fork spacing – maximum spacing of 865 mm allows the forks to be adapted to different pallet and load dimensions. 1,150 mm long forks – suitable for efficient handling of standard palletized loads. 165 mm fork width – provides a large support surface for transported loads. 90 mm lowered fork height – allows convenient access to pallets placed directly on the floor. Foldable operator platform – improves comfort during frequent travel and operation over larger warehouse areas. Electric drive and lifting system – reduce operator effort and improve efficiency during repetitive handling operations. Adjustable Forks – Greater Application Flexibility Unlike machines equipped with fixed-width forks, this model allows the fork position to be adjusted. The maximum fork spacing of 865 mm enables the truck to be adapted to different load widths. This solution is especially useful in companies handling pallets, containers, boxes, and materials with varying dimensions. Properly adjusted forks provide stable load support and improve the suitability of the machine for different warehouse tasks. Each fork measures 65 × 165 × 1150 mm. The strong and wide fork arms provide a large contact surface with the load, which is important when lifting heavy elements and goods requiring stable support. Lifting Loads Up to 3000 mm The maximum lifting height of 3000 mm allows the device to be used not only for horizontal transportation but also for placing loads on warehouse racks. The truck can handle both lower and higher storage levels, improving goods receiving, order picking, and supplying production workstations. Equipment and Construction Features Electric travel drive. Electric lifting system. Mast with a lifting height of 3000 mm. 1150 mm long forks. Adjustable fork spacing up to 865 mm. Foldable operator platform. Side operator platform safety arms. Control tiller. Mast mechanism cover. Fork movement locking system. Technical Specifications Parameter Value Load Capacity 1500 kg Maximum Lifting Height 3000 mm Height with Lowered Forks 2080 mm Height with Raised Forks 3550 mm Lowered Fork Height 90 mm Overall Length Without Platform 2050 mm Fork Dimensions (W × H × L) 65 × 165 × 1150 mm Maximum Fork Spacing 865 mm

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK JDSA is a portable battery-powered strapping tool designed for securing parcels, cartons, bundled packages, and palletized loads. The device is compatible with polypropylene (PP) and polyester (PET) straps with widths from 13 to 16 mm and thicknesses from 0.4 to 1.2 mm. The JDSA is a handheld battery-operated strapping machine positioned directly onto the strap by the operator. The device automatically tensions the strap, joins the ends using friction welding technology, and cuts off the excess material. The strapping process does not require any additional metal or plastic buckles. The cordless battery-powered design allows unrestricted movement between packaged products and eliminates the need for a fixed workstation. The ergonomically designed handle provides a secure grip and improves operator control during repeated strapping cycles. The PP and PET strap tool is suitable for both individual shipment preparation and high-volume packaging operations where goods must be secured for storage and transportation. Adjustable Strap Tension The adjustable tension range of 900–3,200 N allows the operator to adapt the strapping force to the type of product being secured. The unit combines three functions in one device: Strap tensioning Friction welding Automatic strap cutting Properly selected tension helps stabilize loads and reduces product movement during handling, storage, and transportation. PP and PET Strap Compatibility The CORMAK JDSA works with both PP and PET straps, allowing the user to select the appropriate material depending on package type, load weight, and required securing strength. PP straps are mainly suitable for lighter parcels, cartons, and bundled packages. PET straps are recommended for heavier loads requiring increased tensile strength. Only straps with dimensions matching the machine specification should be used. Strap Tensioning and Friction Welding The adjustable tensioning speed of 100–200 mm/s improves efficiency when securing multiple packages and loads. After reaching the required tension, the operator activates the friction welding process. The strap ends are permanently joined, and the excess strap is automatically cut off. The approximate welding time is 2–5 seconds and may vary depending on machine settings and strap type. The process does not require additional metal or plastic seals. Actual operating efficiency depends on factors including: Selected tension force Strap type and thickness Welding parameters Operating temperature and working conditions Battery wear level A fully charged battery requires approximately 90 minutes. The cordless design makes it easier to secure large products and pallet loads that would be difficult to move to a fixed packaging station. Included Equipment CORMAK JDSA battery-powered strapping tool Li-Ion battery 14.4 V / 4 Ah Battery charger Operating manual Bedpfxszq Aa Eo Anujwr Technical Specifications Specification Value Model CORMAK JDSA Machine Type Battery-powered strapping tool Strap Type PP / PET Strap Width 13–16 mm Strap Thickness 0.4–1.2 mm Strap Tension Force 900–3,200 N Tensioning Speed 100–200 mm/s Strap Joining Method Friction welding Approximate Welding Time 2–5 s Battery Type Li-Ion Battery Voltage 14.4 V Battery Capacity 4 Ah Charging Time Approx. 90 min Cycles per Charge Approx. 250–350 cycles, depending on settings and operating conditions Tool Dimensions 380 × 130 × 130 mm

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA200 Automatic Strapping Machine The CORMAK BA200 is an automatic arch strapping machine designed for securing cartons, parcels, and collective packages with polypropylene (PP) strapping tape. The automatic strapping cycle significantly speeds up packaging operations and ensures consistent, repeatable securing of products prepared for transport. Once the cycle is activated, the strap is automatically fed around the product through the arch, tensioned according to the preset value, heat-sealed, and cut. The strap joint is made underneath the package, leaving the upper surface of the carton or parcel clean, aesthetic, and easily accessible. Adjustable strap tension from 0 to 70 kg allows the operator to adapt the strapping force to the type and strength of the packaging. The BA200 automatic strapping machine is ideal for warehouses, manufacturing plants, wholesalers, logistics centres, e-commerce companies, and shipping departments. Automatic Strapping and Heat Sealing After positioning the product inside the arch, the operator starts the cycle using either the foot pedal controller or the control panel button. The PP strap is automatically guided around the package and tensioned according to the selected setting. The strap ends are joined underneath the package using a thermal welding process. After sealing, the machine automatically cuts the strap and prepares it for the next cycle. The process does not require any additional metal or plastic buckles. Adjustable Strap Tension The 0–70 kg tension adjustment range allows the operator to select the optimal strapping force for different types of products. Lower tension settings are suitable for lightweight or delicate cartons, while higher tension provides stronger securing of heavier packages and bundled goods. Proper tension adjustment reduces the risk of package deformation and improves the repeatability and reliability of the strapping process. Integrated Product Handling Rollers Rollers integrated into the worktable make it easier to move and position cartons, parcels, and other products prepared for strapping. They also simplify repositioning when multiple straps are required. Mobile Design Transport rollers allow the electric strapping machine to be easily moved between workstations, providing greater flexibility when organizing the packaging area. The unit can operate as a standalone strapping station or be installed alongside an existing packaging line. Automatic electric strapping machines significantly improve repetitive packaging operations related to preparing products for storage and transportation. Included Equipment CORMAK BA200 automatic arch strapping machine Foot pedal controller for activating the strapping cycle Operating manual Technical Specifications Specification Value Model CORMAK BA200 Machine Type Automatic arch strapping machine Strap Type PP (polypropylene) Strap Width 9–15 mm Bwjdpfx Anjzqz R Neujr Strap Tension 0–70 kg Strap Joining Method Thermal welding Strap Joint Location Underneath the package Worktable Height 750 mm Table Load Capacity 80 kg Worktable Equipment Integrated rollers for product movement Mobility Transport rollers Motor Power 500 W Machine Dimensions 1400 × 628 × 1435 mm Weight 150 kg Inner Reel Diameter 200–210 mm Outer Reel Diameter 400–450 mm Reel Width 170–190 mm

Condition: new, Year of construction: 2026, CORMAK 560 × 2000 Universal Conventional Lathe The CORMAK 560 × 2000 is a heavy-duty universal metal lathe designed for professional applications in machine shops, toolrooms, maintenance departments, and industrial manufacturing facilities. Its robust cast iron construction, large turning capacity, and 103 mm spindle bore enable efficient machining of a wide variety of workpieces. Key Features Electromagnetic foot brake ensures maximum operator safety and minimizes downtime by providing rapid, reliable machine stopping. Hardened and precision-ground bed offers excellent rigidity and long-term resistance to wear and deformation. Heavy-duty cast iron machine frame absorbs vibration and improves machining accuracy. Rapid longitudinal and cross feeds increase machining efficiency and reduce cycle times. Precision spindle supported by high-quality ball bearings ensures smooth operation and extended service life. 103 mm spindle bore allows machining of long and large-diameter workpieces. 3-axis Digital Readout (DRO) provides precise positioning and improves machining accuracy. Construction and Technology The CORMAK 560 × 2000 has been engineered for intensive industrial machining. Its 350 mm wide induction-hardened bed and precision-machined slideways provide outstanding rigidity and repeatability. The machine features an ergonomic control panel, a clearly arranged spindle speed and thread selection chart, and a rapid traverse system that increases operator productivity. The headstock is equipped with a Camlock D1-8 spindle nose, allowing fast, accurate, and secure chuck mounting while maintaining excellent spindle rigidity. Machining Capabilities The machine is capable of performing a wide range of machining operations, including: Rough and finish turning Metric, imperial, module, and DP thread cutting Drilling and boring Taper turning Facing operations With a 560 mm swing over the bed and an impressive 785 mm swing over the gap, the CORMAK 560 × 2000 is particularly well suited for machining large and heavy workpieces while maintaining excellent dimensional accuracy and surface finish. Technical Specifications Distance Between Centres 2,000 mm Centre Height 280 mm Swing Over Bed 560 mm Swing Over Gap 785 mm Swing Over Cross Slide 355 mm Bed Width 350 mm Spindle Bore 103 mm Spindle Nose Camlock D1-8 Spindle Speeds 12 speeds, 25–1,600 rpm Maximum Tool Size 25 × 25 mm Longitudinal Feed Range 35 feeds, 0.059–1.64 mm/rev Cross Feed Range 35 feeds, 0.020–0.573 mm/rev Metric Thread Range 47 pitches, 0.2–14 mm Imperial Thread Range 60 pitches, 2–112 TPI Module Thread Range 39 pitches, 0.1–7 Module Diametral Pitch Thread Range 50 pitches, 4–112 DP Tailstock Quill Diameter 75 mm Tailstock Quill Travel 180 mm Tailstock Taper MT5 Main Motor (S1/S6) 7.5 / 9.0 kW (10 HP) Coolant Pump Motor 0.1 kW Machine Dimensions 3340 × 1150 × 1460 mm Weight 2,940 kg Standard Equipment 315 mm 3-jaw self-centering chuck (PO3-315 / D8) 350 mm 4-jaw independent chuck (K72-350 / D8) Service tool kit 450 mm faceplate Fixed steady rest (capacity up to Ø180 mm) Travelling steady rest (capacity up to Ø120 mm) Two dead centres CE-compliant electromagnetic foot brake Bwedpfxozqzxms Anuer Electromechanical spindle brake Filled with Shell Tellus 46 hydraulic oil Rapid traverse system Coolant system Halogen work light Change gears Chip tray 3-axis Digital Readout (DRO)

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Oil can Chip tray Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Tailstock Quill Travel 50 mm Tailstock Taper MT2 Bedpfezqzi Eex Anujwr Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. Bwjdpfx Ajx Agpzsnujr The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2026, DT2200M Downdraft Grinding Table The DT2200M is a professional downdraft grinding table designed to provide a safe and efficient workspace for metal grinding applications. Equipped with a high-performance filtration system and dual extraction fans, it is ideally suited for demanding industrial and workshop environments, effectively reducing airborne dust while improving operator safety and comfort. Key Features Dual-stage filtration system efficiently removes grinding dust and airborne contaminants High extraction capacity – two centrifugal fans rated at 4,000 m³/h each provide continuous operation with reduced filter replacement frequency Large working surface – the 2060 × 530 mm worktable accommodates larger workpieces with ease Heavy-duty construction – robust steel housing with spacious metal waste drawers on both sides of the table Construction and Technology The DT2200M features an 11-section work surface, providing flexibility for securing and processing various workpieces. An integrated downdraft and side-draft extraction system captures dust directly at the source, significantly improving air quality within the workspace. The high-temperature-resistant filter cartridges are designed for extended service life in applications involving elevated heat generation. Please note that the filters are heat-resistant but not fire-resistant. Precision and Performance Thanks to its high static pressure and two centrifugal extraction fans, the DT2200M achieves a filtration efficiency of over 99.9%. Independent filtration units and a quick filter replacement system reduce maintenance time while ensuring consistently high extraction performance. Applications The DT2200M is suitable for use in: Metal fabrication workshops Industrial paint shops Maintenance and repair departments Manufacturing facilities specializing in metalworking Standard Equipment Two centrifugal extraction fans Four filter cartridges (395 × 495 × 24 mm) 11-section work surface Metal waste collection drawers on both sides Integrated workpiece clamping fixtures Technical Specifications Specification Value Work Surface Dimensions 2060 × 530 mm Motor Power 2 × 1.0 kW Airflow Capacity 2 × 4,000 m³/h Filter Size 4 × (395 × 495 × 24 mm) Bwodpfjzqy Ruex Anujr Power Supply 230 V Weight 130 kg Overall Dimensions 2200 × 600 × 850 mm

Condition: new, Year of construction: 2026, CORMAK V3000 Hydraulic Gluing Press The CORMAK V3000 is an industrial hydraulic gluing press designed for bonding solid wood components, furniture panels, worktops, and laminated boards. Built around a heavy-duty steel frame and equipped with four hydraulic clamping units providing a combined pressing force of 10 tonnes, the machine ensures consistent production results and high-quality bonded joints. Key Features 4 × 2,500 kg clamping force – evenly distributed pressure ensures strong and durable bonding across the entire workpiece surface. Heavy-duty steel frame – high structural rigidity provides excellent stability and resistance to deformation, even during prolonged operation. Adjustable clamping units – quick and easy positioning allows the press to accommodate a wide range of workpiece sizes. Pressure locking system – maintains constant clamping pressure without the need for continuous adjustments. Spring-assisted side guide for hydraulic cylinders – ensures smooth piston movement and precise operation of the clamping units. Heavy-duty locking nuts – securely hold the selected settings, improving safety when working under high clamping forces. Construction and Technology The V3000 is manufactured from high-grade structural steel, offering excellent resistance to deformation and long-term mechanical fatigue. Each of the four hydraulic clamping units is mounted within a rigid guide system, ensuring accurate distribution of clamping pressure in both the horizontal and vertical directions. The simple adjustment mechanism allows the operator to position the clamping units with a minimum spacing of 240 mm, making the press suitable for both short and irregularly shaped workpieces. The large working capacity accommodates panels up to 1,550 mm in height and 3,000 mm in width. Precision and Performance The CORMAK V3000 provides a uniform distribution of clamping pressure, eliminating gaps and ensuring consistently strong adhesive joints. Stable clamping settings and an integrated pressure locking system improve process repeatability, making the machine particularly suitable for high-volume production. Bwsdpfx Aewcy T Aonujr The press is ideal for bonding solid timber, laminated panels, and frame components. Its intuitive operation requires minimal setup, allowing operators to focus on production quality and efficiency. Applications The CORMAK V3000 is ideal for: Manufacturing laminated furniture components and cabinet fronts Producing worktops, edge-glued panels, and laminated timber panels Woodworking shops and industrial facilities processing glued timber Manufacturing stairs, doors, windows, and structural timber frames Standard Equipment Four hydraulic clamping units Heavy-duty steel frame with a 3,000 mm working length Individual pressure locking mechanism for each clamping unit Spring-assisted side guides for the hydraulic cylinders Optional Equipment Additional hydraulic clamping units Quick-connect hydraulic coupling system for an external hydraulic pump Height-adjustable support stands Technical Specifications Specification Value Overall Height 2040 mm Overall Width 3000 mm Maximum Clamping Height 1550 mm Minimum Distance Between Clamping Units 240 mm Distance from Mounting Hole to Clamping Unit 50 mm Clamping Force 4 × 2,500 kg Total Weight 260 kg

Condition: new, Year of construction: 2026, CORMAK E910 Band Sawmill for Wood The CORMAK E910 Band Sawmill is an advanced band saw designed for professional sawmill operations. Featuring a robust four-column frame, a large cutting capacity, and a reliable 7.5 kW (400 V) electric motor, it delivers precise processing of both softwood and hardwood. An integrated blade cooling system and reinforced cutting head guidance make the E910 one of the most efficient and durable band sawmills in its class. Key Advantages of the CORMAK E910 Maximum cutting width: 915 mm (without log guides), 750 mm (with log guides) – allows cutting of large logs while maintaining excellent stability. Maximum cutting height: 740 mm – adjustable cutting head enables precise cutting of materials with various cross-sections. Cutting length: 6,000 mm – suitable for processing long logs without the need for repositioning. Dynamically balanced cast-iron flywheels – ensure smooth, stable, and reliable blade operation. Manual feed and height adjustment – provide complete operator control over the cutting process and machine settings. Integrated blade cooling system – prevents blade overheating and extends blade service life. Blade guard – enhances operator safety in compliance with applicable safety standards. Rigid machine frame – minimizes vibration and ensures consistently straight, accurate cuts. Construction and Technology The CORMAK E910 is built on a rigid four-column frame with reinforced rear support, providing exceptional structural stability. It is equipped with a high-quality 35 mm wide, 4,013 mm long bandsaw blade operating at a speed of 20 m/s, ensuring fast, efficient, and accurate cutting. The cutting head is manually operated, giving the operator full control over the cutting process and allowing precise adjustment to different workpieces. As standard, the machine includes a 12-litre coolant reservoir, significantly reducing blade wear and improving cutting performance. Precision and Productivity Bedpfx Ansvvr Sxeuswr The CORMAK E910 has been designed for continuous operation in sawmills and wood-processing facilities. Its substantial weight (488 kg), wide rail base, and dynamically balanced flywheels provide excellent cutting accuracy and repeatability. With a maximum cutting thickness of 475 mm, the machine easily handles large-diameter logs. The kerf width of just 1.4–2.2 mm minimizes material waste and maximizes timber yield. Standard Equipment 4,013 mm bandsaw blade 6,000 mm rail track set Blade cooling and lubrication system Blade guard Adjustable log clamp/stop FREE bandsaw blade – machine supplied ready for operation Technical Specifications Specification Value Power supply 400 V Motor power 7.5 kW (10.2 HP) Maximum cutting width 915 mm Maximum blade height 740 mm Minimum blade height 55 mm Maximum cutting thickness 475 mm Maximum cutting length 6,000 mm Blade guard Yes Blade width 35 mm Blade length 4,013 mm Flywheel diameter 470 mm Flywheel width 25 mm Blade speed 20 m/s Kerf width 1.4–2.2 mm Coolant tank capacity 12 L Feed system Manual Machine dimensions (L × W × H) 6,000 × 1,980 × 1,810 mm Net weight 488 kg

Condition: new, Year of construction: 2026, DCV7500E Industrial Dust Collector The DCV7500E is a premium-class industrial dust collector engineered for demanding manufacturing environments. Its robust construction, exceptionally high extraction capacity, and advanced filtration capabilities make it the ideal solution for large woodworking facilities requiring clean air, reliable performance, and continuous-duty operation. Key Features High extraction capacity of 7,500 m³/h, ideal for operating multiple machines simultaneously Large 18 m² filtration area for efficient capture of fine dust particles 35 polyester filter cartridges with 5-micron filtration for improved air quality throughout the production facility Heavy-duty steel construction designed to withstand vibration and intensive industrial use Dynamically balanced metal impeller ensures smooth, quiet, and reliable operation Construction and Technology The DCV7500E is equipped with a Ø280 mm inlet port, providing exceptionally high airflow capacity for centralized dust extraction systems. Its metal impeller features aerodynamically optimized blades that maximize extraction performance while reducing noise levels. The airtight extraction system minimizes air leakage and efficiently separates wood chips, shavings, and fine dust particles, ensuring high operating efficiency. Performance and Efficiency Operating at an air intake velocity of 28–32 m/s, the DCV7500E delivers highly effective dust extraction even under fluctuating production loads. Powered by a 5.5 kW motor running at 3,000 rpm, the unit maintains consistent suction performance throughout continuous operation, regardless of the number of connected machines. Applications The DCV7500E is ideally suited as a centralized dust extraction system for woodworking factories and industrial production facilities operating equipment such as: Belt sanders and wide belt sanders Sliding table saws and panel saws Spindle moulders Edge banders and planers Automated woodworking production lines The unit is not intended for extracting wet materials or for use in hazardous or potentially explosive environments. Bwsdpfxsvzqtxo Anuor Standard Equipment 35 polyester filter cartridges (5-micron filtration) Ø280 mm inlet port Sealed waste collection containers Optional Equipment HEPA filter for capturing ultra-fine dust particles Automatic filter cleaning system Overhead ducting system for centralized installation Technical Specifications Specification Value Motor Power 5.5 kW / 400 V Motor Speed 3,000 rpm Airflow Capacity 7,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø280 mm Air Intake Velocity 28–32 m/s Total Filtration Area 18 m² Filter Material Polyester, 5 microns, Filter Class "G" Number of Filters 35 Overall Dimensions 2800 × 970 × 2260 mm Weight 306 kg

Condition: new, Year of construction: 2026, DCV4500E Industrial Dust Collector The DCV4500E is a high-performance industrial dust collector designed for continuous operation in high-dust environments. This advanced extraction system meets the demands of manufacturing facilities where efficient removal of dust and wood chips is essential for maintaining product quality and workplace safety. Its compact housing, robust construction, and impressive extraction capacity of 4,500 m³/h make it an ideal solution for woodworking shops, furniture manufacturers, and production lines requiring a centralized dust extraction system. Key Features Smooth and quiet operation thanks to a dynamically balanced metal impeller High dust extraction efficiency with an air intake velocity of up to 32 m/s 12 polyester filter cartridges with filtration efficiency down to 5 microns Suitable for connecting multiple machines in an overhead centralized extraction system Energy-efficient fan with optimized airflow design Airtight construction minimizes dust emissions into the working environment Easy operation and maintenance with a quick waste bag replacement system Construction and Technology The DCV4500E features a reinforced steel frame that minimizes vibration and ensures quiet operation. The extraction system is equipped with a Ø200 mm inlet port, providing high airflow capacity and an extended extraction range. The 12 filter cartridges deliver efficient filtration of dust and wood chips, while the engineered design helps reduce heat loss within the production facility. Bjdpfxjuc Uche Anuowr Performance and Efficiency Thanks to its optimized fan design and 3.0 kW (S1) motor, the DCV4500E delivers high extraction performance while maintaining low energy consumption. The system is designed for continuous-duty operation and provides consistent suction power throughout the entire working cycle. It is an excellent solution for operating multiple woodworking machines simultaneously within a centralized dust collection system. Applications The DCV4500E is suitable for use in: Woodworking workshops Furniture manufacturing facilities Production of doors, windows, and wooden components Manufacturing lines with multiple connected machines The unit is compatible with machines such as sanders, edge banders, panel saws, and sliding table saws. It is not recommended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 12 polyester filter cartridges (5-micron filtration) 2 waste collection bags Ø200 mm metal inlet port Optional Equipment HEPA filter for particles smaller than 1 micron Ø200 mm extraction hose Ceiling-mounted suspension system for overhead installation Technical Specifications Specification Value Motor Power (S1) 3.0 kW / 400 V, 50 Hz Motor Speed 2,900 rpm Airflow Capacity 4,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Air Intake Velocity 28–32 m/s Inlet Diameter Ø200 mm Number of Filters 12 Filter Material Polyester, 5 microns, Filter Class "G" Filter Dimensions 170 × 1035 mm Overall Dimensions 1530 × 665 × 2200 mm Weight 120 kg

Condition: new, Year of construction: 2025, DCV6000E Industrial Dust Collector The DCV6000E is an advanced industrial dust collector designed for the efficient extraction of wood chips, shavings, and dust from multiple workstations simultaneously. Engineered for continuous, heavy-duty operation in manufacturing environments, it delivers consistent suction performance and maintains excellent air quality throughout the production facility. Its reinforced construction and dynamically balanced impeller ensure quiet, reliable, and low-maintenance operation. Key Features Exceptional extraction capacity of 6,000 m³/h, ideal for operating multiple machines simultaneously Ø250 mm inlet port providing high airflow capacity and compatibility with centralized dust extraction systems 28 polyester filter cartridges with 5-micron filtration and a total filtration area of 14 m² Ceiling-mounted design for space-saving installation and easy system expansion Sealed waste bag replacement system for clean and convenient maintenance Energy-efficient operation thanks to an optimized fan blade design and a highly airtight extraction system Construction and Technology The DCV6000E is built with a heavy-duty hardened steel housing designed to withstand deformation and minimize vibration. At the core of the system is a dynamically balanced metal impeller, reducing noise while ensuring stable operation under high airflow conditions. The large-surface polyester filter cartridges effectively capture dust particles as small as 5 microns. An optional HEPA filtration system is available for applications requiring the highest air quality standards. Performance and Efficiency Powered by a 3.8 kW (S1) motor operating at 3,000 rpm, the DCV6000E achieves an air intake velocity of 28–32 m/s. This enables efficient dust extraction for multi-machine woodworking lines and automated production systems, regardless of workload intensity. The unit is designed for continuous-duty operation, maintaining stable performance throughout extended production cycles. Applications The DCV6000E is ideally suited for furniture manufacturing plants, industrial woodworking facilities, CNC production lines, and other environments where large volumes of wood dust are generated. Bwsdpfxouc U Nbo Anuor The unit is compatible with: Sliding table saws and panel saws Wide belt sanders Edge banders and planers CNC woodworking machines Standard Equipment 28 polyester filter cartridges (5-micron filtration) Galvanized steel housing Metal impeller and extraction chamber Sealed waste collection bags Optional Equipment HEPA filter Extraction hoses and system manifolds Waste container fill level sensors Technical Specifications Specification Value Motor Power (S1) 3.8 kW / 400 V, 50 Hz Motor Speed 3,000 rpm Airflow Capacity 6,000 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø250 mm Air Intake Velocity 28–32 m/s Total Filtration Area 14 m² Number of Filters 28 Filter Material Polyester, 5 microns, Filter Class "G" Overall Dimensions (L × W × H) 2000 × 625 × 2150 mm Weight 262 kg